固支矩形Mindlin板弯曲问题的辛求解体系

本文利用二类变量广义变分原理推出了Mindlin板弯曲问题的Hamilton体系,利用辛几何方法对全状态向量进行分离变量,得到相应的横向本征问题,在求出其本征值后,按本征函数展开法导出了原问题的辛本征通解。给出了一个承受集中载荷的四边固支矩形薄板的算例,按本文求解体系得到的解与经典解吻合较好。本文直接从Mindlin板弯曲问题出发,在其Hamilton体系内使用辛几何方法给出了的一套新的求解体系,突破了传统解法的局限性,具有一般性及较高的理论推广价值。     

双材料环扇形薄板弯曲问题的辛本征解

弹性力学辛对偶求解方法是通过引入原变量的对偶变量将问题导入辛空间,从而使得有效的数学物理方法,如分离变量和辛本征函数展开的方法得以实施并得出问题的解析解。本文通过引入弯矩函数和恰当的变换,首先建立了两侧边边界条件自由的双材料环扇形薄板弯曲问题的辛对偶体系。然后,讨论了弯矩函数表示的非齐次边界条件,并给出了三个有特定物理意义的解,其解在端部的力系是非自相平衡的。对双材料的楔形板而言,这三个解表示的就是在尖端有集中弯矩、集中扭矩、垂直集中力作用的解。最后,讨论了弯矩函数表示的齐次边界条件,并给出了辛本征值的超越方程以及辛本征解,所有这些解在端部的力系都是自相平衡的。本文的工作为相关问题的解析求解以及辛本征解的进一步应用研究奠定了基础。     

四边固支矩形弹性薄板的精确解析解

利用辛几何方法本文推导出了四边固支矩形弹性薄板弯曲问题的精确解析解.由于在求解过程中不需要事先人为的选取挠度函数,而是从弹性薄板的基本方程出发,首先将矩形薄板弯曲问题表示成Hamilton正则方程,然后利用分离变量和本征函数展开的方法求出可以完全满足四边固支边界条件的精确解析解.本文中所采用的方法突破了传统的半逆法的限制,使得问题的求解更加合理化.文中还给出了计算实例来证明推导结果的正确性.     

四边任意支承条件下弹性矩形薄板弯曲问题的解析解

利用辛几何法推导出了四边为任意支承条件下矩形薄板弯曲的解析解。在分析过程中首先把矩形薄板弯曲问题表示成Hamilton正则方程，然后利用辛几何方法对全状态相变量进行分离变量，求出其本征值后，再按本征函数展开的方法求出四边为任意支承条件下矩形薄板弯曲的解析解。由于在求解过程中并不需要人为的事先选取挠度函数，而是从弹性矩形薄板弯曲的基本方程出发，直接利用数学的方法求出问题的解析解，使得这类问题的求解更加理论化和合理化。文中的最后还给出了计算实例来验证本文方法的正确性。     

矩形悬臂薄板的解析解

首先把弹性薄板弯曲问题的控制方程表示成为Hamilton正则方程,然后利用辛几何方法对全状态相变量进行分离变量,求出其本征值后,再按本征函数展开的方法求出矩形悬臂薄板的解析解。由于在求解过程中不需要事先人为地选取挠度函数,而是从薄板弯曲的基本方程出发,直接利用数学的方法求出可以满足其边界条件的这类问题的解析解,使得问题的求解更加理论化和合理化。文中的最后还给出了计算实例来验证本文所采用的方法以及所推导出的公式的正确性。     

变截面电磁波导的辛分析

电磁波导的求解可将基本方程导向Hamilton体系、辛几何的形式。横向的电场和磁场构成了对偶向量。辛体系便于处理不同介质波导的界面连接条件。正则对偶方程、分离变量法、Hamilton算子矩阵本征值问题、共轭辛正交归一关系、本征解的展开定理等整套理论,可以适用于多种波导的课题,有利于不同截面的波导连接、以及与共振腔的连接等。本文分析了两段不同材料不同截面对接的平面波导作为例题,表明辛体系用于波导的分析是有力的。     

基于辛体系的正交各向异性地基梁解析解

基于二维弹性理论, 利用Hellinger-Reissner变分原理, 通过引入对偶变量, 推导 了双参数地基上正交各向异性梁平面应力问题的辛对偶方程组; 采用分离变量法和本征展 开方法, 将原问题归结为求解零本征值本征解和非零本征值本征解, 得到了适用于任意横纵 比的梁的解析解. 由于在求解过程中不需要事先人为地选取试函数, 而是从梁的基本方程出 发, 直接利用数学方法求出问题的解, 使得问题的求解更加合理化. 其中, 地基对梁的力学 行为的影响看作是侧边边界条件, 类似于外载, 可通过零本征解的线性展开来评价, 非零本 征值本征解对应圣维南原理覆盖的部分. 还利用哈密顿变分原理, 给出了两端固支梁的 一种新的改进边界条件. 编程计算了细梁和深梁等算例, 研究了地基上梁的变形沿着厚度方 向的变化特性, 验证了辛方法的有效性.     

Hamilton体系下环扇形域的Stokes流动问题

基于极坐标下Stokes流的基本方程,将径向坐标模拟为时间坐标,推导了Hamilton体系下Stokes流动问题的对偶方程,采用本征向量展开法对环扇形域Stokes流动问题进行了分析,并给出了相应的实际算例,其结果说明了本文方法的有效性。     

辛体系下平面热黏弹性圣维南问题的解析解

借助积分变换,将辛体系引入平面热黏弹性问题,建立了基本问题的对偶方程,并将全 部圣维南问题归结为满足共轭辛正交关系的零本征值本征解问题. 同时,利用变量代换和本 征解展开等技术给出了一套求解边界条件问题的具体方法. 算例讨论了几种典型边界条件问 题,描述了热黏弹性材料的蠕变和松弛特征,体现了这种辛方法的有效性.     

四边固支矩形薄板自由振动的哈密顿解析解

在哈密顿体系中利用辛几何方法求解了四边固支矩形薄板自由振动问题的解析解。首先,从基本方程出发,将问题表示成Hamilton正则方程,然后利用辛几何方法导出本征值问题,从而得到本征函数解,使之满足边界条件;再由方程组有非零解的条件,最终推导出四边固支矩形薄板的自振频率方程,得到频率的解析解。计算了不同长宽比情况下四边固支矩形薄板的频率,结果与已有文献完全一致。该解法有望推广至更多尚未得到解析解的矩形板的振动问题。     

Symplectic system based analytical solution for bending of rectangular orthotropic plates on Winkler elastic foundation

This paper analyses the bending of rectangular orthotropic plates on a Winkler elastic foundation.Appropriate definition of symplectic inner product and symplectic space formed by generalized displacements establish dual variables and dual equations in the symplectic space.The operator matrix of the equation set is proven to be a Hamilton operator matrix.Separation of variables and eigenfunction expansion creates a basis for analyzing the bending of rectangular orthotropic plates on Winkler elastic foundation and obtaining solutions for plates having any boundary condition.There is discussion of symplectic eigenvalue problems of orthotropic plates under two typical boundary conditions,with opposite sides simply supported and opposite sides clamped.Transcendental equations of eigenvalues and symplectic eigenvectors in analytical form given.Analytical solutions using two examples are presented to show the use of the new methods described in this paper.To verify the accuracy and convergence,a fully simply supported plate that is fully and simply supported under uniformly distributed load is used to compare the classical Navier method,the Levy method and the new method.Results show that the new technique has good accuracy and better convergence speed than other methods,especially in relation to internal forces.A fully clamped rectangular plate on Winkler foundation is solved to validate application of the new methods,with solutions compared to those produced by the Galerkin method.     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的辛叠加解

研究Winkler地基上正交各向异性矩形薄板弯曲方程所对应的Hamilton正则方程, 计算出其对边滑支条件下相应Hamilton算子的本征值和本征函数系, 证明该本征函数系的辛正交性以及在Cauchy主值意义下的完备性, 进而给出对边滑支边界条件下Hamilton正则方程的通解, 之后利用辛叠加方法求出Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的解析解. 最后通过两个具体算例验证了所得解析解的正确性.     

On new symplectic superposition method for exact bending solutions of rectangular cantilever thin plates

A novel superposition method based on the symplectic geometry approach is presented for exact bending analysis of rectangular cantilever thin plates. The basic equations for rectangular thin plate are first transferred into Hamilton canonical equations. By the symplectic geometry method, the analytic solutions to some problems for plates with slidingly supported edges are derived. Then the exact bending solutions of rectangular cantilever thin plates are obtained using the method of superposition. The symplectic superposition method developed in this paper is completely rational compared with the conventional analytical ones because the predetermination of deflection functions, which is indispensable in existing methods, is dispelled.     

Symplectic solution system for reissner plate bending

Based on the Hellinger-Reissner variatonal principle for Reissner plate bendingand introducing dual variables, Hamiltonian dual equations for Reissner plate bending werepresented. Therefore Hamiltonian solution system can also be applied to Reissner platebending problem, and the transformation from Euclidian space to symplectic space and fromLagrangian system to Hamiltonian system was realized. So in the symplectic space whichconsists of the original variables and their dual variables, the problem can be solved viaeffective mathematical physics methods such as the method of separation of variables andeigenfunction-vector expansion. All the eigensolutions and Jordan canonical formeigensolutions for zero eigenvalue of the Hamiltonian operator matrix are solved in detail, and their physical meanings are showed clearly. The adjoint symplectic orthonormal relation of the eigenfunction vectors for zero eigenvalue are formed. It is showed that the alleigensolutions for zero eigenvalue are basic solutions of the Saint-Venant problem and theyform a perfect symplectic subspace for zero eigenvalue. And the eigensolutions for nonzeroeigenvalue are covered by the Saint-Venant theorem. The symplectic solution method is notthe same as the classical semi-inverse method and breaks through the limit of the traditional semi-inverse solution. The symplectic solution method will have vast application.     

New analytic solutions for static problems of rectangular thin plates point-supported at three corners

This paper deals with the bending of rectangular thin plates point-supported at three corners using an analytic symplectic superposition method. The problems are of fundamental importance in both civil and mechanical engineering, but there were no accurate analytic solutions reported in the literature. This is attributed to the difficulty in seeking the solutions that satisfy the governing fourth-order partial differential equation with the free boundary conditions at all the edges as well as the support conditions at the corners. In the following, the Hamiltonian system-based equation for plate bending is formulated, and two types of fundamental problems are analytically solved by the symplectic method. The analytic solutions of the plates point-supported at three corners are then obtained by superposition, where the constants are obtained by a set of linear equations. The solution procedure presented in this paper offers a rigorous way to yield analytic solutions of similar problems. Some numerical results, validated by the finite element method, are shown to provide useful benchmarks for comparison and validation of other solution methods.     

Bending of annular sectorial Mindlin Plates using Kirchhoff results

This study is concerned with the elastic bending problem of a class of annular sectorial plates whose radial edges are simply supported. Exact bending relationships between the Mindlin plate results and the corresponding Kirchhoff plate solutions have been derived based on the concept of load equivalence. These bending relationships facilitate the deduction of thick (Mindlin) plate results from the corresponding classical thin (Kirchhoff) plate solutions, thus bypassing the need to solve the more complicated governing equations of thick plates. The correctness of the relationships is established by solving the bending problem of annular sectorial plates under a uniformly distributed load and comparing the results with existing thick plate solutions.     

Post-buckling analysis of FGM annular sector plates based on three dimensional elasticity graded finite elements

In this article, post-buckling and non-linear bending analysis of functionally graded annular sector plates based on three dimensional theory of elasticity in conjunction with non-linear Green strain tensor is considered. In-plane normal compressive loads have been applied to either radial, circumferential, or all edges of annular sector plates. Material properties are graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents while Poisson׳s ratio is assumed to be constant. The governing equations are developed based on the principle of minimum total potential energy and solved based on graded finite element method. Non-linear equilibrium equations are solved based on iterative Newton–Raphson method. The effects of material gradient exponent, different sector angles, thickness ratio, loading condition and two different boundary conditions on the post-buckling behavior of FGM annular sector plates have been investigated. Results denote that due to the stretching–bending coupling effects of the FGMs, the post-buckling behavior of movable simply supported FGM plates is not of the bifurcation-type buckling. Moreover, FGM annular sector plates subjected to uniaxial compression at radial edges show a non-linear bending behavior with unique and stable equilibrium paths following a flattening feature.     

板弯曲求解新体系及其应用

建立平面弹性与板弯曲的相似性理论,给出了板弯曲经典理论的另一套基本方程与求解方法,然后进入哈密顿体系用直接法研究板弯曲问题．新方法论应用分离变量、本征函数展开方法给出了条形板问题的分析解,突破了传统半逆解法的限制．结果表明新方法论有广阔的应用前景．     

On new symplectic elasticity approach for exact bending solutions of rectangular thin plates with two opposite sides simply supported

This paper presents a bridging research between a modeling methodology in quantum mechanics/relativity and elasticity. Using the symplectic method commonly applied in quantum mechanics and relativity, a new symplectic elasticity approach is developed for deriving exact analytical solutions to some basic problems in solid mechanics and elasticity which have long been bottlenecks in the history of elasticity. In specific, it is applied to bending of rectangular thin plates where exact solutions are hitherto unavailable. It employs the Hamiltonian principle with Legendre’s transformation. Analytical bending solutions could be obtained by eigenvalue analysis and expansion of eigenfunctions. Here, bending analysis requires the solving of an eigenvalue equation unlike in classical mechanics where eigenvalue analysis is only required in vibration and buckling problems. Furthermore, unlike the semi-inverse approaches in classical plate analysis employed by Timoshenko and others such as Navier’s solution, Levy’s solution, Rayleigh–Ritz method, etc. where a trial deflection function is pre-determined, this new symplectic plate analysis is completely rational without any guess functions and yet it renders exact solutions beyond the scope of applicability of the semi-inverse approaches. In short, the symplectic plate analysis developed in this paper presents a breakthrough in analytical mechanics in which an area previously unaccountable by Timoshenko’s plate theory and the likes has been trespassed. Here, examples for plates with selected boundary conditions are solved and the exact solutions discussed. Comparison with the classical solutions shows excellent agreement. As the derivation of this new approach is fundamental, further research can be conducted not only on other types of boundary conditions, but also for thick plates as well as vibration, buckling, wave propagation, etc.