铜电化学沉积在微孔金属化中的应用

以分布有微孔的印刷线路板(PCB)作为模板,按照PCB孔金属化工艺路线,研究乙醛酸化学镀铜和柠檬酸盐体系铜电沉积工艺在PCB微孔金属化中的应用.结果表明,乙醛酸化学镀铜和柠檬酸盐体系电沉积铜可以成功地应用于PCB微孔金属化加工工艺中.微孔化学镀铜金属化导电处理后,铜附着于微孔内壁,颗粒细小,但排列疏松且局部区域发生漏镀现象.微孔一经电镀铜加厚,镀层电阻显著下降;孔壁内外的铜沉积速率达到0.8:1.0;铜颗粒具有一定的侧向生长能力,能够完全覆盖化学镀铜时产生的微小漏镀区域;微孔内壁铜镀层连续、结构致密并紧密附着于内壁,大大增强了PCB上下层互连的导电性能.     

聚合物表面金属化修饰研究进展

聚合物表面的金属化修饰是一项应用十分广泛的技术,其在保持了聚合物材料质轻易加工特点的同时赋予制品表面美观、耐磨、机械强度高、电学、热学等新的特点,已成为聚合物表面精细化加工的重要手段。经过表面金属化修饰的聚合物材料,具有极高的应用价值和广阔的市场前景,在生产和生活的各个领域都发挥着重要的作用,近年来发展很快。本文从聚合物表面金属化的工艺方法、表征手段和金属化后的作用三个方面对聚合物表面金属化修饰的研究进展进行了综述。     

高密度互连印制电路板孔金属化研究和进展

孔金属化互连是印制电路板（PCB）高密度集成的核心制程之一,化学镀铜和电子电镀铜是实现孔金属化的关键技术。本文介绍HDI-PCB的概念和制作流程;综述化学镀铜和电子电镀铜孔金属化互连的研究和进展,包括溶液组成和操作条件的影响,添加剂及其相互作用机理,以及盲孔填充和通孔孔壁加厚机制;展望高密度互连印制电路板电子电镀基础研究及新技术发展方向。     

自组装膜吸附钯的化学镀前活化研究

提出了一种无需氯化亚锡敏化、基于分子自组装膜（SAMs）吸附钯的活化方法,成功地引发了在氧化铝粉末表面的化学镀铜.用XPS、AES、FTIR研究了钯的吸附机理,认为是由于氯化钯与SAMs上向外突出的氨基形成了化学键,并提出了相应的活化机理.金属化产物经XRD、FTIR、剖面金相显微表征分析与压片电阻率测定,示为金属铜完全包覆氧化铝的复合材料.该活化工艺具有活性引发层厚度薄、寿命长和与基底结合力强等优点,也可应用于其它表面富羟基的基底材料.     

基于紫外光/臭氧化学改性-选择性化学镀的聚甲基丙烯酸甲酯表面区域金属化

研究以紫外光光化学反应为基础的在聚甲基丙烯酸甲酯(PMMA)表面区域选择性金属化的方法. 通过对无臭氧紫外光、紫外光+臭氧(UV/O₃)、臭氧对PMMA表面亲水化改性效果的对比, 发现仅有UV/O₃可有效地使PMMA表面亲水. 表面红外光谱表明, UV/O₃对PMMA表面协同作用的结果是在辐照区域生成了羧基等含氧活性基团. 以此含氧活性基团为基础, 经过胺化、氯金酸阴离子交换、NaBH₄还原等表面反应, 在UV/O₃作用区域形成化学镀所必须的金纳米催化中心, 再将PMMA浸入镀金、镀铜等化学镀浴中, 即可实现PMMA表面的区域金属化. 以打印的菲林片为原始掩膜, 该方法分辨率可达50 μm或更小. 以该法制备了金和铜的薄膜微电极、金膜微电热器等金属微器件, 并表征了它们的物理化学性能.     

聚合物表面自组装电极的制备

采用在聚合物表面制备选择性化学镀电极的方法, 将具有电极结构的模板置于聚萘二甲酸乙二醇酯(PEN)基片表面上, 用紫外光进行照射, 使辐照区域表面形成羧基, 然后通过配位作用使银离子附着到表面上, 再经过紫外光照射还原出金属银颗粒, 最后以表面的金属银颗粒为催化剂进行特定区域化学镀铜形成电极. 利用四探针法测得电极的电阻率为5.063×10-2 Ω·mm2/m, 与纯金属铜的电阻率的数量级相同.     

芯片制造中的化学镀技术研究进展

芯片制造中大量使用物理气相沉积、化学气相沉积、电镀、热压键合等技术来实现芯片导电互连. 与这些技术相比, 化学镀因具有均镀保形能力强、工艺条件温和、设备成本低、操作简单等优点, 被人们期望应用于芯片制造中, 从而在近年来得到大量的研究. 本综述首先简介了芯片制造中导电互连包括芯片内互连、芯片3D封装硅通孔(TSV)、重布线层、凸点、键合、封装载板孔金属化等制程中传统制造技术与化学镀技术的对比, 说明了化学镀用于芯片制造中的优势; 然后总结了芯片化学镀的原理与种类、接枝与活化前处理方法和关键材料; 并详细介绍了芯片内互连和TSV互连化学镀阻挡层、种子层、互连孔填充、化学镀凸点、再布线层、封装载板孔互连种子层以及凸点间键合的研究进展; 且讨论了化学镀液组成及作用, 超级化学镀填孔添加剂及机理等. 最后对化学镀技术未来应用于新一代芯片制造中进行了展望.     

Cu/S-TiO2光催化剂的制备及其可见光催化性能

分别采用化学镀铜法、化学还原法、浸渍法制备了3种Cu负载的S-TiO2光催化剂,综合利用UV-Vis、XRD、XPS、EXAFS、SEM和FESEM技术对制备的Cu/S-TiO2光催化材料的结构和光电子性能进行了表征.结果表明,化学镀铜法和浸渍法负载的铜物种为Cu2O和CuO,化学还原法制备的铜为Cu和Cu2O.化学镀铜法制备的Cu/S-TiO2光催化剂不仅对可见光具有很强的吸收能力,而且负载的铜物种连续、均匀地分散在S-TiO2表面,这种结构有利于光生电子的捕获、转移和分离.因此,化学镀铜法制备的Cu/S-TiO2在不同可见光波段(λ>420 nm,λ>500 nm)条件下光催化重整甲醇水溶液制氢反应中都表现出最高的催化活性,同时在模拟太阳光条件下以及稳定性实验的测试中也表现出优秀的性质,因此对其催化作用/反应机理进行了探讨.     

玻璃纤维的表面金属化

采用以甲醛为还原剂、EDTA·Na2和TART·KNa为络合剂的双络合剂体系对玻璃纤维表面进行了化学镀铜.结果表明,在玻璃纤维表面上成功镀覆上一层致密、亮铜色的铜镀层.     

氯化钯掺杂的羧基丁苯胶乳薄膜的制备及用于化学镀铜性能

利用羧基丁苯胶乳优良的成膜性能,并通过氯化钯掺杂使薄膜具备催化化学镀的活性,在其表面进行化学镀铜研究,选用次亚磷酸钠和硼氢化钠为还原剂,将硫酸铜还原成单质铜。 采用扫描电子显微镜（SEM）、能量色散谱（EDS）和X射线衍射（XRD）等对其形貌、成分进行表征。 测试了胶膜的增重率、表面金属及沉积层的结合牢度。 结果表明,薄膜的表面形成均匀致密、导电性优良和结合力良好的铜层。 该方法可应用于平面非金属材料如聚酯透明材料、装饰板材等,获得了良好导电表面,形成具有电磁屏蔽功能的面型材,具有广阔应用前景。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.