Effects of injection beam parameters and foil scattering for CSNS/RCS

The China Spallation Neutron Source (CSNS) uses H- stripping and phase space painting method to fill a large ring acceptance with a small emittance linac beam. The dependence of the painting beam on the injection beam parameters was studied for the Rapid Cycling Synchrotron (RCS). The simulation study was done for injection with different momentum spreads, different rms emittances of the injection beam, and different matching conditions. Then, the beam loss, 99% and rms emittances were obtained, and the optimized injection beam parameters were given. The interaction between H- beam and stripping foil was studied, and the effect of foil scattering was simulated. The stripping efficiency was calculated and the suitable thickness of stripping foil was obtained. In addition, the energy deposition on the foil and the beam loss due to the foil scattering were also studied.     

Monte Carlo simulation of electron beam air plasma characteristics

A high-energy electron beam generator is used to generate a plasma in atmosphere. Based on a Monte Carlo toolkit named GEANT4, a model including complete physics processes is established to simulate the passage of the electron beam in air. Based on the model, the characteristics of the electron beam air plasma are calculated. The energy distribution of beam electrons (BEs) indicates that high-energy electrons almost reside in the centre region of the beam, but low-energy electrons always live in the fringe area. The energy deposition is calculated in two cases, i.e., with and without secondary electrons (SEs). Analysis indicates that the energy deposition of SEs accounts for a large part of the total energy deposition. The results of the energy spectrum show that the electrons in the inlet layer of the low-pressure chamber (LPC) are monoenergetic, but the energy spectrum of the electrons in the outlet layer is not pure. The SEs are largely generated at the outlet of the LPC. Moreover, both the energy distribution of BEs and the magnitude of the density of SEs are closely related to the pressure of LPC. Thus, a conclusion is drawn that a low magnitude of LPC pressure is helpful for reducing the energy loss in the LPC and also useful for greatly increasing the secondary electron density in dense air.     

低能强流质子束空间电荷补偿度研究(英文)

对于低能强流离子束来说,空间电荷效应的存在将导致束流发散、发射度增加等一系列问题,从而降低束流品质。幸运的是,当束流由离子源引出通过低能传输线时会与其中的剩余气体发生电离反应,产生二次电子与二次离子;二次电子在束流自身产生的电场作用下,在束流中积累并中和部分空间电荷,达到抑制空间电荷效应的效果。为了测量空间电荷中和程度,中国科学院近代物理研究所研制了一台三栅网式能量分析仪用以测量电离过程中产生的二次离子能量来间接计算空间电荷中和度。实验结果表明,对于40 keV, 18.5 mA的质子束,真空度为1.510*3 Pa 时得到最佳补偿度;真空度一定的情况下,空间电荷补偿度随束流流强增加而变大。For high-intensity low-energy ion beams, space charge effect is a main cause of beam divergence  and emittance growth. Fortunately, residual gas molecules in the drift space tend to be ionized and neutralize the beam space charge spontaneously. The level of Space Charge Neutralization (SCN)is measured through the detection of created secondary ion energy distribution in the beam region. A so-called non-interceptive Three-grid Energy Analyzer (TEA) has been designed and manufactured at Institute of Modern Physics, Chinese Academy of Sciences (IMP). This paper will present the detailsof the TEA detector and the application to diagnose proton beam SCN level in the Low Energy Beam Transport (LEBT) line. As a preliminary result, for an 18.5 mA proton beam a best compensating point appears at the vacuum pressure of 1.510*3 Pa. And the neutralization level is advanced with thegrowth of beam current in a constant vacuum pressure.     

康普顿背散射技术对贮存环电子束诊断及其应用——I电子束能量的精确测量及光学标准实验站

简单叙述了采用康普顿背散射技术精确测量电子束能量的技术,并指出建立辐射标准实验站对精确电子束能量测量的需求. The technique to measure the electron beam energy accurately with Compton backscattering technique is introduced and requirements for the experimental stations of radiometry are also described in the paper.     

康普顿背散射技术对贮存环电子束诊断及其应用——I电子束能量的精确测量及光学标准实验站

简单叙述了采用康普顿背散射技术精确测量电子束能量的技术,并指出建立辐射标准实验站对精确电子束能量测量的需求. The technique to measure the electron beam energy accurately with Compton backscattering technique is introduced and requirements for the experimental stations of radiometry are also described in the paper.     

ADS注入器II的5 MeV高能传输线的设计与搭建

ADS先导专项的注入器Ⅱ计划在将质子束通过一个Cryomodule加速到5 MeV后,进行10 mA连续束流的调试,以验证ADS低能段的强流超导直线加速器技术。为了将50 kW的束流功率沉积到束流垃圾站,需要搭建一条高能束流传输线,从超导段开始传输束流。采用两套三组合四极透镜控制束流包络及垃圾站的束流尺寸,利用诊断真空室进行水平和垂直发射度的测量。为避免束流产生的真空管道损伤,该传输线必须确保束流无损失地传输到垃圾站。A CW 10 mA,5 MeV beam commissioning of CADS Injector Ⅱ is planed recently to test the high power superconduction linac techniques.To transport 50 kW beam from linac to the beam dump,a high energy beam line (HEBT) line is designed and setup.Two Triplet are used to control the beam size along HEBT and at the beam dump.One diagnostics box is used for horizontal and vertical emittance measurement.To avoid damages to the vacuum pipe,beam should be transported to the beam dump without losses.The details of the HEBT design will be described in the paper.     

Measurement of anomalous nuclear reaction in deuterium-loaded metal

This paper reports on an experiment for testing natural nuclear fusion at low temperature searching for evidence of the origin of ³He from natural nuclear fusion in deep Earth. The experiment was carried out using deuterium-loaded titanium foil samples and powder sample. Detection of charged particle was carried out using a low-level charged particle spectrometer. An Al foil was used as an energy absorber for identification of charged particle. Although the counting rate is very low in the experiment, the emission of energetic particle from the sample is observed and the particle is identified as a proton having energy about 2.8 MeV after exiting the titanium sample. This work provides a positive result for the emission of charged particle in the deuterium-loaded titanium foil samples at low temperature, but a negative result for the deuterium-loaded titanium powder sample. The average reaction yield is deduced to be (0.46±0.08) protons/h for the foil samples. With the suggestion that the proton originates from d--d reaction, we calculate the reaction rate for d--d reaction, and the obtained result is 1.4× 10^-24 fusion/d--d\cdot sec. The negative result of the deuterium-loaded titanium powder sample suggests that the reaction yield might be correlated with the density or microscopic variables of deuterium-loaded titanium materials. The negative result also indicates that d--d reaction catalysed by μ-meson from cosmic ray can be excluded in the samples in this experiment.     

HIRFL-CSR电子冷却束流位置测量系统

高效率的电子冷却过程, 要求电子束与离子束位置平行且重叠。 为了同时测量电子束与离子束的位置, 在HIRFL CSR电子冷却装置上研发了以容性圆筒形极板为感应电极的束流位置探测系统。 系统测量束流通过探针时产生的脉冲感应信号, 并进行傅里叶变换得到频谱信号, 分析4个不同电极上频谱信号强度获取束流的位置信息。 测量结果表明, 该束流位置探测系统测量准确, 为定量研究储存环离子累积和电子冷却过程与两种束流相对位置及角度的依赖关系提供了条件。 The efficient electron cooling requires that the ion beam and electron beam are parallel and overlapped. In order to measure the positions of ion beam and electron beam simultaneously, a beam position monitor system is developed for the HIRFL-CSR electron cooler device, which probe consists of four capacitive cylinder linear cut poles. One can get the both beam positions from the picking up signals of four poles by using Fourier transform(FFT) method. The measurement results show that the beam position monitor system is accurate. This system is suitable for investigating the relation between electron cooling processing and the angle of ion beam and electron beam.     

Sheet Plasma Produced by Hollow Cathode Discharge

A sheet plasma is produced by a hollow cathode discharge under an axial magnetic field. The plasma is about40cm in length, 4cm in width and 1 cm in thickness. The electron density is about 10^8cm^-3. The hollow cathodeis made to be shallow with a large opening, which is different from the ordinary deep hollow cathode. A Langmuirprobe is used to detect the plasma. The electron density and the spatial distribution of the plasma change whenvoltage, pressure and the magnetic field vary. A peak and a data fluctuation at about 200 G-300 G are observedin the variation of electron density (or thickness of the sheet plasma) with the magnetic field. Our work will behelpful in characterizing the sheet plasma and will make the production of dense sheet plasma more controllable.     

Spatial distribution of electron characteristic in argon rf glow discharges

The spatial distributions of the electron density and the mean electron energy of argon radio frequency (rf) glow discharge plasma in a plasma-enhanced chemical vapour deposition (PECVD) system have been investigated using an established movable Langmuir probe. The results indicate that in the axial direction the electron density tends to peak at midway between the two electrodes while the axial variation trend of mean electron energy is different from that of the electron density, the mean electron energy is high near the electrodes. And the mean electron energy near the cathode is much higher than that near the anode. This article focuses on the radial distribution of electron density and mean electron energy. A proposed theoretical model distribution agrees well with the experimental one: the electron density and the mean electron energy both increase from the centre of the glow to the edge of electrodes. This is useful for better understanding the discharge mechanism and searching for a better deposition condition to improve thin film quality.     

Application of aluminum and titanium foils in low-energy wide-aperture electron accelerators

We have reported on the results of theoretical and experimental investigations of characteristics of aluminum and titanium foils used in devices to extract electron beams from wide-aperture low-energy accelerators with a high current density. The mechanical properties of foils at different temperatures and the electron beam transmission and absorption coefficients have been compared. The results of analyzing the dependences of the efficiency of the electron beam extraction from accelerators on the type of the electron–optical system, material, and thickness of the foil for various sizes of extraction windows and the same type of the slot support grids have been presented. We have proposed an analytic model for calculating the temperature of the foil in the unit cell of the support grid. The electron transmittance and absorbance, as well as the temperature regimes of the foils, have been calculated using different methods.     

Study of defect evolution by TEM with in situ ion irradiation and coordinated modeling

The paper describes a novel transmission electron microscopy (TEM) experiment with in situ ion irradiation designed to improve and validate a computer model. TEM thin foils of molybdenum were irradiated in situ by 1?MeV Kr ions up to ～0.045 displacements per atom (dpa) at 80°C at three dose rates ?5?×?10^?6, 5?×?10^?5, and 5?×?10^?4?dpa/s – at the Argonne IVEM-Tandem Facility. The low-dose experiments produced visible defect structure in dislocation loops, allowing accurate, quantitative measurements of defect number density and size distribution. Weak beam dark-field plane-view images were used to obtain defect density and size distribution as functions of foil thickness, dose, and dose rate. Diffraction contrast electron tomography was performed to image defect clusters through the foil thickness and measure their depth distribution. A spatially dependent cluster dynamic model was developed explicitly to model the damage by 1?MeV Kr ion irradiation in an Mo thin foil with temporal and spatial dependence of defect distribution. The set of quantitative data of visible defects was used to improve and validate the computer model. It was shown that the thin foil thickness is an important variable in determining the defect distribution. This additional spatial dimension allowed direct comparison between the model and experiments of defect structures. The defect loss to the surfaces in an irradiated thin foil was modeled successfully. TEM with in situ ion irradiation of Mo thin foils was also explicitly designed to compare with neutron irradiation data of the identical material that will be used to validate the model developed for thin foils.     

强流脉冲电子束作用下钽金属靶膨胀的轴向约束

研究了强流脉冲电子束与钽金属靶相互作用后靶材流体动力学膨胀的轴向约束问题。由于电子束在金属钛和钽内的能量沉积存在差异,未完全气化的钛箔对气化膨胀的钽材能够起到约束作用,并且可以通过吸收钽的能量来降低钽的膨胀速度。通过分析比较电子束在靶上形成孔洞的形貌以及高速相机拍摄得到的不同时刻靶材喷射的图像,证实了钛箔能够对钽金属靶的轴向膨胀起到一定的约束作用。尤其是电子束打靶过后1μs内的初始阶段,约束效果比较明显。     

CSRm内靶实验中的轻离子束流寿命模拟研究

 建立了内靶对兰州冷却储存环主环束流影响的单粒子跟踪模拟程序,对pellet小丸靶和碳靶对束流带来的负面影响进行了模拟研究,主要讨论CSRm内靶实验中的束流存活率和束流寿命状态。结果显示利用厚度为1×10¹⁶ atoms×cm^-2小丸内靶时,2.6 GeV质子束流寿命在100 s量级,而对于目前技术水平下的碳膜靶 (厚度为 5×10¹⁷ atoms×cm^-2),质子束流寿命为s量级;束流寿命和束流能量基本成正比关系,束流寿命和内靶厚度近似成反比关系。     

Behavior of prebreakdown emission centers with 200-kv 100-ns pulses applied to a vacuum gap

Using an electron-transparent anode (titanium foil), the behavior of prebreakdown emission centers on a cathode made of 12X18H10T stainless steel is studied for the case of vacuum gap excitation by 100-ns-wide voltage pulses with an amplitude of 200 kV. To raise the working electric field to 1 MV/cm or higher, the electrodes are preprocessed by a low-energy high-current electron beam in the surface melting mode. It is found that prebreakdown emission centers may be stable and unstable. The stable ones arise at an electric field strength of 0.4?C0.6 MV/cm, and their activity grows with voltage up to breakdown. As the electric field increases, new unstable emission centers occur at sites other than those observed at the previous voltage pulse. Reasons for the appearance of unstable emission centers are discussed.     

Backscattering of Relativistic Electrons Incident on a Planar Foil at a Small Angle to Its Surface

Photographs of cross sections of an electron beam backscattered from a thin tungsten target have been obtained on a dosimetric film. The procession of images makes it possible to obtain the spatial distribution of backscattered particles. The angles of back reflection θ_br of electron beams from foils have been measured. A 7.4-MeV microtron has been used as a source of electrons. The experiments have been performed with a tungsten foil 386 mg/cm² (200 μm) thick and a tantalum foil 1328 mg/cm² (800 μm) thick. Particles have been injected at an angle of α = 10° to the foil surface. The Monte Carlo simulation of the scattering of relativistic electrons incident on a planar target at small angles to its surface has been performed. The spatial and energy distributions of backscattered particle fluxes both transmitted through the target and reflected from it have been calculated. The dependences of fluxes on the direction of injection of particles and on the material and thickness of the target have been considered.     

Koinzidenzexperimente zum Elementarprozeß der Bremsstrahlungserzeugung

By using a coincidence method, the angular distribution of bremsstrahlung has been measured for definite energy loss and definite angle of the outgoing electron. The incident electron energy was 300 keV. With a magnetic spectrometer, outgoing electrons with an energy of 170 keV and scattering angles of 0°, 5° and 10° were selected. The electrons and photons were both detected in scintillation counters. A gold foil of 250 Å thickness served as the target. The experimental results are compared with theoretical calculations.     

电子束与烟气相互作用机制模拟分析

 电子束在烟气中穿透深度和剂量分布将直接影响废气中硫、氮氧化物的脱除效率。通过理论计算和蒙特卡罗模拟计算得到不同能量电子穿过各种厚度加速器箔窗后能量损失情况；对不同入射能量电子束在烟气中透射深度和轨迹分布进行了模拟计算。结果表明：电子束反应最佳能量为700 keV；利用产生1 m长线状束流的电子加速器进行双面照射，烟道反应室横截面最佳尺寸为1.0 m×3.5 m。     

光学渡越辐射理论及其在直线感应加速器脉冲电子束诊断中的应用

匀速运动的带电粒子在穿过具有不同介电常数的两种媒质界面时要产生所谓光学渡越辐射。该辐射在粒子的入射平面上呈偏振行为;从辐射强度的角分布可以确定入射粒子的能量。在入射到双膜系统的情况下,由于干涉的发生,在第二膜前表面的强度角分布有振荡行为。利用这些现象,可对脉冲电子束包络半径、束电流密度的横向分布,束能量以及横向散角进行测量,依照这一原理在各LIA加速器上进行的脉冲电子束参数测量,获得的有效数据极大地提高了加速器的调试效率。     

Study of Intense Electron Beams Produced by High-Voltage Pulsed Glow Discharges

We report the generation of high-current-density (20 A/cm2) pulsed electron beams from high-voltage (48-100 kV) glow discharges using cathodes 7.5 cm in diameter. The pulse duration was determined by the energy of the pulse generator and varied between 0.2 ?s and several microseconds, depending on the discharge current. The largest electron beam current (900 A) was obtained with an oxidized aluminum cathode in a helium-oxygen atmosphere. An oxidized magnesium cathode produced similar results, and a molybdenum cathode operated at considerably lower currents. A small-diameter (<1 mm) well-collimated beam of energetic electrons of very high current density (>1 kA/cm2) was also observed to develop in the center of the discharge. Electrostatic probe measurements show that the negative glow plasma density and the electron beam current have a similar spatial distribution. Electron temperatures of 1-1.5 eV were measured at 7 cm from the cathode. The plasma density (8.5 · 1011 cm-3 at 450 A) was found to depend linearly on the discharge current. In discharges at high currents a denser and higher temperature plasma region was observed to develop at approximately 20 cm from the cathode. We have modeled the process of electron beam generation and predicted the energy distribution of the electron beam. More than 95 percent of the electron beam energy is calculated to be within 10 percent of that corresponding to the discharge voltage.