二维对流扩散方程的高精度全隐式多重网格方法

提出了数值求解二维非定常变系数对流扩散方程的一种时间二阶、空间四阶精度的三层全隐紧致差分格式。为了加快迭代求解隐格式时在每一个时间步上的收敛速度，采用多重网格加速技术，建立了适用于本文高精度金隐紧致格式的多重网格算法。数值实验结果验证了本文方法的精确性、稳定性和对高网格雷诺数问题的强适应性。     

非稳态Hamilton-Jacobi方程的7阶加权紧致非线性格式

Hamilton-Jacobi (HJ) 方程是一类重要的非线性偏微分方程, 在物理学、流体力学、图像处理、微分几何、金融数学、最优化控制理论等方面有着广泛的应用. 由于HJ方程的弱解存在但不唯一, 且解的导数可能出现间断, 导致其数值求解具有一定的难度. 本文提出了非稳态HJ方程的7阶精度加权紧致非线性格式 (WCNS). 该格式结合了Hamilton函数的Lax-Friedrichs型通量分裂方法和一阶空间导数左、右极限值的高阶精度混合节点和半节点型中心差分格式. 基于7点全局模板和4个4点子模板推导了半节点函数值的高阶线性逼近和4个低阶线性逼近, 以及全局模板和子模板的光滑度量指标. 为避免间断附近数值解产生非物理振荡以及提高格式稳定性, 采用WENO型非线性插值方法计算半节点函数值. 时间离散采用3阶TVD型Runge-Kutta方法. 通过理论分析验证了WCNS格式对于光滑解具有最佳的7阶精度. 为方便比较, 经典的7阶WENO格式也被推广用于求解HJ方程. 数值结果表明, 本文提出的WCNS格式能够很好地模拟HJ方程的精确解, 且在光滑区域能够达到7阶精度; 与经典的同阶WENO格式相比, WCNS格式在精度、收敛性和分辨率方面更优, 计算效率略高.      

分数阶导数粘弹性模型的有限元法

在分析分数阶导数三元件模型理论的基础上,把分数阶导数三元件模型引入有限元模型中,推导出具有分数阶导数三元件本构关系的粘弹性结构动力学有限元格式。同时,应用分数阶导数型粘弹性结构动力学方程的数值算法求解了该有限元格式的数值解。并以二维沥青路面结构为例进行了路面动态粘弹性响应分析。算例分析表明,该方法能够正确有效地进行路面动态粘弹性分析。     

三维对流扩散方程的高精度全隐式多重网格方法

提出了数值求解三维非定常变系数对流扩散方程的一种高精度全隐紧致差分格式,该格式在空间上具有四阶精度,时间具有二阶精度。为了克服传统迭代法在每一个时间步上迭代求解隐格式时收敛速度慢的缺点,采用多重网格加速技术,建立了适用于本文高精度全隐紧致格式的多重网格算法,从而大大加快了迭代收敛速度。数值实验结果验证了本文方法的精确性、稳定性和对高网格雷诺数问题的强适应性。     

对流扩散方程的绝对稳定高阶中心差分格式

将作者提出的数值摄动算法改进为区分离散单元内上游和下游并分别对通量进行高精度重构的双重数值摄动算法,与原(单重)摄动算法相比,双重摄动算法既提高了格式精度又明显扩大了格式的稳定域范围.利用双重摄动算法,即分别利用上游和下游基点变量的摄动重构将高阶流体力学关系及迎风机制耦合进二阶中心格式之中,由此构建了对流扩散方程的对网格Reynolds数的任意值均稳定(绝对稳定)高精度(四阶和八阶精度)三基点中心TVD差分格式,通过解析分析以及3个算例计算证实了构建格式的优良性能;3个算例包括一维线性、非线性(Burgers方程)和二维变系数对流扩散方程.数值计算表明:构建的格式在粗网格下不振荡,构建格式在粗网格时的最大误差L_∞和均方误差L_2与二阶中心格式在细网格时的相应误差一致,对线性方程,构建格式在细网格下可达到L_2精度阶.     

浅水波方程的高精度隐式WCNS格式

设计了高精度隐式WCNS格式,用于数值求解浅水波方程。方程通量导数采用四阶隐式紧致差分格式计算;半节点通量采用五阶非线性加权插值方法计算。对于含源项浅水波方程,采用特殊的源项处理,使得隐式WCNS格式具有和谐性,即在静水条件下保持流速为零,水位为常数。通过线性算例及几个经典的无源项和含源项数值算例对WCNS格式进行测试,结果表明:该格式在光滑区具有四阶精度,在间断处具有良好的捕捉激波能力,同时对于含源项问题具有保持静水条件下定常解的和谐性。     

二维泊松方程的两步预估校正格式

为避免用四阶紧致格式求解泊松方程所具有编程复杂和难以实现的困难,对传统的五点二阶中心差分格式进行改进;通过增加对残差的校正计算,提出了一种新型具有四阶精度的两步预估校正格式.新格式虽需要增加一定的计算量,但它的格式精度高,边界条件处理极简单,易于编程实现.通过数值实验,结果证明上述格式的确具有易于编程和计算精度高的优点.预估校正格式很容易推广到其他复杂情形.     

尺度无关高阶WCNS格式

高速流场的数值模拟中, 既要保证对小尺度结构的高保真分辨, 又要实现对激波稳定、无振荡地捕捉.当前工程中广泛应用的高精度数值格式虽然都能一定程度地满足上述两种要求, 但仍与理想目标存在较大差距.例如, 模拟雷诺应力模型等小尺度问题时, 高精度格式在间断解附近易产生数值振荡.基于高精度格式所存在的上述问题, 本文引入去尺度函数, 探索了一种更加简单稳定的非线性权重构造方法, 并将其应用于7阶精度加权紧致非线性格式WCNS, 提出了一种尺度无关的7阶WCNS格式.该格式的性能与灵敏度参数和尺度因子的选择无关, 并且在小尺度下仍可以有效捕捉流场激波.同时, 该格式在间断处具有基本无振荡性质, 且在任意尺度函数下保持尺度无关, 并且在极值点处也能保持最优精度.本文还推导了7阶D权函数的形式.最后, 在一维线性对流方程中验证了新格式在流场光滑区能够达到设计精度, 并通过一系列数值实验证明了尺度无关的7阶WCNS格式在激波捕捉能力上具有良好表现, 为WCNS格式改进和解决可压缩湍流等非线性问题提供了一种新途径.      

二维对流扩散方程的欧拉—拉格朗日分裂格式

本文在[1]基础上发展了一种有效的处理大P_e(R_e)数、非定常二维对流扩散方程的欧拉-拉格朗日(E-L)分裂格式,由于方法本质上与区域形状无关,且不需再分网格,因此是一种无网格的E-L方法,特别对于定常流动,E.-L.分裂格式可以导致比一阶迎风格式更精确的单调、无振荡格式,文中对于常系数、变系数和非线性的二维非定常和定常对流扩散方程的(初)边值问题进行了数值计算,数值结果与精确解的比较表明,本方法具有很好的精度,解是单调无振荡的,比通常一阶迎风格式具有较少的数值扩散,最大计算网格P-e(R-e)数可达100—500。     

一种基于微分求积的空间分数阶扩散方程求解方法

通过微分求积建立求解变系数空间分数阶扩散方程的一种有效直接数值方法。基于Reciprocal Multiquadric和Thin-Plate Spline径向基函数推导两种逼近分数阶导数的微分求积公式，将所考虑的模型问题转化成易求解的常微分方程组，并采用Crank-Nicolson格式进行离散。给出5个数值算例，计算结果表明，只要径向基函数的形状参数选择恰当，本文方法在精度和效率上均优于一些现有算法。     

Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD

Based on the successive iteration in the Taylor series expansion method,a three-point explicit compact difference scheme with arbitrary order of accuracy is derived in this paper.Numerical characteristics of the scheme are studied by the Fourier analysis. Unlike the conventional compact difference schemes which need to solve the equation to obtain the unknown derivatives in each node,the proposed scheme is explicit and can achieve arbitrary order of accuracy in space.Application examples for the convection- diffusion problem with a sharp front gradient and the typical lid-driven cavity flow are given.It is found that the proposed compact scheme is not only simple to implement and economical to use,but also is effective to simulate the convection-dominated problem and obtain high-order accurate solution in coarse grid systems.     

Fhree-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD

Based on the successive iteration in the Taylor series expansion method, a three-point explicit compact difference scheme with arbitrary order of accuracy is derived in this paper. Numerical characteristics of the scheme are studied by the Fourier analysisl Unlike the conventional compact difference schemes which need to solve the equation to obtain the unknown derivatives in each node, the proposed scheme is explicit and can achieve arbitrary order of accuracy in space. Application examples for the convectiondiffusion problem with a sharp front gradient and the typical lid-driven cavity flow are given. It is found that the proposed compact scheme is not only simple to implement and economical to use, but also is effective to simulate the convection-dominated problem and obtain high-order accurate solution in coarse grid systems.     

污染扩散方程高精度紧致格式及其稳定性分析

针对污染扩散方程提出了时间任意阶精度的显式格式,并对该格式的稳定性和精度进行了分析,理论结果表明:一阶精度的计算格式是传统的显格式,其稳定条件为:s≤1/2(s=D.Δt/Δx2,D为扩散系数,Δt为时间步长,Δx为空间步长),随着保留精度阶数的增加,稳定性范围也会随之增大;当保留无穷阶精度时,格式是无条件稳定的。这也就从一个侧面揭示了稳定性与时间精度之间的关系,为高性能数值计算格式的构思提供了可以借鉴的原则。数值算例的结果表明,本文格式具有一定的实用性。     

Comments on Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD

The explicit compact difference scheme,proposed in Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD by Lin et al.,published in Applied Mathematics and Mechanics (English Edition),2007,28(7),943-953,has the same performance as the conventional finite difference schemes.It is just another expression of the conventional finite difference schemes. The proposed expression does not have the advantages of a compact difference scheme. Nonetheless,we can more easily obtain and implement compared with the conventional expression in which the coefficients can only be obtained by solving equations,especially for higher accurate schemes.     

Development of a class of multiple time‐stepping schemes for convection–diffusion equations in two dimensions

In this paper we present a class of semi‐discretization finite difference schemes for solving the transient convection–diffusion equation in two dimensions. The distinct feature of these scheme developments is to transform the unsteady convection–diffusion (CD) equation to the inhomogeneous steady convection–diffusion‐reaction (CDR) equation after using different time‐stepping schemes for the time derivative term. For the sake of saving memory, the alternating direction implicit scheme of Peaceman and Rachford is employed so that all calculations can be carried out within the one‐dimensional framework. For the sake of increasing accuracy, the exact solution for the one‐dimensional CDR equation is employed in the development of each scheme. Therefore, the numerical error is attributed primarily to the temporal approximation for the one‐dimensional problem. Development of the proposed time‐stepping schemes is rooted in the Taylor series expansion. All higher‐order time derivatives are replaced with spatial derivatives through use of the model differential equation under investigation. Spatial derivatives with orders higher than two are not taken into account for retaining the linear production term in the convection–diffusion‐reaction differential system. The proposed schemes with second, third and fourth temporal accuracy orders have been theoretically explored by conducting Fourier and dispersion analyses and numerically validated by solving three test problems with analytic solutions. Copyright © 2006 John Wiley & Sons, Ltd.     

Comments on <Emphasis Type="Italic">Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD</Emphasis>

The explicit compact difference scheme, proposed in Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD by Lin et al., published in Applied Mathematics and Mechanics （English Edition）, 2007, 28（7）, 943-953, has the same performance as the conventional finite difference schemes. It is just another expression of the conventional finite difference schemes. The proposed expression does not have the advantages of a compact difference scheme. Nonetheless, we can more easily obtain and implement compared with the conventional expression in which the coefficients can only be obtained by solving equations, especially for higher accurate schemes.     

Development of level set method with good area preservation to predict interface in two‐phase flows

A two‐step conservative level set method is proposed in this study to simulate the gas/water two‐phase flow. For the sake of accuracy, the spatial derivative terms in the equations of motion for an incompressible fluid flow are approximated by the coupled compact scheme. For accurately predicting the modified level set function, the dispersion‐relation‐preserving advection scheme is developed to preserve the theoretical dispersion relation for the first‐order derivative terms shown in the pure advection equation cast in conservative form. For the purpose of retaining its long‐time accurate Casimir functionals and Hamiltonian in the transport equation for the level set function, the time derivative term is discretized by the sixth‐order accurate symplectic Runge–Kutta scheme. To resolve contact discontinuity oscillations near interface, nonlinear compression flux term and artificial damping term are properly added to the second‐step equation of the modified level set method. For the verification of the proposed dispersion‐relation‐preserving scheme applied in non‐staggered grids for solving the incompressible flow equations, three benchmark problems have been chosen in this study. The conservative level set method with area‐preserving property proposed for capturing the interface in incompressible fluid flows is also verified by solving the dam‐break, Rayleigh–Taylor instability, bubble rising in water, and droplet falling in water problems. Good agreements with the referenced solutions are demonstrated in all the investigated problems. Copyright © 2010 John Wiley & Sons, Ltd.     

A generalised finite difference scheme based on compact integrated radial basis function for flow in heterogeneous soils

In the present paper, we develop a generalised finite difference approach based on compact integrated radial basis function (CIRBF) stencils for solving highly nonlinear Richards equation governing fluid movement in heterogeneous soils. The proposed CIRBF scheme enjoys a high level of accuracy and a fast convergence rate with grid refinement owing to the combination of the integrated RBF approximation and compact approximation where the spatial derivatives are discretised in terms of the information of neighbouring nodes in a stencil. The CIRBF method is first verified through the solution of ordinary differential equations, 2–D Poisson equations and a Taylor‐Green vortex. Numerical comparisons show that the CIRBF method outperforms some other methods in the literature. The CIRBF method in conjunction with a rational function transformation method and an adaptive time‐stepping scheme is then applied to simulate 1–D and 2–D soil infiltrations effectively. The proposed solutions are more accurate and converge faster than those of the finite different method used with a second‐order central difference scheme. Additionally, the present scheme also takes less time to achieve target accuracy in comparison with the 1D‐IRBF and higher order compact schemes.     

A hybrid Padé ADI scheme of higher‐order for convection–diffusion problems

A high‐order Padé alternating direction implicit (ADI) scheme is proposed for solving unsteady convection–diffusion problems. The scheme employs standard high‐order Padé approximations for spatial first and second derivatives in the convection‐diffusion equation. Linear multistep (LM) methods combined with the approximate factorization introduced by Beam and Warming (J. Comput. Phys. 1976; 22 : 87–110) are applied for the time integration. The approximate factorization imposes a second‐order temporal accuracy limitation on the ADI scheme independent of the accuracy of the LM method chosen for the time integration. To achieve a higher‐order temporal accuracy, we introduce a correction term that reduces the splitting error. The resulting scheme is carried out by repeatedly solving a series of pentadiagonal linear systems producing a computationally cost effective solver. The effects of the approximate factorization and the correction term on the stability of the scheme are examined. A modified wave number analysis is performed to examine the dispersive and dissipative properties of the scheme. In contrast to the HOC‐based schemes in which the phase and amplitude characteristics of a solution are altered by the variation of cell Reynolds number, the present scheme retains the characteristics of the modified wave numbers for spatial derivatives regardless of the magnitude of cell Reynolds number. The superiority of the proposed scheme compared with other high‐order ADI schemes for solving unsteady convection‐diffusion problems is discussed. A comparison of different time discretizations based on LM methods is given. Copyright © 2009 John Wiley & Sons, Ltd.     

A new NND difference scheme of second-order in time and space

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅＬａｘ＿ＷｅｎｄｒｏｆｆｓｃｈｅｍｅａｎｄＭａｃＣｏｒｍａｃｋｓｃｈｅｍｅａｒｅｔｗｏｗｅｌｌ＿ｋｎｏｗｎｄｉｆｆｅｒｅｎｃｅｓｃｈｅｍｅｓｗｈｉｃｈａｒｅｕｔｉｌｉｚｅｄｉｎｎｕｍｅｒｉｃａｌｓｉｍｕｌａｔｉｏｎｏｆｔｈｅｆｌｕｉｄｆｌｏｗｓｇｏｖｅｒｎｅｄｂｙＥｕｌｅｒｏｒＮａｖｉｅｒ＿Ｓｔｏｋｅｓｅｑｕａｔｉｏｎｓ.Ｔｈｅｌｉｍｉｔａｔｉｏｎｏｆｔｈｅｓｅｔｗｏｓｃｈｅｍｅｓａｒｅ:ｗｈｅｎｔｈｅｆｌｏｗｆｉｅｌｄｃｏｎｔａｉｎｓｓｈｏｃｋｓ,ｔｈｅｒｅｗｉｌｌ…