Dawson型磷钨钼杂多酸的制备及其对H2O2氧化环己酮制己二酸的催化

采用水热法制备了新型H6P2W9Mo9O62.24H2O催化剂,并用UV-Vis、FT-IR和TG-DTA等测试技术对催化剂进行了表征。以微波促进30%过氧化氢氧化环己酮制备己二酸合成反应为探针,考察了催化剂的催化性能。通过正交实验探讨了几种因素对反应的影响,确定了优化工艺条件为:n(环己酮)∶n(过氧化氢)∶n(草酸)∶n(催化剂)=100∶400∶1.25∶0.25,反应温度100℃,微波辐射功率400 W,反应时间3.5 h,己二酸产品的收率达87.33%,纯度可达99.7%。反应结束后,将反应后含催化剂的溶液浓缩至一定浓度,催化产率降低,重复使用5次收率降低为45.89%。     

Dawson结构磷钨酸镧催化绿色合成己二酸

通过复分解法制备出Dawson结构磷钨酸镧(La H3P2W18O62·n H2O),采用FT IR、SEM对其进行了表征,并将其用于催化30%H2O2氧化环己酮合成己二酸。考察了其用量、30%H2O2用量、反应时间、反应温度及重复套用次数对己二酸收率的影响。结果表明,自制磷钨酸镧具有Dawson结构,呈椭球状。优化合成工艺条件为:n(环己酮)/n(30%H2O2)=100/500,w(磷钨酸镧)=6.4%(基于环己酮的质量),反应温度100℃,反应时间5.5h。优化反应条件下,己二酸的收率最高可达86.5%。磷钨酸镧重复套用5次,己二酸收率仍可保持为74.1%。     

Na_2WO_4催化H_2O_2氧化环己烯合成己二酸反应研究

以Na2WO4为催化剂,H2O2(30wt.%)为氧化剂,考察了环己烯合成己二酸过程中反应条件的影响。采用单因素实验确定最佳的反应条件:反应体系的物料比为Na2WO4·2H2O∶H3PO4∶H2O2∶C6H10=5∶20∶400∶100(mmol比),Na2WO4与H2O2加热回流温度为60℃,加热回流时间为30 min,反应温度为102℃,反应时间为2 h,此时己二酸的产率最高为63%。采用正交实验法确定影响己二酸产率的三个主要因素顺序为:反应温度Na2WO4与H2O2加热回流时间Na2WO4与H2O2加热回流温度。     

回收灯用钨丝在H2O2催化氧化环己酮合成己二酸中的应用

以回收灯用钨丝为催化剂前驱物,30％H2O2为氧源,催化氧化环己酮合成了己二酸,反应体系中无须使用有机溶剂、酸性助剂和相转移剂。 IR和TG分析表明,钨丝与H2O2反应生成的新生态过氧钨酸是催化活性成分,合成己二酸后转化为钨酸。 钨丝为催化剂前驱物合成己二酸适宜反应条件为：100 mmol环己酮,50 mL 30%H2O2,钨丝的摩尔用量为环己酮摩尔数的1.5%,回流反应6 h,己二酸收率63.7%。 比相同反应条件下用钨酸和WO3为催化剂的收率高10%~18%。     

有机-无机杂化钨(钼)过氧配合物催化合成己二酸

以1,10-菲啰啉(Phen)作N,N配体制备了双核同多钨(钼)杂化过氧配合物H2M2O3(O2)4.2Phen(M:W、Mo),为己二酸的绿色合成提供了一类双功能催化剂。通过元素分析、重量法、化学滴定法、TG/DSC、IR和UV-Vis测试技术对其组成和结构进行了表征。在不使用有机溶剂和相转移催化剂的条件下,考察了它们催化30%的H2O2氧化环己烯、环己醇和环己酮合成己二酸的催化活性。实验结果表明,钨过氧配合物的催化活性较好,钼过氧配合物的催化活性差;以H2W2O3(O2)4.2Phen.H2O作催化剂,反应条件为n(底物)∶n(催化剂)∶n(H2O2)=100∶1.2∶440,反应温度为90℃,反应12 h,从环己烯、环己醇和环己酮到己二酸的收率分别为89.9%、53.5%和64.8%。     

Dawson结构磷钨酸银催化绿色合成己二酸

以自制新型Dawson结构磷钨酸银(Ag3H3P2W18O62·n H2O)为催化剂,催化30%H2O2氧化环己酮合成己二酸,并采用FT-IR、SEM对催化剂进行表征。考察了催化剂用量、30%H2O2用量、反应时间、反应温度及催化剂重复套用次数等因素对反应的影响。结果表明:自制磷钨酸银具有Dawson结构,并且在多次使用后仍保持Dawson结构不变。单个磷钨酸银呈"棒球状"(平均粒径200~300 nm)。优化合成条件为:w(催化剂)=6.4%(基于环己酮质量),n(环己酮):n(30%H2O2)=100∶400,反应温度100℃,反应时间5.0 h。在此条件下,己二酸收率为81.4%。该催化剂具有良好的重复使用性能,重复使用五次时己二酸收率基本不变,是合成己二酸的高效、经济、绿色催化剂。     

钨化合物催化过氧化氢氧化环己酮合成己二酸

在无相转移催化剂的条件下,用Na2WO4·2H2O 或 H7[P(W2O7)6]·xH2O为催化剂,30% H2O2可以将环己酮高产率地氧化成己二酸.钨催化剂用量、反应液酸度对反应结果有着重要的影响.当钨原子与环己酮的摩尔比为1.5%,反应初始液的pH值为1.0时,己二酸的得率可达82%;而且催化体系具有很好的可循环性.     

Cr_2O_7~(2-)/Cr~(3+)间接氧化环己醇合成己二酸

以Cr2O72-/Cr3+作为间接氧化剂电氧化环己醇制备己二酸.应用正交实验优化工艺条件,得出在原料比n(环己醇)∶n(Cr2O72-)=0.4∶1,t=35℃和CH2SO4=5mol.L-1条件下己二酸的收率可达70.29%.同时研究了Ag2SO4、(NH4)2SO4、H2SO4浓度、电流密度对Cr3+电氧化为Cr2O72-的影响,Cr3+的转化率可达82.52%.     

固体超强酸催化剂SO_4~(2-)/TiO_2-WO_3的制备及其催化性能研究

制备了固体超强酸催化剂SO2 -4/TiO2 WO3 ,并以丁酸丁酯的合成作为探针反应 ,系统考察了WO3 的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2 -4/TiO2 WO3 催化活性的影响 .实验表明 :制备催化剂的适宜条件为m(H2 WO4) =12 5 % ,硫酸浸渍浓度为 1 0mol·L-1,焙烧温度为 5 80℃ ,活化时间 3h .利用优化条件下制备的催化剂SO2 -4/TiO2 WO3 催化合成缩醛 (酮 ) ,在醛 /酮与二元醇 (乙二醇 ,1,2 丙二醇 )的投料摩尔比为 1∶1 5 ,催化剂的用量占反应物总投料质量的 0 5 % ,反应时间为 1h条件下 ,2 甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 78 7% ,2 ,4 二甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 83 0 % ,环己酮 -乙二醇缩酮的收率为 85 9% ,环己酮 1,2 丙二醇缩酮的收率为 84 6% ,丁酮 -乙二醇缩酮的收率为70 7% ,丁酮 1,2 丙二醇缩酮的收率为 88 3 % ,2 丙基 1,3 二氧环戊烷的收率为 80 6% ,4 甲基 2 丙基 1,3 二氧环戊烷的收率为 79 6% ,2 异丙基 1,3 二氧环戊烷的收率为 64 2 % ,4 甲基 2 异丙基 1,3 二氧环戊烷的收率为 83 3 % ,2 苯基 1,3 二氧环戊烷的收率为 75 3 % ,4 甲基 2 苯基 1,3 二氧环戊烷的收率为 95 1% .     

氯化铜催化邻二甲苯与环己酮的分子氧共氧化

以Cu(Ⅰ、Ⅱ)的氯化物为催化剂,在常压液相催化分子氧氧化环己酮的同时,邻二甲苯得到较高程度的共氧化.其中,当以CuC l2.2H2O为催化剂、乙酸正丁酯为溶剂时,90℃反应10 h,环己酮及邻二甲苯转化率分别可达96.8%和74.2%,己二酸、邻甲苯甲酸及邻甲苯甲醛的收率分别可达93.3%、42.0%和31.7%.探讨了催化剂、溶剂、反应温度及反应物用量等对共氧化行为的影响.     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.