梯形截面硅基水平多槽纳米线定向耦合器全矢量分析

定向耦合器是构成各类光子器件的基础元件. 本文采用一种基于电场分量的全矢量有限元法, 分析由梯形截面硅基水平多槽纳米线构成的定向耦合器. 给出了准TE与准TM偶、奇模有效折射率、耦合长度及模场分布, 揭示了其模式的混合特性及模场分布特点. 分析结果表明, 准TE模与准TM模的耦合长度随波导间距的增大均呈指数增长, 其中准TE模的耦合长度对波导侧壁倾角的变化敏感, 而准TM模的耦合长度对槽厚及槽折射率的变化敏感. 恰当选择结构与材料参数, 可实现两偏振态下相同耦合长度, 定向耦合器在偏振无关条件下工作.     

InGaAs/InAlAs多量子阱脊形波导及定向耦合器光波特性准矢量分析

提出了一种基于级数展开的三维准矢量束传播法(SE-QV-BPM)用以分析由InGaAs/InAlAs多量子阱构成的脊形光波导及定向耦合器.结果表明，刻蚀深度相同时，TM模比TE模在水平方向限制强，且TM模的模场在波导角上出现畸变；波导间距相同时，定向耦合器TM波的耦合长度大于TE波的耦合长度，对偏振态敏感.分析获得了浅/深刻脊形光波导承载的准矢量TE/TM基模、定向耦合器承载的TE/TM偶/奇模的模场分布及其有效折射率，模拟了光场在定向耦合器中的传输演变情况.另外，SE-QV-BPM导出矩阵小，计算效率高 关键词： 级数展开 准矢量束传播法 多量子阱 InGaAs/InAlAs     

聚合物填充的狭缝波导定向耦合器的数值分析(英文)

利用亥姆霍兹方程和有限差分法,给出一种用于分析聚合物SU-8填充的双狭缝波导定向耦合特性的数值方法,推导出双耦合狭缝波导模式特性的特征方程,并做了离散化和稀疏化处理,得到耦合波导的模式场分布和有效折射率.通过求解最高阶偶对称和最高阶奇对称模式的有效折射率,得到TE和TM偏振态下定向耦合器的耦合长度.数值分析结果表明,当耦合间距小于800nm时,耦合长度小于100μm.利用椭偏仪测得狭缝波导各层材料的光学参数随工作波长的色散关系,研究分析了双狭缝波导耦合长度和模式损耗的色散特性.分析显示,随着工作波长的增大,两种偏振模式下的耦合长度均减小,且TM模式下的耦合长度大于TE模式下的耦合长度,当工作波长为1 550nm时,二者分别为28.2和26.2μm(两狭缝波导间的耦合间距为0.5μm时).同时,模式损耗也随波长的增大而减小,且TE模式损耗大于TM模式损耗,当工作波长为1 550nm时,TE及TM模式的振幅衰减系数分别为5.65和3.16dB/cm.     

平面光波导型单纤三向器的研究

利用光束传输法,分析设计了一种只由两个定向耦合器构成、能直接与单模光纤相耦合、易于集成的平面光波导（Planar Lightwave Circuit,PLC）型1.31/1.49/1.55 μm单纤三向器.该器件的输入输出弯曲波导和耦合区平行波导均采用光束传输法进行优化设计,并对器件的折射率进行了容差分析,获得了当两个定向耦合器的耦合长度分别为6 578 μm、3953 μm时,器件对各波长的隔离度均在47 dB以上,且插入损耗小于0.05 dB.     

基于硅基波导光子轨道角动量的产生及复用

设计了一种基于硅基波导光子轨道角动量的产生及复用器,该器件主要由非对称定向耦合器和带沟槽的波导两部分组成。根据相位匹配条件,基模TE_(00)通过非对称定向耦合器耦合成一阶模TE_(10),带沟槽的波导可支持光轴相对于水平和垂直方向旋转45°的两个正交的本征模,调整两个正交的本征模的相位差,使其进行简并,可进一步将TE_(10)转换为多种轨道角动量模式,并在第二个沟槽结构中进行复用。采用时域有限差分法进行仿真计算,结果表明:该器件可以实现拓扑荷为+1、0、-1的光子轨道角动量模式的产生及复用,且器件结构紧凑,尺寸小于80μm×5.3μm,损耗小于0.24dB,适用波长范围为1.47～1.58μm。该器件制作工艺简单,易于集成,可应用于轨道角动量复用系统等领域。     

一种电光可调的铌酸锂/钠基表面等离子体定向耦合器

为了满足日益增加的集成光子器件设计的需求,本文研究了一种铌酸锂/钠表面等离子体波导(Li Nb O3/Na surface plasmonic waveguide, LNSPW),并利用LNSPW构成电光可调的定向耦合器(directional coupling,DC).利用有限元方法 (finite element method, FEM)对波导的模式特性和耦合器的耦合特性进行了分析.结果表明,随着波导尺寸的增大,传播长度可达约200μm,归一化有效模场面积小于0.4.通过调节耦合间距(W_gap)、耦合长度(L_C)和工作波长(λ)等参数,铌酸锂钠表面等离子体波导构建的定向耦合结构可实现3 d B耦合.当W_gap=100 nm和L_C=17μm时, DC在V₀=53 V时可实现3 d B耦合,且具有较好的方向性和隔离度.LNSPW的研究为实现可调的DC提供了一种可行的方案,在集成电光可调器件研究领域有潜在的应用前景.除此之外, LNSPW还可广泛应用于非线性光学、光信号处理及光全...     

平面弯曲波导耦合器的特性分析

根据耦合模理论和弯曲波导耦合器的结构特点,对平面弯曲波导耦合器的特性进行了分析,结果表明弯曲波导耦合器的弯曲半径和最小间距两个可调变量,增加了波导器件设计的灵活性;同时由于等效耦合长度的调制作用使得弯曲波导耦合器在波分复用/解复用中比平行直波导耦合器具有更大的复用带宽;分析了弯曲半径和最小间距对弯曲波导耦合器复用带宽的影响,为实际波导器件的设计制作提供了一定的理论依据.     

基于LiNbO_3的长周期波导光栅可调谐耦合器的设计

设计了一种基于LiNbO_3的长周期波导光栅可调谐耦合器.该耦合器利用长周期光栅的独有特性将输入波导的导模经包层模耦合至输出波导导模.由于LiNbO_3的电光效应,波导光栅芯层与包层的有效折射率随外加电压变化,从而耦合器的谐振波长及耦合效率可由外加电压调谐.分析了光栅周期与耦合器的长度对耦合器带宽和耦合效率调谐范围的影响,以及波导尺寸对谐振波长调谐灵敏度的影响.结果表明光栅周期越短,耦合器长度越长,则耦合器的带宽越窄,耦合效率调谐范围也越大.此外,谐振波长调谐灵敏度随波导宽度的增加而减小,而波导厚度对谐振波长调谐灵敏度的影响可以忽略.对光栅周期为94μm、长度为3.52cm的耦合器进行仿真,结果表明,谐振波长灵敏度为26.2pm/V,3dB带宽可达4.5nm,当外加电压从0变化到200V时,谐振波长变化5.24nm,耦合效率可在1到0.15之间进行调谐.     

一种多模干涉耦合器的性能模拟

为减小多模干涉（Multimode Interference ,MMI）耦合器件的尺寸,提出一种多模波导宽度为指数型变化的Taper结构.理论分析了多模波导长度与该Taper结构的参量之间的关系.与已被用于减小MMI器件尺寸的抛物线型Taper结构相比,该结构可进一步减小器件的尺寸.就几种波导结构参量下的MMI耦合器,利用宽角光束传播法进行了数值模拟.结果表明,指数型MMI耦合器的性能与抛物线型MMI耦合器的性能类似.指数型Taper结构可以用于MMI器件以减小该类器件的尺寸.     

有限元分析法在SOI基微环谐振器设计中的应用

利用有限元法(FEM)分析了大横截面SOI(Silicon-on-insulator)脊型波导的本征模式分布,确定了脊型波导的单模条件。在保证单模传输的情况下,模拟了SOI微环谐振器中波导耦合器的耦合长度、功率耦合系数与波导尺寸和间距的关系。模拟结果表明:对于W=1μm,H=2μm的SOI脊型波导耦合器,耦合长度LC随波导间距d的增加而增大,功率耦合系数随之减小。在波导间距d0.8μm的情况下,耦合长度LC随着归一化脊高r的增加而增大,当d0.8μm时,耦合长度LC随r的增加而减小。模拟结果为SOI微环谐振器的设计和应用提供了理论依据。     

Design of a compact polarization beam splitter based on a deformed photonic crystal directional coupler

In this paper a compact polarization beam splitter based on a deformed photonic crystal directional coupler is designed and simulated. The transverse-electric （TE） guided mode and transverse-magnetic （TM） guided mode are split due to different guiding mechanisms. The effect of the shape deformation of the air holes on the coupler is studied. It discovered that the coupling strength of the coupled waveguldes is strongly enhanced by introducing elliptical airholes, which reduce the device length to less than 18.Sttm. A finite-difference tlme-domain simulation is performed to evaluate the performance of the device, and the extinction ratios for both TE and TM polarized light are higher than 20 dB.     

Optical interleaver based on directional coupler in a 2D photonic crystal slab with triangular lattice of air holes

A small-size optical interleaver based on directional coupler in a 2D photonic crystal slab with triangular lattice of air holes is designed and theoretically simulated using plane wave expansion and finite-difference time-domain method. The interleaver is formed by two parallel and identical photonic crystal slab waveguides which are separated by three rows of air holes. The coupling region is designed below the light line to avoid vertical radiation. The simulated results show that the coupling coefficient is increased and the final length of the interleaver is decreased by enlarging the radius of the middle row of air holes. The transmission properties are analyzed after the interleaver’s structure is optimized, and around 100 GHz channel spacing can be got when the length of the interleaver is chosen as 40.5 μm.     

A very short vertical directional coupler with polarization-insensitive high extinction ratios

We propose a very short vertical directional coupler with polarization-insensitive high extinction ratios. The structure of the coupler has two deep-ridge waveguide structures in the upper and lower parts which can be implemented using a double-sided wafer process. The coupling length and extinction ratios of the vertical directional coupler with symmetric structures decrease as the thicknesses of the inner cladding layer and core layer decrease. The extinction ratio is improved using a slight asymmetry in the refractive indices of two core layers. As the thicknesses of the inner cladding layer and core layer decrease, the length of the vertical directional coupler for extinction ratios greater than 30 dB of both TE and TM modes decreases. A vertical directional coupler with a very short length less than 100 μm and polarization-insensitive high extinction ratios greater than 30 dB can be implemented using the structure proposed in this paper.     

Polarisation splitter/combiner based on an antiresonant directional coupler

The theoretical performance of a new polarisation splitter/combiner based on a directional coupler is studied using vectorial mode analysis. The device includes an efficient antiresonant mirror transparent to TM polarisation and opaque to TE polarisation. Simulations indicate a high level of TM light can be transferred from the input waveguide into the non-excited guide for coupling lengths shorter than 1 mm. In addition, coupling efficiency of 80% and extinction ratios close to 30 dB have been obtained in a not optimised device.     

Hybrid vertical directional coupling between a long range surface plasmon polariton waveguide and a dielectric waveguide

To investigate light coupling between a long range surface plasmon polariton (LRSPP) waveguide and a conventional integrated optical component, a hybrid vertical directional coupler consisting of a LRSPP waveguides and a dielectric waveguide is investigated and fabricated. In the proposed coupler the dielectric waveguide and LRSPP waveguide are vertically configured for dense integration and strong coupling. The characteristics of the even and odd super-modes of the coupler are also analyzed to design the device. The fabricated device exhibits damped sinusoidal behavior along the coupling length due to propagation loss of the LRSPP waveguide. The maximum power transfer of 86% from the LRSPP waveguide to the dielectric waveguide is achieved at the coupling length of 600 μm. The measured characteristics of the device are in relatively good agreement with a theoretical analysis.     

基于Ti扩散铌酸锂偏振分束器的研制

对定向耦合型偏振分束器的原理进行了分析。设计了一种零间距定向耦合器,在空间上实现TE/TM模式分束;用BPM软件对所设计的器件进行仿真模拟,对于TE/TM模的消光比分别可以达到21.2dB和19.5dB;该器件在X切Y传的LiNbO3晶片上采用Ti扩散技术制作完成。实验样品消光比测试结果TE/TM模分别为11.5dB和19.1dB,对于消光比不够理想的原因进行了初步的分析。     

Ultracompact and silicon-on-insulator-compatible polarization splitter based on asymmetric plasmonic–dielectric coupling

An ultracompact and silicon-on-insulator-compatible polarization splitter (PS) is proposed by utilizing asymmetric directional coupling between a hybrid plasmonic waveguide and a strip dielectric waveguide. Owing to the plasmon-assisted asymmetry, birefringence is highly enhanced. Polarization splitting can be realized by strong coupling of one polarization while the other polarization is phase-mismatched. As an example, a PS based on strong TM coupling is demonstrated at the wavelength of 1.55 μm with a coupling length of 4.13 μm. Extinction ratios are 20.9 and 16.4 dB for TM and TE polarizations, respectively. The device is also broadband and fabrication-tolerant.     

1x2 Multimode interference couplers based on semiconductor hollow waveguides formed from omnidirectional reflectors

A 1x2 hollow multimode interference (MMI) coupler based on semiconductor hollow waveguides formed from omnidirectional reflectors (SHOW-ODR) is demonstrated. The device has a shorter coupling length than a conventional silicon-on-insulator MMI coupler. A 2 dB uniformity was achieved at operating wavelengths between 1520 and 1562 nm. The device exhibited a weak polarization dependence in the TE and TM modes.     

A compact polarization splitter utilizing directional coupler with left-handed material

A compact polarization splitter (PS) with left-handed material (LHM) sandwiched between two right-handed material (RHM) waveguides of a directional coupler (DC) is proposed. Its operation is by setting the coupling length of TM polarization be half that of TE polarization. Theoretic analysis exhibits that the PS with a very small size of 138.4 μm × 18.6 μm can be realized due to the inclusion of LHM even when the RHM with small birefringence is used.