溶胶-凝胶法制备Li-N双掺p型ZnO薄膜的结构、光学和电学性能

采用溶胶-凝胶法在n型Si(100)衬底上沉积Li-N双掺杂ZnO薄膜,经X射线衍射和扫描电镜图片分析,所制备薄膜具有多晶纤锌矿结构和高的c轴择优取向.室温下霍尔效应测试结果显示Li-N双掺杂ZnO薄膜具有p型导电特性.在Li掺杂量为15.0at%,Li/N（摩尔比）为1∶1,700℃退火等优化条件下得到的最佳电学性能结果是：电阻率为0.34 Ω·cm,霍尔迁移率为16.43 cm²/V·s,载流子浓度为2.79×10¹⁹ cm^{-3关键词： Li-N双掺 p型ZnO薄膜 溶胶-凝胶 性能}     

水热法制备Co掺杂ZnO纳米棒及其光学性能

采用水热法在石英衬底上以Zn(CH3COO)2.2H2O和Co(NO3)2.6H2O水溶液为源溶液,以C6H12N4(HMT)溶液作为催化剂,在较低温度下制备了Co掺杂的ZnO纳米棒。采用X射线衍射(XRD)和扫描电子显微镜(SEM)对所生长ZnO纳米棒的晶体结构和表面形貌进行了表征,考察了Co掺杂对ZnO纳米棒微观结构和对发光性能影响的机制。结果表明:Co掺杂的ZnO纳米棒呈六方纤锌矿结构,具有沿(002)面择优生长特性,Co掺杂使ZnO纳米棒的直径变细;同时室温光致发光(PL)谱检测显示Co掺杂ZnO纳米棒具有很强的近带边紫外发光峰,而与深能级相关的缺陷发光峰则很弱。本研究采用水热法在石英衬底上于较低温度下生长出了具有较高光学质量的Co掺杂ZnO纳米棒。     

采用PVA方法制备ZnO基发光稀磁半导体

不同的制备工艺对ZnO薄膜的微结构和性能有很大的影响,为了得到成本较低,样品具有较好特性的实验方法,对于制备手段进行了探索。使用PVA溶胶-凝胶法制备了Zn_0.88Co_0.12O薄膜,研究了不同退火工艺对其微结构的影响。对于Zn_0.88Co_0.12O样品的微结构和室温下的铁磁性和发光特性,具体比较分析了产生原因。对比了Co掺杂和复合Co、Fe掺杂Zn_0.88(Co_0.5Fe_0.5)_0.12O样品的微结构,采用振动样品磁强计(VSM)测量了样品的磁特性,发现单一掺杂的薄膜具有更好的晶体质量和更强的磁性。     

氧空位对钴掺杂氧化锌半导体磁性能的影响

从实验和理论上阐述了氧空位对Co掺杂ZnO半导体磁性能的影响.采用磁控溅射法在不同的氧分压下制备了Zn_095Co_005O薄膜,研究了氧分压对薄膜磁性能的影响.实验结果表明,高真空条件下制备的Zn_095Co_005O薄膜具有室温铁磁性,提高氧分压后制备的薄膜铁磁性逐渐消失.第一性原理计算表明,在Co掺杂ZnO体系中引入氧空位有利于降低铁磁态的能量,铁磁态的稳定性与氧空位和Co之间的距离密切相关. 关键词： Co掺杂ZnO 稀磁半导体 第一性原理计算 氧空位缺陷     

Co掺杂ZnO薄膜的结构和磁学性能

研究了用单束脉冲激光沉积法制备的Co掺杂ZnO薄膜的结构和磁学性能。XRD表征结果表明制备的薄膜是具有沿c轴择优取向的纤锌矿点阵结构。然而,进一步的高分辨电子显微镜结果显示整个样品上的晶体取向并不完全相同。很难说明形成了单晶。结果分析表明Co占据了部分Zn的格点,并对电子结构产生了影响。室温下观察到了磁滞回线,显示掺杂Co可以实现ZnO的磁性翻转,但磁性比较小。该薄膜与我们以前用双束脉冲激光沉积法制备的Co掺杂ZnO薄膜具有相似的性能,提示我们其内部的机制可能相似。     

Co与Cu掺杂ZnO薄膜的制备与光致发光研究

采用溶胶-凝胶旋涂法在玻璃衬底上制备了Co, Cu单掺杂及Co,Cu共掺杂ZnO薄膜.用金相显微镜观察了Co与Cu掺杂对ZnO薄膜形貌的影响.X射线衍射（XRD）研究揭示所有ZnO薄膜样品都存在（002）择优取向,在Cu单掺的ZnO薄膜中晶粒尺寸最大.对所有样品的室温光致发光测量都观察到较强的蓝光双峰发射和较弱的绿光发射,其中长波长的蓝光峰和绿光峰都能够通过掺杂进行控制.对不同掺杂源的ZnO薄膜发光性能进行了分析,认为蓝光峰来源于电子由导带底到锌空位能级的跃迁及锌填隙到价带顶的跃迁,绿光峰是由于掺杂造成的 关键词： ZnO薄膜 溶胶-凝胶 Co Cu掺杂 光致发光     

Co,Sn共掺ZnO薄膜结构与光致发光的研究

采用溶胶-凝胶旋涂法在玻璃衬底上制备了Co,Sn掺杂ZnO系列薄膜.通过金相显微镜和X射线衍射(XRD)研究了Co与Sn掺杂对薄膜的表面形貌和微结构的影响.XRD结果表明,所有ZnO薄膜样品都存在(002)择优取向,特别Sn单掺ZnO薄膜的c轴择优取向最为显著,而且晶粒尺寸最大.XPS测试表明样品中Co和Sn的价态分别为2+和4+,证实Co²⁺,Sn⁴⁺进入了ZnO的晶格.室温光致发光谱(PL)显示在所有的样品中都有较强的蓝光双峰发射和较弱的绿光发 关键词： ZnO薄膜 溶胶-凝胶 掺杂 光致发光     

退火氛围对掺杂ZnO薄膜磁性的影响

采用直流磁控反应共溅法制备了非磁性元素Al和磁性元素Co掺杂的ZnO薄膜, 样品原位真空退火后再空气退火处理. 利用X射线衍射仪(XRD) 和物理性能测量仪(PPMS) 对薄膜的结构和磁性进行了表征. XRD和PPMS结果表明, 不同的退火氛围对掺杂薄膜的结构和磁性有着很大的影响. 真空退火的Al掺杂ZnO薄膜没有观察到铁磁性, 而空气退火的样品却显示出明显的室温铁磁性, 铁磁性的来源与空气退火后导致Al和ZnO基体间电荷转移增强有关. 而对于Co掺杂ZnO薄膜, 真空退火后再空气退火, 室温铁磁性明显减弱. 其磁性变化与Co离子和ZnO基体间电荷转移导致磁性增强和间隙Co原子被氧化导致磁性减弱有关.     

铟磷共掺杂p型氧化锌薄膜形成机理和性质

利用射频磁控溅射在石英衬底上生长出铟磷共掺氧化锌薄膜(ZnO ∶ In,P),所用靶材为掺杂五氧化二磷(P₂O₅)和氧化铟(In₂O₃)的氧化锌(ZnO)陶瓷靶,掺杂质量分数分别为1.5%和0.3%,溅射气体为Ar和O₂的混合气体。原生ZnO薄膜是绝缘的, 600 ℃退火5 min后导电类型为n型,而800 ℃退火5 min后为p型。p型ZnO薄膜的电阻率、载流子浓度和霍尔迁移率分别为12.4 Ω·cm, 1.6×10¹⁷ cm^-3 和3.29 cm²·V^-1·s^-1。X射线衍射测量结果表明所有样品都只有(002)衍射峰,并与相同条件下生长的未掺杂ZnO相比向大角度方向偏移,意味着In和P都占据Zn位。XPS测试结果表明在共掺ZnO薄膜中P不是取代O而是取代Zn。因此,铟磷共掺ZnO薄膜中,In和P都取代Zn,并且P_Zn与2个锌空位(V_Zn)形成P_Zn-2V_Zn复合受主,薄膜表现为p型。     

离子束增强沉积制备p型氧化锌薄膜及其机理研究

采用离子束增强沉积方法在Si和SiO₂/Si衬底上制备In-N共掺杂ZnO薄膜(INZO)，溅射靶是用ZnO和2 atm% In₂O₃粉体均匀混合并压制而成，在氩离子溅射ZnO靶的同时，氮、氩混合离子束垂直注入沉积的薄膜.实验结果显示INZO薄膜具有(002)的择优取向，并且为p型导电，电阻率最低为0.9Ωcm.薄膜在氮气、氧气气氛下退火，对薄膜的结构和电学特性与成膜和退火条件的关系进行了分析. 关键词： 氧化锌薄膜 p型掺杂 离子束增强沉积     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.