光纤探针型近场光镊光阱力特性研究

基于动量守恒原理,结合麦克斯韦应力张量和三维时域有限差分方法,建立了近场空间内激光光镊对纳米微粒的光阱力计算模型.分析了光纤探针型近场光镊的近场分布以及操作纳米微粒时各轴向光阱力的分布情况,并探讨了光纤探针尖端的捕获尺寸、捕获位置和操作稳定性.结果表明:微粒应处于光纤探针针尖的近场空间内才可实现稳定可靠的纳米操作,不同尺寸的微粒具有不同的捕获效果,且随初始位置的不同微粒的捕获位置亦不同.计算结果为激光近场光镊纳米操作装置的设计和制造提供了理论基础.     

光纤探针型近场光镊光阱力特性研究

基于动量守恒原理,结合麦克斯韦应力张量和三维时域有限差分方法,建立了近场空间内激光光镊对纳米微粒的光阱力计算模型.分析了光纤探针型近场光镊的近场分布以及操作纳米微粒时各轴向光阱力的分布情况,并探讨了光纤探针尖端的捕获尺寸、捕获位置和操作稳定性.结果表明:微粒应处于光纤探针针尖的近场空间内才可实现稳定可靠的纳米操作,不同...     

基于微流控技术的双颗粒体散射函数测量实验研究

本文通过流体力学及COMSOL等仿真软件分析,以PDMS为材料,设计制作了用于捕获两个球形颗粒样品的微流控芯片,并基于光电倍增管(PMT)和电动位移平台,搭建了角度扫描式大动态范围散射光测量装置。该系统可以快速捕获两个球形颗粒,在颗粒捕获后对微流控芯片内沟道与外轮廓进行折射率匹配,持续测量实际捕获颗粒的1°至170°的散射光。对23.75μm、31.10μm、40.01μm三种粒径的聚苯乙烯标准颗粒样品进行了实验研究,并多次重复测量同一粒径双颗粒的散射光分布。基于微流控芯片的双颗粒体散射函数测量方法可以稳定的捕获、释放双颗粒,实验操作简单且具有较好的重复性,在颗粒物体散射函数研究方面具有很大的潜力。     

基于纯相位液晶空间光调制器的全息光学捕获与微操纵

在经典Gerchberg-Saxton(GS)算法的基础上,提出一种改进的快速三维GS算法获取目标场的全息图(CGH)并用于全息光镊系统中,从理论和实验上充分证明了该算法的快速性和有效性。实验搭建了一套基于纯相位液晶空间光调制器(SLM)的全息光镊系统,实现了对酵母菌细胞和二氧化硅小球等微粒的多光阱、多平面三维稳定捕获和动态操纵。实验上还产生了具有强度梯度的线状光阱和光学涡旋光阱,实现了对微粒的运输和旋转操纵。这种可以对微粒实现多光阱、多平面动态三维操纵的全息光镊系统为生物、胶体物理等研究提供了一种新的微操纵工具。     

基于一维声栅共振场的大规模微粒并行排列的实验研究

声操控微粒技术可以非接触无损伤地控制声场中的物体运动,其在精密制造、材料工程、体外诊断等领域具有广阔的应用前景.传统声操控微粒技术一般采用自由声场,如利用单个换能器或阵列换能器产生的聚焦声场、行波场或驻波场等.然而,一般单个换能器产生的声场仅能操控单个微粒;而阵列换能器的驱动系统复杂,导致操控器件成本高昂且难以微型化;因此,亟需研究新的声场形态实现多样性微粒操控.本工作中,采用单个换能器产生的平面波激发一维声栅的共振声场,实验实现了大规模泡沫微球的周期排列操控.其操控机制是由于声栅狭缝中法布里-珀罗谐振声场与声栅表面周期衍射场共振耦合,在声栅表面形成周期分布的局域梯度声场,导致微粒在平行于声栅表面受到声捕获力,在垂直于声栅表面受到指向表面的声吸引力,实现了微粒周期排列在声栅表面上.该工作为利用超声在空气中大规模排列微粒提供了理论基础和技术支持.     

不同偏振态光镊三维光阱刚度的比较研究

为了研究激光偏振态对光阱刚度的影响,本文比较了四种不同偏振态光场(方位角偏振光、径向偏振光、线偏振光、圆偏振光)捕获不同尺寸SiO_2微粒的三维光阱刚度.研究结果表明:当SiO_2微粒的尺寸和激光波长相近时,圆偏振光和线偏振光的三维光阱刚度大于径向偏振光和方位角偏振光的三维光阱刚度;而随着SiO_2微粒尺寸的增加,方位角偏振光和径向偏振光的三维光阱刚度大于圆偏振光和线偏振光的三维光阱刚度.此外,实验也表明:使用浸油物镜捕获微粒时,物镜匹配油的折射率和水的折射率不一致引起的球差,会降低系统对物镜数值孔径的利用.通过这些研究工作,可以为不同偏振态光场的测力研究提供一定的指导和参考.     

一种减小尺寸的声彩虹捕获效应结构*

该文提出了一种减小尺寸的彩虹捕获效应结构,在铁板上刻上深度相同的空气凹槽阵列并加入周期性缝板单元,通过调节缝宽得到不同的等效折射率。该文对1000 Hz～2000 Hz的声波进行仿真实验,仿真结果表明不同频率的声波被局域在不同的位置,即实现了彩虹捕获效应。由于局域处声波群速度很小,局域处声场能量得到很大的提升。相对于传统的深度渐变的空气凹槽结构,我们的结构尺寸更小,可调性更强,更容易实现对低频声波的捕获效应。该结构具有能量加强和声波空间分离的效应,相信在声吸收、声波识别等领域有着潜在的应用前景。     

基于斐波那契波带片的三维光镊

斐波那契波带片(FiZP)在焦平面上有两个不同的主焦点且具有独特的自恢复特性,因此FiZP光束能够在不同平面同时捕获微粒,同时对微粒实现焦平面上的自由移动。仿真分析了FiZP的构成与轴向强度,利用液晶空间光调制器、倒置光学显微镜以及光学元件组合搭建实验平台,对微粒进行三维捕获。实验验证了FiZP光束具有三维光学捕获特性,并可用于构建三维光镊,实现复杂的捕获功能。     

采用能量守恒和高阶Padé近似的三维水声抛物方程模型

为了充分考虑海底地形随三维空间变化的海洋环境中水平方位角耦合效应对声传播的影响,建立了一种三维柱坐标系下流体高阶抛物方程算法。该算法采用泰勒近似将二维方根算子分裂成一维方根算子,并采用分裂步进的高阶Pade近似将一维方根算子写成微分算子有理分式连乘的形式,进而应用Galerkin离散化方法来处理微分算子,最终将微分方程写成矩阵方程的形式;采用能量守恒近似来处理海底边界,以考虑复杂海底对于声传播的影响;采用交替方向隐式格式,实现了三维声场的步进计算。楔形和海底山等典型海域声场仿真计算表明,相比于已有的声场计算模型,三维柱坐标系下高阶抛物方程模型可以更加精确地计算楔形海域和海底山区域的三维声场,实现水平方位全空间声场计算。     

声学微结构的微流控声场的改进与优化*

受限于加工工艺,目前多数的声表面波微流控芯片,主要依靠普通的直通道调节细胞流速,从而控制微球在通道中的排列。但其形成的声场通常无法满足低能量、多功能的微流控需要。本文在普通声表面波微流控芯片的基础上,分别在频域和时域内构建声学微结构,并改变微结构阵列中铜柱间距,模拟仿真了微流控芯片输出端的电势,发现其输出端电压得到了明显的改善。当输入电信号频率在0-30MHz时,输出端电势增加约0.25V;在0-1000ns内,输出端电势增加0.015V左右;进而可以探索开发性价比更高的声波微流控芯片,针对病理检测等所存在的问题进行分析优化,提出新的细胞分离等技术。     

圆环形聚焦声场的构建与调控

提出了一种由径向振动模式的圆环形压电换能器晶片组成的圆柱形阵列换能器结构, 依据阵元激励信号的相位调控机理, 推导了圆环形聚焦声场的调控公式, 在三维空间中构建了圆环形聚焦声场, 实现了对其聚焦区域大小、聚焦圆环半径以及轴向位置移动的调控. 理论分析和仿真研究表明, 所提出的圆柱形阵列换能器实现了对圆环形聚焦声场的调控. 为检测超声、功率超声、医学超声等应用领域提供了一种可实现的新型圆环形可调控聚焦声场.     

基于蜷曲空间结构的近零折射率声聚焦透镜

研究基于蜷曲空间结构的近零折射率声聚焦透镜.根据近零折射率材料的声波方向选择机理,采用蜷曲空间结构为基本单元进行排列,设计具有特定入射与出射界面的几何结构,对透射声波的出射方向进行调控,实现了平面声波与柱面声波的聚焦效应,并深入讨论了透镜内部刚性散射体对声聚焦性能的影响.在此基础上,改变近零折射率透镜的出射界面,可以精确调控声波阵面的形状与方向.该类型透镜具有单一的单元结构、高聚焦性能及高鲁棒性等优点.研究结果为设计新型近零折射率声聚焦透镜提供了理论指导与实验参考,同时也为研究声波阵面的调控提供了新思路.     

圆孔非线性声阻抗三维时域仿真与特性分析

为研究有限振幅声波作用下圆孔的非线性声学特性,提出了基于三维时域计算流体动力学(CFD)仿真的圆孔非线性声阻抗提取方法,通过求解层流方程来模拟声信号在圆孔及上下游的传播,以及采用横向周期性边界条件来考虑高穿孔率时圆孔之间相互作用的影响。研究了不同幅值声波作用下孔径、厚度和穿孔率对声阻抗的影响规律,通过对质点振速幅值、频率和板厚等组成的无量纲参量进行非线性回归分析,得到了圆孔非线性声阻抗的拟合公式,并将其转换为可考虑多频声波影响的时域模型。最后结合声阻抗时域模型和有限差分方法计算了直通穿孔管消声器在小振幅和有限振幅声波作用下的传递损失,通过与实验测量结果的比较,验证了拟合公式的准确性和实用性。     

Cavitation distribution within large phantom vessel and mechanical damage formed on surrounding vessel wall

Blood vessel is one of the most important targets encountered during focused ultrasound (FU) therapy. The lasting high temperature caused by continuous FU can result in structural modification of small vessel. For the vessel with a diameter larger than 2 mm, convective cooling can significantly weaken the thermal effect of FU. Meanwhile, the continued presence of ultrasound will cause repetitive cavitation and acoustic microstreaming, making comprehension of continuous wave induced cavitation effect in large vessels necessary. The Sonoluminescence (SL) method, mechanical damage observation and high-speed camera were used in this study to investigate the combination effect of ultrasound contrast agents (UCAs) and continuous FU in large phantom vessels with a diameter of 10 mm without consideration of thermal effect. When the focus was positioned at the proximal wall, cylindrical hole along the acoustic axis opposite the ultrasound wave propagation direction was observed at the input power equal to or greater than 50 W. When the focus was located at the distal wall, only small tunnels can be found. The place where the cylindrical hole formed was corresponding to where bubbles gathered and emitted brilliant light near the wall. Without UCAs neither such bright SL nor cylindrical hole can be found. However, the UCAs concentration had little influence on the SL distribution and the length of cylindrical hole. The SL intensity near the proximal vessel wall and the length of the cylindrical hole both increased with the input power. It is suggested that these findings need to be considered in the large vessel therapy and UCAs usage.     

Guided waves in a circular duct containing an assembly of circular cylinders

This paper provides an analytical scheme to calculate the admissible acoustic propagation modes of fluid in a circular duct containing an assembly of circular cylinders, as might occur in gas-cooled fast breeder reactors and advanced gas-cooled reactors. The duct wall and cylinders are assumed to be stationary, and their axes are assumed to be parallel to each other. The solution to the acoustic wave equation is expressed in a sum of the partial fluid velocity potentials associated with each rod co-ordinate and duct co-ordinate. The technique of transformation of cylindrical wave functions is then used to solve the boundary value problem. Two kinds of acoustic boundary conditions are considered, acoustically hard and acoustically soft, respectively.     

非结构网格下非定常流场双时间步长的加权ENO-强紧致杂交高分辨率格式

针对三维非定常、可压缩流场的Navier-Stokes方程组,本文提出一种新的双时间步长高精度快速迭代格式。该格式在时间上具有二阶精度,在空间离散上不低于三阶。在对流项与粘性项的处理上,本格式分别采用了加权ENO-强紧致格式与紧致四阶精度格式的思想。几个典型算例的实践表明:计算结果与相关实验数据比较吻合,初步表明了该算法可以在非结构网格下具有高效率与高分辨率的特征。     

谐振管内非线性驻波的有限体积数值算法

为了扩展谐振管内非线性驻波在工程中的应用, 以及克服现有数值计算方法仅局限于求解直圆柱形和指数形谐振管内非线性驻波的问题. 根据变截面的非稳态可压缩热黏性流体Navier-Stokes方程和空间守恒方程, 并基于求解压力速度耦合方程的半隐式算法和交错网格技术, 构建一种能够计算任意形状轴对称谐振管受活塞驱动时内部非线性驻波的有限体积算法. 分别对圆柱形、指数形和圆锥形谐振管内的非线性驻波进行仿真计算. 通过与现有试验结果以及数值仿真结果的对比, 验证了该方法的正确性.并获得除驻波声压之外的另外一些新的物理结果, 包括速度、密度、温度的瞬时变化.在直圆柱形谐振管内产生冲击声压波, 速度波形中出现钉状结构.而在指数形和圆锥形谐振管内产生高声压幅值的驻波, 没有出现冲击波, 速度波形中均未发现钉状结构. 计算结果表明谐振管内非线性驻波的物理属性与谐振管形状之间有密切关系.     

Acoustic elliptical cylindrical cloaks

By making a comparison between the acoustic equations and the 2-dimensional (2D) Maxwell equations, we obtain the material parameter equations (MPE) for acoustic elliptical cylindrical cloaks. Both the theoretical results and the numerical results indicate that an elliptical cylindrical cloak can realize perfect acoustic invisibility when the spatial distributions of mass density and bulk modulus are exactly configured according to the proposed equations. The present work is the meaningful exploration of designing acoustic cloaks that are neither sphere nor circular cylinder in shape, and opens up possibilities for making complex and multiplex acoustic cloaks with simple models such as spheres, circular or elliptic cylinders.     

Size-Dependent Effects in EPR and Luminescence Spectra of NH<Subscript>4</Subscript>BPh<Subscript>4</Subscript> Excited States: from Bulk to Nanoparticles

Photoexcited states of NH₄BPh₄ (TPhBA) particles embedded in mesoporous frameworks of different pore sizes were studied by combined electron paramagnetic resonance (EPR), optical and photoluminescence techniques. A distribution of triplet states with short and long electron–hole distances was found. While EPR studies on TPhBA bulk sample suggested that the formation of electron–hole pairs upon the excitation was caused by electron capture on electron traps, the samples in mesoporous frameworks exhibit two ways of the pair formation. The first one is attributed to the capture on phenyl rings and another one is to be thought as the capture of electrons on adsorbed oxygen molecules. These results are also consistent with the thermoluminescence spectra and EPR studies of the photoexcited samples during annealing.     

Acoustic field excited by a pulsed laser line source in a cylinder

The excitation and propagation of the acoustic waves in an elastic cylinder are studied by laser ultrasonics both theoretically and experimentally. The theoretical analysis of the two-dimensional acoustic field excited by a pulsed laser line source impacting on the generatrix of an elastic cylinder is presented. The dispersive properties for both cylindrical Rayleigh wave and the higher modes--whispering gallery (WG) modes are analyzed in detail. The numerical transient displacement waveforms for a detecting point located another terminal of the cylinder diameter opposite the source are calculated. The experimental excitation and detection of the acoustic waves in an aluminum cylinder are carried out on a laser ultrasonic system, which mainly consists of a Q-switched Nd:YAG laser and a laser interferometer. The wave components of bulk waves and surface waves (cylindrical Rayleigh waves and WG modes) are analyzed by comparing the numerical and experimental waveforms. The results are in good agreement.