The transverse laser induced thermoelectric voltages in step flow growth （1-x）Pb(Mg1/3Nb2/3)O3-xPbTiO3 thin films

This paper reports that the transverse laser induced thermoelectric voltages (LITV) are observed for the first time in the step flow growth (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT,x = 0.20, 0.33, 0.50) thin films deposited on vicinal-cut strontium titanate single crystal substrates. Because lead magnesium niobate-lead titanate is a solid solution of lead magnesium niobate (PMN) and lead titanate (PT), there are two types of signals. One is wide with a time response of a microsecond, and the other superimposed with the wide signal is narrow with a time response of a nanosecond. The transverse LITV signals depend on the ratio of PMN to PT drastically. Under the irradiation of 28-ns pulsed KrF excimer laser with the 248-nm wavelength,the largest induced voltage is observed in the 0.50Pb(Mg1/Nb2/3)O3-0.50PbTiO3 films. Moreover, the effects of film thickness, substrates, and tilt angles of substrates are also investigated.     

高温无铅BaTiO_3-(Bi_(1/2)Na_(1/2))TiO_3正温度系数电阻陶瓷阻抗和介电谱分析

采用固相反应法制备了Y2O3施主掺杂的92 mol%BaTiO3-8 mol%(Bi1/2Na1/2)TiO3(BBNT8)高温无铅正温度系数电阻(positive temperature coe?cient resistivity,PTCR)陶瓷.利用透射电镜观察材料的显微结构,发现陶瓷的显微结构主要包括晶粒和晶界两部分,观察不到明显的壳层结构.进一步利用交流阻抗谱研究了陶瓷的宏观电学性能,发现陶瓷的总电阻是晶粒和晶界两部分的贡献,而晶粒电阻很小,在居里温度以上变化不大,材料的PTCR效应主要是晶界部分的贡献.当温度高于居里温度时,随着温度的升高,晶界介电常数逐渐减小,导致势垒增加,晶界电阻增大,从而产生正温度系数效应.最后,通过测试材料的介电频谱特性,研究计算了陶瓷的室温电阻率.     

蓝宝石衬底上Gd2O3掺杂CeO2氧离子导体电解质薄膜的生长及电学性能

采用反应磁控溅射方法,在(0001)蓝宝石单晶衬底上,制备了纳米多晶Gd₂O₃掺杂CeO₂(GDC)氧离子导体电解质薄膜,采用X射线衍射仪(XRD)、原子力显微镜(AFM)对薄膜物相、结构、粗糙度、表面形貌等生长特性进行了表征,利用交流阻抗谱仪测试了GDC薄膜不同温度下的电学性能;实验结果表明,GDC薄膜为面心立方结构,在所研究的衬底温度范围内,均呈强(111)织构生长;薄膜表面形貌随衬底温度发生阶段性变化：衬底温度由室温升高到300℃时, 关键词： 2O₃掺杂CeO₂电解质薄膜')" href="#">Gd₂O₃掺杂CeO₂电解质薄膜 反应磁控溅射 生长特性 电学性能     

纳米Cu3N薄膜的制备与性能

采用柱状靶多弧直流磁控溅射法，100℃基底温度下在玻璃衬底上制备了纳米氮化铜(Cu3₃N)薄膜.用x射线衍射研究了不同氮气分压对Cu3₃N薄膜晶体结构 及晶粒尺寸的影响.结果显 示薄膜由Cu3₃N和Cu的纳米微晶复合而成，其中Cu3₃N纳米微晶具有 立方反ReO3₃结构.通 过原子力显微镜对薄膜表征显示，膜表面比较光滑，具有较低的粗糙度.x射线光电子能谱对 薄膜表面的成分分析表明，Cu3 _{关键词： 氮化铜薄膜 多弧直流磁控溅射 3}结构')" href="#">立方反ReO3₃结构     

Magnetic field dependence of conductance and conduction noise of an artificial grain boundary junction in a La0.67Ba0.33MnO3 epitaxial thin film

A single artificial grain boundary in La_0.67Ba_0.33MnO₃ (LBMO) thin film has been prepared by depositing the film on a bicrystal substrate using laser ablation technique. We investigated the magnetic field dependence of magnetoresistance and conductance-voltage characteristics of the grain boundary at 77 K. A decrease of nonlinearity of current-voltage characteristics was observed upon application of magnetic field. The results are explained by assuming the presence of two different types of parallel conducting channels (metallic and highly resistive) across the grain boundary. The analysis of the results reveals that the application of magnetic field suppresses magnetic disorders at the grain boundary region and increases metallic conduction channels across the grain boundary. The temperature dependence of the conduction noise of the bicrystal grain boundary was measured at 0 and 1.5 kG magnetic field and compared with a microbridge on the LBMO film having no grain boundary. The presence of the grain boundary was found to enhance noise by one order of magnitude. The noise of a bicrystal grain boundary showed a decrease in the presence of 1.5 kG magnetic field for T<210 K. This decrease of noise confirms that the application of a magnetic field induces more metallic channels across the grain boundary.     

Effect of microstructure on thermoelectric properties of CSD-grown Bi2Sr2Co2Oy thin films

Three Bi₂Sr₂Co₂O_y thin films with different microstructures have been prepared by chemical solution deposition on LaAlO₃(001) through varying the annealing temperature. With the decrease in the annealing temperature, both the size and c-axis alignment degree of grains in the film decrease as well, leading to an increase in the film resistivity. In addition, the decrease in the annealing temperature also results in a slight increase in the seebeck coefficient due to the enhanced energy filtering effect of small-grain film. The nanostructured Bi₂Sr₂Co₂O_y film with the average grain size of about 100 nm shows a power factor comparable to that of the films with larger grains. Since the thermal conductivity of the nanostrcutured films can be depressed due to the enhanced phonon scattering by grain boundary, a higher figure of merit is expected in Bi₂Sr₂Co₂O_y thin film with grains in nanometer size.     

Microstructure and electrical properties of Ba0.5Sr0.5TiO3 thin films prepared on copper foils with La2O3 buffer layers

Ba_0.5Sr_0.5TiO₃ (BST) thin films were deposited on copper foils via sol-gel method with La₂O₃ as a buffer layer. The films were processed in almost inert atmosphere so that the substrate oxidation was avoided while allowing the perovskite film phase to crystallize. The existence of a La₂O₃ buffer layer between the BST thin film and Cu foil improved the dielectric constant and reduced the leakage current density of the BST thin film. Meanwhile, the BST thin film exhibited ferroelectric character at room temperature, which was contrast to the para-electric behavior of the film without the buffer layer. Effects of La₂O₃ buffer layer on the crystallizability and microstructure of BST thin films were also investigated.     

Structural and electrical properties of (Na0.85K0.15)0.5Bi0.5TiO3 thin films deposited on LaNiO3 and Pt bottom electrodes

(Na_0.85K_0.15)_0.5Bi_0.5TiO₃ thin films were deposited on LaNiO₃(LNO)/SiO₂/Si(1 0 0) and Pt/Ti/SiO₂/Si(1 0 0) substrates by metal-organic decomposition, and the effects of bottom electrodes LNO and Pt on the ferroelectric, dielectric and piezoelectric properties were investigated by ferroelectric tester, impedance analyzer and scanning probe microscopy, respectively. For the thin films deposited on LNO and Pt electrodes, the remnant polarization 2P_r are about 22.6 and 8.8 μC/cm² under 375 kV/cm, the dielectric constants 238 and 579 at 10 kHz, the dielectric losses 0.06 and 0.30 at 10 kHz, the statistic d_33eff values 95 and 81 pm/V. The improved piezoelectric properties could make (Na_1−xK_x)_0.5Bi_0.5TiO₃ thin film as a promising candidate for piezoelectric thin film devices.     

Dielectric and impedance measurements on (1−x)Ba(Fe1/2Ta1/2)O3-xBa(Zn1/3Ta2/3)O3 ceramics

In this work, ((1−x)Ba(Fe_1/2Ta_1/2)O₃-xBa(Zn_1/3Ta_2/3)O₃), ((1−x)BFT-xBZT) ceramics with x = 0.00–0.12 were synthesized by the solid–state reaction method. X-ray diffraction data revealed that both the powders and ceramics were of a pure-phase cubic perovskite structure. All ceramics showed large dielectric constants. For the x = 0.12 sample, a very high dielectric constant (>20,600) was observed. A lowering in the dielectric loss compared to pure BFT ceramics was observed with the BZT addition. The impedance measurements indicated that BZT has a strong effect on the bulk grain and grain boundary resistance of BFT ceramics. These results are in agreement with the measured dielectric properties. Based on dielectric and impedance results, (1−x)BFT-xBZT ceramics could be of great interest for high performance dielectric materials applications due their giant dielectric constant behavior.     

退火气压对Bi3.25La0.75Ti3O12铁电薄膜的微观结构和铁电性能的影响

采用sol-gel法在Pt/TiO₂/SiO₂/p-Si(100)衬底上制备了Bi_3.25La_0.75Ti₃O₁₂(BLT)铁电薄膜,研究了在750 ℃时不同退火气压(p_{O2:10^-4—3 atm)对薄膜微观结构和电学性能的影响.XRD和拉曼光谱结果表明在10^-4和3 atm氧气压下退火 关键词： 3.25}La_0.75Ti₃O₁₂')" href="#">Bi_3.25La_0.75Ti₃O₁₂ 铁电性能 sol-gel法 正交化度     

The microwave response of MgB2 /Al2O3 superconducting thin films

Microwave characteristics of MgB2/Al2O3 superconducting thin films were investigated by coplanar resonator technique. The thin films studied have different grain sizes resulting from different growth techniques. The experimental results can be described very well by a grain-size model which combines coplanar resonator theory and Josephson junction network model. It was found that the penetration depth and surface resistance of thin films with smaller grain sizes are larger than those of thin films with larger grain sizes.     

Structural characterization of La0.9Ba0.1MnO3/Y-ZrO2 film by X-ray diffraction

Perovskite manganite La_0.9Ba_0.1MnO₃(LBMO) films were deposited on (0 0 1)-oriented single crystal yttria-stabilized zirconia (YSZ) substrate by 90° off-axis radio frequency magnetron sputtering. The film thickness ranged from 10 nm to 100 nm. Grazing incidence X-ray diffraction technique and high resolution X-ray diffraction were applied to characterize the structure of LBMO films. The LBMO film mainly consisted of (0 0 1)-orientated grain as well as weakly textured (1 1 0)-orientated grain. The results indicated that an amorphous layer with thickness of about 4 nm was formed at the LBMO/YSZ interface. The strain in LBMO film was small and averaged to be about -0.14%. The strain in the film was not lattice mismatch-induced strain but residual strain due to the difference in thermal expansion coefficient between film and substrate.     

Cathode luminescence characteristics of ZnGa2O4 phosphor thin films with the doped activator

The zincgallate (ZnGa₂O₄) phosphor thin film was grown using RF magnetron sputtering system at various process parameters. A ZnGa₂O₄ phosphor thin film was deposited on Si(1 0 0) substrate and annealed by a rapid thermal processor (RTP). The X-ray diffractometer (XRD) patterns indicate that the Mn-doped ZnGa₂O₄ phosphor thin film shows a (3 1 1) main peak and a spinel phase. A ZnGa₂O₄ phosphor thin film has better crystallization due to increased substrate, annealing temperature and deposition time. Also the ZnGa₂O₄:Mn phosphor thin film shows green emission (510 nm, ⁴T₁→⁶A₁), and the ZnGa₂O₄:Cr phosphor thin film shows red emission (705 nm, ⁴A₂→⁴T₂).     

Studies on electrodeposited As2S3 thin films by double exposure holographic interferometry technique

Arsenic trisulphide (As₂S₃) thin films have been deposited onto stainless steel and fluorine doped tin oxide (FTO) coated glass substrates by electrodeposition technique using arsenic trioxide (As₂O₃) and sodium thiosulphate (Na₂S₂O₃) as precursors and ethylene diamine tetracetic acid (EDTA) as a complexing agent. Double exposure holographic interferometry (DEHI) technique was used to determine the thickness and stress of As₂S₃ thin films. It was observed that the thickness of the thin film increases whereas film stress to the substrate decreases with an increase in the deposition time. X-ray diffraction and water contact angle measurements showed polycrystalline and hydrophilic surface respectively. The bandgap energy increases from 1.82 to 2.45 eV with decrease in the film thickness from 2.2148 to 0.9492 μm.     

Low-temperature transport properties of chemical solution deposited polycrystalline La0.7Sr0.3MnO3 ferromagnetic films under a magnetic field

Polycrystalline La_0.7Sr_0.3MnO₃ (LSMO) films were prepared on SiO₂/Si (001) substrates by chemical solution deposition technique. Electrical and magnetic properties of LSMO were investigated. A minimum phenomenon in resistivity is found at the low temperature (<50 K) under magnetic fields from 0 T to 3 T. Kondo-like spin dependent scattering, which includes both spin polarization and grain boundary tunneling, was observed in the low-temperature electrical transport for the LSMO polycrystalline films. The temperature-dependent resistivity at low temperatures can be well fitted in the framework of elastic scattering, electron-electron (e-e) interaction, Kondo-like spin dependent scattering, and electron-phonon (e-ph) interaction.     

氧压对SrTiO3和SrNb0.2Ti0.8O3薄膜晶格参数的影响及激光感生热电电压效应

采用脉冲激光沉积技术制备了SrTiO₃和SrNb_0.2Ti_0.8O₃薄膜.X射线衍射分析表明在LaAlO₃(100)单晶平衬底上生长的SrTiO₃及SrNb_0.2Ti_0.8O₃薄膜是沿［001］取向的近外延生长.随着氧压在一定范围内逐渐增大,SrTiO₃薄膜的晶格参数减小,而SrNb_0.2Ti_0.8O₃薄膜的晶格参数先减小后增大.同时摸索出制备具有二维电子气超晶格(SrTiO₃/SrNb_0.2Ti_0.8O₃)_L的最佳氧压为1.0×10^-2Pa.另外在LaAlO₃(100)倾斜衬底上制备的SrNb_0.2Ti_0.8O₃薄膜中观察到激光感生热电电压效应. 关键词： 0.2Ti_0.8O₃薄膜')" href="#">SrNb_0.2Ti_0.8O₃薄膜 晶格参数 激光感生热电电压 脉冲激光沉积     

Laser-induced voltage effects in Ca3Co4O9 thin films on tilted LaAlO3（001） substrates grown by chemical solution deposition

Laser-induced voltage effects in c-axis oriented Ca3Co4O9 thin films have been studied with samples fabricated on 10 tilted LaAlO3(001) substrates by a simple chemical solution deposition method. An open-circuit voltage with a rise time of about 10 ns and full width at half maximum of about 28 ns is detected when the film surface is irradiated by a 308-nm laser pulse with a duration of 25 ns. Besides, open-circuit voltage signals are also observed when the film surface is irradiated separately by the laser pulses of 532 nm and 1064 nm. The results indicate that Ca3Co4O9 thin films have a great potential application in the wide range photodetctor from the ultraviolet to near infrared regions.     

Chemical bath deposition of hausmannite Mn3O4 thin films

A low-temperature chemical bath deposition (CBD) technique has been used for the preparation of Mn₃O₄ thin films onto glass substrates. The kinetic behavior and the formation mechanism of the solid thin films from the aqueous solution have been investigated. Structure (X-ray diffraction and Raman), morphological (atom force microscope), and optical (UV-vis-NIR) characterizations of the deposited films are presented. The results indicated that the deposited Mn₃O₄ thin films of smooth surface with nanosized grains were well crystalline and the optical bandgap of the film was estimated to be 2.54 eV.     

Thickness-dependent tunable characteristics of (Ba0.5Sr0.5)0.925K0.075TiO3 thin films prepared by pulsed laser deposition

The thickness-dependent dielectric properties and tunability of pulsed laser deposited (Ba_0.5Sr_0.5)_0.925K_0.075TiO₃ (BSKT) thin films with different thickness ranging from 80 to 300 nm has been investigated. Dielectric properties of the BSKT thin films are substantially improved as the BSKT film thickness increases, which can be explained by the model of a low-permittivity dead layer that is connected in series with the bulk region of the film. The estimated values of thickness and the average dielectric constant for the dead layer are 2.4 nm and 23.5, respectively, in a Pt/BSKT/Pt capacitor structure. The tunability and figure of merit increased with increasing film thickness, which are attributed to the change in lattice parameter and the dead layer effect.     

Oxygen pressure dependent electroresistance in La0.9Sr0.1MnO3 thin films grown by laser molecular beam epitaxy

We report here studies on the influence of oxygen pressure on the electroresistance behavior of La_0.9Sr_0.1MnO₃ thin films fabricated by laser molecular beam epitaxy. It was found that the film deposited at lower oxygen pressure shows larger c-axis parameter, higher resistance, and more distinct electroresistance. These results reveal that the electroresistance of manganite thin films can be tuned by the conditions of film fabrication. Supported by the National Natural Science Foundation of China (Grant No. 10334070) and the National Key Basic Research Program of China (Grant No. 2004CB619004)