溶胶凝胶辅助水热可控合成ZnO不同形貌分级结构光催化剂

以Zn(NO3)2·6H2O、柠檬酸和Na OH为原料,采用溶胶凝胶(sol-gel)辅助水热法,仅通过改变水热时间,就可得到片花、棒花及梭状3种不同形貌ZnO分级结构。利用XRD、SEM、UV-Vis DRS、光致发光光谱(PL)和氮低温吸附-脱附等手段对合成的ZnO样品进行了表征。推测了合成条件下不同形貌ZnO分级结构形成的机理。以活性翠兰(KGL)为模拟印染废水,考察了其光催化活性。结果表明,虽然所合成的不同形貌的ZnO样品在光照120 min后均能使KGL降解78%以上,但其中水热4 h得到的片花状ZnO光催化性能最好,可降解99%的KGL,这与其片花状的形貌、较大的比表面积、较多的表面氧缺陷和极性面有关。     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜（SEM）、Ｘ射线衍射（XRD）、光致发光光谱（PL）和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比n_Zn²⁺/n_OH^-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱（UV-Vis）并结合低温氮吸附-脱附比表面测试（BET）,研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

层状、花形和棒状钛酸铋纳米结构的可控合成及光催化性能

通过可控水热法,制备出层状、花形和棒状钛酸铋(Bi₄Ti₃O₁₂,BIT)纳米结构。通过X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)观测其结构和形貌特征。XRD图显示,所制备的样品为层状钙钛矿结构。FESEM结果表明,通过控制水热过程的反应参数可以得到不同形貌的纳米粉体。紫外-可见漫反射光谱(UV-VisDRS)表明BIT样品的带隙能约为2.63~2.95eV。利用可见光(λ>420nm)照射下的甲基橙降解实验评价了BIT样品的光催化性能。结果表明,BIT的光催化活性比掺氮TiO₂(N-TiO₂)高得多。所制备的层状BIT纳米结构光催化效率最高,经可见光照射360min,甲基橙溶液的降解率可达95.0%。同时还研究了结构和形貌对不同条件下制备的BIT样品光催化活性的影响。     

球形、花形和线状钒酸铋的可控合成及光催化性能

通过无模板、无助剂的可控水热法, 制备出球形、花形和线状钒酸铋(BiVO₄), 研究了其光学和可见光催化性能. 通过X射线衍射(XRD)和透射电镜(TEM)观测其结构和形貌特征. XRD谱线显示, 所制备的样品为单斜晶体结构. TEM结果表明, 通过控制水热过程的反应参数可以得到不同形貌的纳米粉体. 基于不同条件下制备的样品的微结构分析, 提出了这些不同形貌的形成机制. 紫外-可见漫反射光谱(UV-Vis DRS)表明BiVO₄样品的带隙能约为2.19-2.33 eV. 利用可见光(λ>420 nm)照射下的罗丹明B(RhB)降解实验评价了BiVO₄样品的光催化性能. 结果表明, BiVO₄的光催化活性比商用TiO₂催化剂P25 和掺氮TiO₂ (N-TiO₂)高得多. 所制备的球形BiVO₄光催化效率最高, 经可见光照射180 min, RhB溶液的降解率可达100%. 系统地研究了结构和形貌对不同pH值下制备的BiVO₄样品光催化活性的影响.     

不同形貌Bi4Ti3O12粒子的可控合成及光催化性能

研究了用一步水热法制备的不同形貌的钛酸铋(Bi₄Ti₃O₁₂, BIT)粒子的光学和可见光催化性能, 并对其晶体结构和微观结构用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段进行了表征. XRD结果表明, 所制备的BIT 样品为层状钙钛矿结构. FESEM结果表明, 通过控制水热过程的反应参数可以得到不同形貌的纳米粒子. 紫外-可见漫反射光谱(UV-Vis DRS)表明BIT 样品的带隙能约为2.88-2.93 eV. 利用可见光(λ>420 nm)照射下的甲基橙(MO)降解实验评价了BIT 样品的光催化性能. 结果表明, BIT 的光催化活性比掺氮TiO₂ (N-TiO₂)高得多. 研究了形貌对BIT 光催化性能的影响. 所制备的BIT纳米带光催化效率最高, 经可见光照射360 min, 甲基橙溶液的降解率可达到95.0%.     

水热法制备具有高光催化活性的镧掺杂二氧化钛纳米晶

采用水热法合成钛酸钾(K₂Ti₈O₁₇)纳米棒,并将它作为前驱体水热转晶合成TiO₂纳米晶,同时通过在水热体系中引入稀土元素La³⁺实现对TiO₂的La掺杂.考察了不同条件下钛酸盐向TiO₂的转晶过程,发现水热溶液的pH值、温度以及预处理步骤对转晶过程有很大的影响.利用X射线衍射以及透射电子显微镜对样品的晶相和形貌进行了表征.利用电感耦合等离子体原子发射光谱测量了所合成的La掺杂TiO₂样品中的La含量.通过在紫外光下降解甲基橙(MO,10mg/L)测试了La掺杂TiO₂样品的光催化性能.结果表明La掺杂后TiO₂的光催化活性大大提高.在0.15mol/LLa³⁺浓度下180oC水热合成的La掺杂TiO₂样品显示了最佳的光催化活性.其对MO的光催化降解反应常数高达0.11min^-1,大约是空白TiO₂样品的9.20倍,P25TiO₂的3.69倍.     

片花状ZnO@碳球核壳结构的制备及太阳光催化性能

采用水热法合成具有核壳结构的片花状ZnO@碳球系列复合物（ZnO@C）。利用X射线衍射（XRD）,扫描电子显微镜（SEM）,X射线光电子能谱（XPS）,红外光谱（FTIR）,紫外可见漫反射光谱（UV-Vis DRS）,荧光光谱（PL）以及N₂吸附-脱附等技术对所合成样品进行表征,结果表明,碳球被ZnO纳米片包裹形成具有核壳结构的片花状复合物,碳球的存在增加了ZnO对可见光的吸收,有效抑制了光生电子空穴对的复合。在模拟太阳光下,对活性染料GR黑及甲硝唑的光催化降解测试结果显示,ZnO@C系列复合物的光催化性能均高于纯ZnO,其中ZnO@C-2样品表现出最好的光催化性能,其光催化降解GR黑和甲硝唑的速率分别为纯ZnO的4.2倍和2.1倍。     

圆形片状纳米复合材料Ag/ZnO-ZrO2微波辅助合成与多模式光催化罗丹明B

采用微波辅助结合沉淀法制备了以ZnO为主体的纳米复合材料Ag/ZnO-ZrO₂。通过X射线粉末衍射(XRD)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和N2吸附-脱附等表征手段研究了微波辐射对Ag/ZnO-ZrO₂晶型结构、形貌及表面物理化学性质的影响。结果表明, 在200 W微波辐射作用下, 该样品晶型结构未发生明显变化, 但Ag的衍射峰明显增强, 同时, 其晶粒尺寸、光吸收性质和表面物理化学性质等方面则发生改变, 尤其是样品Ag/ZnO-ZrO₂的形貌呈现了圆形片状结构。分别在紫外和微波辅助条件下对纳米复合材料的光催化性能进行了一系列考察, 同时为了进一步评价所合成样品在太阳光作用下的实用价值, 又考察了Ag/ZnO-ZrO₂在模拟日光条件下的光催化性能。结果显示, 紫外光作用下, 纳米复合材料Ag/ZnO-ZrO₂的光催化活性高于市售P25以及未经微波处理的样品, 且在微波辅助光催化条件下, 其活性有较大程度提高。200 W微波功率下所合成样品Ag/ZnO-ZrO₂在模拟日光作用下显现出较高活性。另外, 根据紫外光条件下对光催化活性物种的捕获实验提出了Ag/ZnO-ZrO₂可能的光催化机理。     

前处理时间对Co3O4形貌及光催化性能的影响

以CoCl₂、Na₂CO₃为原料, 以油酸钠(SOA)为表面活性剂, 采用水热-热分解法合成了纯相尖晶石结构的Co₃O₄粉体。利用TG-DTA, XRD和SEM等手段跟踪反应过程, 研究了不同水热时间对产物形貌和结构的影响, 并根据实验结果分析了可能的反应机理及结构对光催化性能的影响。实验结果表明:制备前驱体的水热时间是影响产物形貌的关键因素, 并且终产物的结构形貌很大程度上决定了其光催化性能。     

自生长燃烧法合成纳米铁酸钇固溶体光催化剂

以硝酸铁和硝酸钇作为前驱体,甘氨酸为燃料用自生长燃烧法合成了可见光光催化剂YFeO₃及其固溶体。样品通过X射线粉末衍射(XRD)、N₂吸附、紫外-可见漫反射(UV-Vis DRS)、扫描电子显微镜(SEM)和透射电镜(TEM)等表征了其晶相结构、BET比表面积和形貌。结果表明掺杂一定量的金属能有效地提高自生长燃烧法合成的YFeO₃的纯度,所合成的样品晶粒大小约为55 nm。与YFeO₃相比其固溶体吸收边红移。光催化降解亚甲基蓝(MB)和罗丹明B(RhB)结果表明YFeO₃及其固溶体均具有活性,Bi修饰的YFeO₃表现出最高的光催化活性,而且对于不同染料的降解程度不同。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.