Kinetics of electron tunneling transfer in KH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and NH<Subscript>4</Subscript>H<Subscript>2</Subscript>PO<Subscript>4</Subscript> crystals with hydrogen bonds

A model of electron transfer by tunneling between trapped electron and hole centers in crystals with hydrogen bonds under the conditions of thermostimulated mobility of one carrier type in the recombination process has been developed. The proposed model describes all features in the kinetics of induced optical density relaxation observed in nonlinear optical crystals of KH₂PO₄ (KDP) and NH₄H₂PO₄ (ADP) on a wide temporal scale (10⁻⁸–10 s) under pulsed irradiation. The results of model calculations have been compared with experimental data on the photoinduced transient optical absorption (TOA) in KDP and ADP crystals in the visible and UV ranges. The nature of the radiation-induced defects, which account for the TOA, and the dependence of the TOA decay kinetics on the temperature, excitation power, and other experimental conditions have been considered.     

Photostimulated electron transfer and its action on paramagnetism of Sp<Subscript>3</Subscript>Cr(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript> single crystals

The effect of irradiation by ultraviolet light on the effective magnetic moment of a paramagnetic single crystal based on photochrome spiropyran (Sp) and chromium oxalates Sp₃Cr(C₂O₄)₃ molecules is detected. It is shown that the deviation of the temperature dependence of the magnetic moment from the Curie law is caused not by the exchange interaction, but by electron redistribution between Cr³⁺ and Cr⁴⁺ ions and spiropyran molecules Sp⁰ and Sp⁺. Analysis of the angular dependence of EPR spectra makes it possible to determine the contribution of Cr³⁺ ions to the magnetic properties of the crystals and to determine the crystal field parameters D = 0.619 cm⁻¹ and E = 0.024 cm⁻¹. Irradiation of hydrated samples by ultraviolet light leads to intensity redistribution of EPR lines attributed to Cr³⁺ and Sp⁰. Thermally stimulated paramagnetism of triplet states of spiropyran ions Sp⁺ and the SpI salt is observed.     

Hyperfine structure in EPR spectra of the catalytic system TiCl<Subscript>4</Subscript> + Al(i-C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>3</Subscript>

In an EPR study of the catalytic system TiCl₄ + Al(i-C₄H₉)₃ in toluene and isopentane in TiCl₄/oligopiperylene + Al(i-C₄H₉)₃ in toluene, we have observed a dependence of the linewidth of the hyperfine structure on the mobility of the complex in solution. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 174–177, March–April, 2007.     

Selective Synthesis of Mesoporous and Nanorod CeVO<Subscript>4</Subscript> without Template

A simple and efficient method has been established for the selective synthesis of mesoporous and nanorod CeVO₄ with different precursors by sonochemical method. CeVO₄ nanorod can be simply synthesized by ultrasound irradiation of Ce(NO₃)₃ and NH₄VO₃ in aqueous solution without any surfactant or template. While mesoporous CeVO₄ with high specific surface area can be prepared with Ce(NO₃)₃, V₂O₅ and NaOH in the same way. Mesoporous CeVO₄ has a specific surface area of 122 m² g⁻¹ and an average pore size of 5.2 nm; CeVO₄ nanorods have a diameter of about 5 nm, and a length of 100–150 nm. The ultrasound irradiation and ammonia in the reactive solution are two key factors in the formation of such rod-like products. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) and differential thermal analyses (DTA), UV/vis absorption spectroscopy and Brunauer–Emmett–Teller (BET) were applied for characterization of the as-prepared products.     

Electron paramagnetic resonance and photoluminescence of NaBi(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> crystals doped with gadolinium ions

The results of electron paramagnetic resonance (EPR) and photoluminescence studies of large NaBi(MoO₄)₂ crystals grown by the low-gradient Czochralski method and doped with gadolinium ions (0.1 wt %) have been presented. It has been found from the analysis of the angular dependence of EPR spectra that the gadolinium ions enter into the crystal structure in the state Gd³⁺ and occupy the bismuth position. The parameters of the EPR spectra of the gadolinium ions have been calculated and the analogy has been drawn based on these data between the specific features of the incorporation of gadolinium ions into the structures of double tungstates and molybdates. The observed shift of the maximum of the photoluminescence band of the NaBi(MoO₄)₂ crystals doped with Gd³⁺ ions with respect to the spectrum of the undoped crystal suggests the influence of gadolinium ions on the formation of the bottom of the conduction band caused by the states of the (MoO₄)^2?.     

Magnetic and EPR studies of the EuFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> single crystal

Magnetic and electron paramagnetic resonance (EPR) properties of EuFe₃(BO₃)₄ single crystals have been studied over the temperature range of 300–4.2 K and in a magnetic field up to 5 T. The temperature, field and orientation dependences of susceptibility, magnetization and EPR spectra are presented. An antiferromagnetic ordering of the Fe subsystem occurs at about 37 K. The easy direction of magnetization perpendicular to the c axis is determined by magnetic measurements. Below 10 K, we observe an increase of susceptibility connected with the polarization of the Eu sublattice by an effective exchange field of the ordered Fe magnetic subsystem. In a magnetic field perpendicular to the c axis, we have observed an increase of magnetization at T < 10 K in the applied magnetic field, which can be attributed to the appearance of the magnetic moment induced by the magnetic field applied in the basal plane. According to EPR measurements, the distance between the maximum and minimum of derivative of absorption line of the Lorentz type is equal to 319 Gs. The anisotropy of g-factor and linewidth is due to the influence of crystalline field of trigonal symmetry. The peculiarities of temperature dependence of both intensity and linewidth are caused by the influence of excited states of europium ion (Eu³⁺). It is supposed that the difference between the g-factors from EPR and the magnetic measurements is caused by exchange interaction between rare earth and Fe subsystems via anomalous Zeeman effect.     

EPR of Gd<Superscript>3+</Superscript> ion in mixed CeO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystals

This paper reports on the results of EPR studies of mixed CeO₂-Y₂O₃ crystals (including nanosized crystals) doped by gadolinium ions. It is revealed that the width of the line corresponding to the allowed transition 1/2 ↔ −1/2 between the Kramers-conjugated states |±1/2〉 of the Gd³⁺ ion decreases with a decrease in the powder size from macrosizes to nanosizes. The observed dependence can be due to the increase in the unit cell size during grinding of the samples.     

EPR and optical absorption studies of Cu<Superscript>2+</Superscript> ions in [ZnPd(CN)<Subscript>4</Subscript>(C<Subscript>4</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O<Subscript>2</Subscript>)] single crystals

A Cu²⁺-doped single crystal of catena-trans-bis(N-(2-hydroxyethyl)-ethylenediamine) zinc(II)-tetra-m-cyanopaladate(II) [ZnPd(CN)₄(C₄H₁₂N₂O₂)] complex has been investigated by electron paramagnetic resonance (EPR) technique at room temperature. EPR spectra indicate that Cu²⁺ ions substitute for magnetically equivalent Zn²⁺ ions and form octahedral complexes in [ZnPd(CN)₄(C₄H₁₂N₂O₂)] hosts. The crystal field affecting the Cu²⁺ ion is nearly axial. The optical absorption studies show two bands at 322 nm (30864 cm⁻¹) and 634 nm (15337 cm⁻¹) which confirm the axial symmetry. The spin Hamiltonian parameters and the relevant wave function are determined.     

Efficient visible light-induced photoelectrocatalytic degradation of rhodamine B by polyaniline-sensitized TiO<Subscript>2</Subscript> nanotube arrays

Self-organized anodic TiO₂ nanotube arrays were sensitized with polyaniline by a simple electrodeposite method. The morphological and structural properties studied by scanning electron microscopy and fourier transform infrared spectroscopy reveal the successful deposition of polyaniline on the nanotube arrays. The polyaniline-sensitized TiO₂ nanotube arrays exhibit a distinguishable red shift on the absorption spectrum. Electrochemical impedance investigation attested to a significant improvement of the interfacial electron-transfer kinetics for promoted electron–hole effective separation. The as-prepared samples showed a high efficiency for the photoelectrocatalytic degradation of rhodamine B under visible-light irradiation (λ > 400 nm). The enhanced photoelectrocatalytic activity could be attributed to the extended absorption in the visible-light region by the polyaniline and the effective separation of photogenerated carriers driven by the photoinduced potential difference generated at the polyaniline/TiO₂ nanotube arrays interface.     

One-step synthesis of colloidal Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles at room temperature

A facile room-temperature synthesis has been developed to prepare colloidal Mn₃O₄ and γ-Fe₂O₃ nanoparticles (5 to 25 nm) by an ultrasonic-assisted method in the absence of any additional nucleation and surfactant. The morphology of the as-prepared samples was observed by transmission electron microscopy. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The magnetic properties of the samples were investigated with a superconducting quantum interference device magnetometer. The possible formation process has been proposed.     

High-frequency tunable EPR spectroscopy of non-Kramers ions in AgGaSe<Subscript>2</Subscript>: Cr,AgGaS<Subscript>2</Subscript>: Cr,and CdGa<Subscript>2</Subscript>S<Subscript>4</Subscript>: Cr crystals

Crystals of the chalcopyrite family, AgGaSe₂, AgGaS₂, and CdGa₂S₄, doped with chromium ions have been investigated using high-frequency broad-band EPR spectroscopy in the range 65–530 GHz at T = 4.2 K. It has been revealed that, in the AgGaSe₂ and AgGaS₂ crystals, the Cr²⁺ ions occupy positions with orthorhombic and tetragonal symmetry, whereas the previously investigated CdGaS₄ crystals contain only tetragonal centers. The observed spectra have been described in the framework of the spin-Hamiltonian formalism. Apart from the divalent chromium centers, the EPR lines attributed to non-Kramers ions are observed in the frequency range 300–450 GHz for all the crystals under investigation. The nature of these lines has been discussed.     

Structural,dielectric, electrical and piezoelectric properties of Ba<Subscript>4</Subscript>SrRTi<Subscript>3</Subscript>V<Subscript>7</Subscript>O<Subscript>30</Subscript> (R=Sm,Dy) ceramics

Polycrystalline samples of Ba₄SrRTi₃V₇O₃₀ (R=Sm and Dy), members of the tungsten-bronze family, were prepared using a high-temperature, solid-state reaction technique and studied their electrical properties (using complex impedance spectroscopy) in a wide range of temperature (31–500°C) and frequency (1 kHz-1 MHz). Preliminary structural (XRD) analyses of these compounds show the formation of single-phase, orthorhombic structures at room temperature. The scanning electron micrographs (SEM) provided information on the quality of the samples and uniform distribution of grains over the entire surface of the samples. Detailed studies of the dielectric properties suggest that they have undergone ferroelectric-paraelectric phase transition well above the room temperatures (i.e., 432 and 355°C for R= Sm and Dy, respectively, at frequency 100 kHz). Measurements of electrical conductivity (ac and dc) as a function of temperature suggest that the compounds have semiconducting properties much above the room temperature, with negative temperature coefficient of resistance (NTCR) behavior. The existence of ferroelectricity in these compounds was confirmed from a polarization study.      

Antisite defects and valence state of vanadium in Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Electron paramagnetic resonance (EPR) studies have been performed with the aim of determining the valence state and local crystal structure of the nearest environment of vanadium ions in the initial, charged, and discharged samples of the cathode material Na_xV₂(PO₄)₃ (1 ≤ x ≤ 3). It has been found that the charged sample (x = 1) is characterized by an intense signal corresponding to V⁴⁺ ions located in a highly distorted octahedral crystal field. An EPR signal with the g-factor close to the g-factor of the V⁴⁺ ion has also been observed in the initial sample (x = 3), where the intensity of the resonance signal is one order of magnitude lower than that in the charged sample. It has been revealed that the resonance signal under consideration is associated with the formation of antisite defects when a part of vanadium ions are located in sites of sodium ions. It has also been found that the intensity of this signal increases after a complete charge–discharge cycle (x = 3).     

Optical absorption spectra and magnetic phase transitions in TbFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

Optical absorption spectra of the trigonal crystal of TbFe₃(BO₃)₄ in the vicinity of the ⁷F₆ → ⁵D₄ transition in a Tb³⁺ ion were studied as a function of temperature (2–70 K) and magnetic field strength (0–60 kOe) at 2 K. The splitting of the excited states of Tb³⁺ due to both the magnetic ordering of iron and an external magnetic field was determined. Abrupt splitting of the absorption lines of Tb³⁺ at temperature T_N of the magnetic ordering of the subsystem of iron was revealed, suggesting that the nature of such splitting is not entirely magnetic.     

Kinetics of the transient optical absorption in Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> and LiB<Subscript>3</Subscript>O<Subscript>5</Subscript> lithium borate crystals

This paper reports on a study of the kinetics of electron tunneling transport between electron and hole centers in Li₂B₄O₇ and LiB₃O₅ lithium borate crystals under the conditions where the mobility of one of the partners in the recombination process is thermally stimulated. A mathematical model has been proposed to describe all specific features in the relaxation kinetics of the induced optical density observed in Li₂B₄O₇ (LTB) and LiB₃O₅ (LBO) nonlinear optical crystals within a broad time interval of 10⁻⁸−1 s after a radiation pulse. The results of calculations have been compared with experimental data on transient optical absorption (TOA) of LTB and LBO crystals in the visible and ultraviolet spectral regions. The nature of the radiation defects responsible for TOA and the dependence of the TOA decay kinetics on temperature, excitation power, and other experimental conditions have been discussed.     

Influence of carbon additive on the properties of spherical Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> and LiFePO<Subscript>4</Subscript> materials for lithium-ion batteries

Preparing spherical particles with carbon additive is considered as one effective way to improve both high rate performance and tap density of Li₄Ti₅O₁₂ and LiFePO₄ materials. Spherical Li₄Ti₅O₁₂/C and LiFePO₄/C composites are prepared by spray-drying–solid-state reaction method and controlled crystallization–carbothermal reduction method, respectively. The X-ray diffraction characterization, scanning electron microscope, Brunauer–Emmett–Teller, alternating current impedance analyzing, tap density testing, and electrochemical property measurements are investigated. After hybridizing carbon with a proper quantity, the crystal grain size of active materials is remarkably decreased and the electrochemical properties are obviously improved. The Li₄Ti₅O₁₂/C and LiFePO₄/C composites prepared in this work are spherical. The tap density and the specific surface area are as high as 1.71 g cm⁻³ and 8.26 m² g⁻¹ for spherical Li₄Ti₅O₁₂/C, which are 1.35 g cm⁻³ and 18.86 m² g⁻¹ for spherical LiFePO₄/C powders. Between 1.0 and 3.0 V versus Li, the reversible specific capacity of the Li₄Ti₅O₁₂/C is more than 150 mAh g⁻¹ at 1.0-C rate. Between 2.5 and 4.2 V versus Li, the reversible capacity of the LiFePO₄/C is close to 140 mAh g⁻¹ at 1.0-C rate.     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

An improved method for preparation of Ce<Subscript>0.8</Subscript>Pr<Subscript>0.2</Subscript>O<Subscript>Y</Subscript> solid solutions with nanoparticles smaller than 10 nm

Ce_0.8Pr_0.2O_Y solid solutions with ultrafine crystalline sizes and high specific surface area were prepared by an improved citrate precursor method, where a nitrogen treatment was added prior to calcinations in air. The samples were characterized by TG-DSC, Raman spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET nitrogen adsorption. XRD and Raman results show that the formation of Ce_0.8Pr_0.2O_Y solid solutions typical of the fluorite-like cubic structure with oxygen vacancies occurs when the Ce–Pr citrate precursors are heated at high temperature in the nitrogen atmosphere. Subsequent calcinations at a low temperature in air to remove carbon species have no apparent effects on the formed solid solutions. Ce_0.8Pr_0.2O_Y solid solution prepared by the improved citrate precursor method at 800°C has ultrafine nanoparticles of less than 10 nm and high specific surface area of 92.1 m²/g, while the sample prepared by the conventional citrate precursor method has mean particle size of 62.1 nm and specific surface area of 18.1 m²/g. Furthermore, Ce–Pr solid solution by the improved method have the mesoporous structure, more lattice defects and oxygen vacancies, which will have a promising application in the catalyst region as well as SOFC field.     

Influence of magnetic ordering on electronic structure of Tb<Superscript>3+</Superscript> ion in TbFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystal

Optical absorption spectra of trigonal crystal TbFe₃(BO₃)₄ have been studied in the region of ⁷F₆ → ⁵D₄ transition in Tb³⁺ ion depending on temperature (2–220 K) and on magnetic field (0–60 kOe). Splitting of the Tb³⁺ excited states, both under the influence of the external magnetic field and effective exchange field of the Fe-sublattice, have been determined. Landé factors of the excited states have been found. Stepwise splitting of one of the absorption lines has been discovered in the region of the Fe-sublattice magnetic ordering temperature. This is shown to be due to the abrupt change of equilibrium geometry of the local Tb³⁺ ion environment only in the excited state of the Tb³⁺ ion. In general, the magnetic ordering is accompanied by temperature variations of the Tb³⁺ local environment in the excited states. The crystal field splitting components have been identified. In particular, it has been shown that the ground state (in D ₃ symmetry approximation) consists of two close singlet states of A ₁ and A ₂ type, which are split and magnetized by effective exchange field of the Fe-sublattice. Orientations of magnetic moments of the excited electronic states relative to that of the ground state have been experimentally determined in the magnetically ordered state of the crystal. A pronounced shift of one of absorption lines has been observed in the vicinity of the TbFe₃(BO₃)₄ structural phase transition. The temperature interval of coexistence of the phases is about 3 K.     

Impurity band in SnBi<Subscript>4</Subscript>Se<Subscript>7</Subscript>: thermoelectric power and electrical resistivity measurements

Thermoelectric power and electrical resistivity measurements on polycrystalline samples of Bi₂Se₃ and stoichiometric ternary compound in the quasi-binary system SnSe–Bi₂Se₃ in the temperature range of 90–420 K are presented and explained assuming the existence of an impurity band. The variation of the electron concentration with temperature above 300 K is explained in terms of the thermal activation of a shallow donor, by using a single conduction band model. The density of states effective mass m ^*=0.15m ₀ of the electrons, the activation energy of the donors, their concentration, and the compensation ratio are estimated. The temperature dependence of the electron mobility in conduction band is analyzed by taking into account the scattering of the charge carriers by acoustic phonon, optical phonon, and polar optical phonon as well as by alloy and ionized impurity modes. On the other hand, by considering the two-band model with electrons in both the conduction and impurity bands, the change in the electrical resistivity with temperature between 420 and 90 K is explained.