硅基槽式微环谐振腔型偏振解复用器全矢量分析

提出一种紧凑型偏振解复用器, 其中两条常规硅基波导作为输入/输出信号通道, 居于其中的槽式微环谐振腔用于偏振态/波长选择组件. 采用全矢量频域有限差分法详细分析了硅基常规及槽波导的模式特性, 结果发现其横磁模的模场布及其有效折射率相似, 而其横电模相应的特性则差异明显, 结果输入横磁模能够在谐振工作波长下从下路端口输出, 而输入横电模与微环耦合可以忽略, 直接从直通端口输出, 从而实现两偏振态的高效分离. 采用全矢量时域有限差分法详细分析了该偏振解复用器的光波传输特性, 结果表明, 当微环半径为3.489 μm时, 在1.55 μm工作波长下, 横磁模与横电模的消光比与插入损耗分别为 ～ 26.12 (36.67) dB与 ～ 0.49 (0.09) dB. 另外, 论文详细讨论了器件关键结构参数的制作容差, 并给出了输入模场在器件中的传输演变情况.     

Full-vectorial finite-difference beam propagation method based on the modified alternating direction implicit method

A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on $H$ fields. The cross-coupling terms are neglected in the first sub-step, but evaluated and doubly used in the second sub-step. The order of two sub-steps is reversed for each transverse magnetic field component so that the cross-coupling terms are always expressed in implicit form, thus the calculation is very efficient and stable. Moreover, an improved six-point finite-difference scheme with high accuracy independent of specific structures of waveguide is also constructed to approximate the cross-coupling terms along the transverse directions. The imaginary-distance procedure is used to assess the validity and utility of the present method. The field patterns and the normalized propagation constants of the fundamental mode for a buried rectangular waveguide and a rib waveguide are presented. Solutions are in excellent agreement with the benchmark results from the modal transverse resonance method.     

Semi-vectorial analysis of a compact wavelength demultiplexer based on the tapered multimode interference coupler

Based on a parabolically tapered multimode interference (MMI) coupler with a deep-etched SiO₂/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55\mum wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method (3D-SV-FD-BPM). The results show that a MMI section of 330.0\mum in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55\mum, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states. The alternating direction implicit algorithm with the Crank--Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components H_y and H_x along the vertical and horizontal interfaces, respectively, are involved.     

A quasi-vector finite difference mode solver for optical waveguides with step-index profiles

A finite difference scheme based on the polynomial interpolation is constructed to solve the quasi-vector equations for optical waveguides with step-index profiles. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are taken into account. The numerical results include the polarization effects, but the memory requirement is the same as in solving the scalar wave equation. Moreover, the proposed finite difference scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for a buried rectangular waveguide and a rib waveguide are presented. Solutions are compared favorably with those obtained by the numerical approaches published earlier.     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

光子晶体平面波导与脊波导高效耦合技术的研究

利用一维变周期谐振腔阵列和非线性缓变边界，可以实现光波从脊波导到光子晶体平面波导 （PCW）的高效耦合.基于平面波展开法（PWE）和时域有限差分法（FDTD），深入分析和讨 论了普通脊波导、2D-PCW结构和本征模以及工作模式、缓变边界形状等对耦合效率的影响， 从而得出光波从脊波导到2D-PCW、再返回脊波导的统一图景.指出考虑模式转换和采用缓变 边界条件可以极大提高PCW与脊波导间的耦合效率.对PC-PW边界采用线性和非线性缓变结构 进行了仿真，讨论了边界缓变程度对耦合效率的影响.结果表明，采用模式耦合和PC-PW余弦 缓变边界时的耦合效率在较宽的带宽内超过了95%. 关键词： 光子晶体波导 脊波导 PWE FDTD 耦合边界     

应力对M-Z型InP/InGaAsP-EAM偏振

采用Agilent 81910A光子全参量测试仪,首次实验研究了InP/In1－xGaxAs1－yPy-MQW（Multiple-Quantum-Well,MQW）材料与衬底间因应力而产生的M-Z型光调制器的PDL影响以及由此引起的由差分群时延(Differential Group Delay,DGD)表征的偏振模色散(Polarization Mode Dispersion,PMD).研究结果表明,半导体MQW光调制器的PDL与DGD是一致的.因此在半导体光器件的制作过程中,应尽可能地减小衬底与波导芯层之间的因残存应力的存在造成对光器件的高速性能的不利影响.     

楔形光纤与半导体多量子阱平面光波光路芯片的耦合分析

采用楔形光纤(WSF)实现了与半导体多量子阱(MQW)平面光波光路(PLC)芯片的高效耦合。在多量子阱-平面光波光路前置模斑转换器(SSC)和不加模斑转换器的情况下,用阶梯串联法(SCM)数值模拟并优化设计了楔形光纤-平面光波光路间最佳耦合参量:楔形光纤楔角45°、端面圆柱透镜曲率半径2.5μm、模斑转换器-多量子阱-平面光波光路出射椭圆光斑长半轴3.5μm、纵横比5、楔形光纤-平面光波光路间垂直方向和水平方向无偏移、纵向间距5.5μm。用反向推演法(IDM)实验分析了楔形光纤样品的出射光场,与阶梯串联法(SCM)计算结果相比长轴误差为3.125%,短轴误差为0.8%。建立楔形光纤-平面光波光路-单模光纤(SMF)的耦合实验系统,在1.55μm波长处以单模光纤作为出纤的相同条件下,发现楔形光纤激励入射平面光波光路比单模光纤和锥形透镜光纤(TLF)作为入纤的耦合效率分别提高了24.827 dB和16.22 dB,为多量子阱-平面光波光路芯片尾纤封装技术提供了实验原型。     

梯形截面硅基水平多槽纳米线定向耦合器全矢量分析

定向耦合器是构成各类光子器件的基础元件. 本文采用一种基于电场分量的全矢量有限元法, 分析由梯形截面硅基水平多槽纳米线构成的定向耦合器. 给出了准TE与准TM偶、奇模有效折射率、耦合长度及模场分布, 揭示了其模式的混合特性及模场分布特点. 分析结果表明, 准TE模与准TM模的耦合长度随波导间距的增大均呈指数增长, 其中准TE模的耦合长度对波导侧壁倾角的变化敏感, 而准TM模的耦合长度对槽厚及槽折射率的变化敏感. 恰当选择结构与材料参数, 可实现两偏振态下相同耦合长度, 定向耦合器在偏振无关条件下工作.     

InGaAs/InAlAs多量子阱脊形波导及定向耦合器光波特性准矢量分析

提出了一种基于级数展开的三维准矢量束传播法(SE-QV-BPM)用以分析由InGaAs/InAlAs多量子阱构成的脊形光波导及定向耦合器.结果表明，刻蚀深度相同时，TM模比TE模在水平方向限制强，且TM模的模场在波导角上出现畸变；波导间距相同时，定向耦合器TM波的耦合长度大于TE波的耦合长度，对偏振态敏感.分析获得了浅/深刻脊形光波导承载的准矢量TE/TM基模、定向耦合器承载的TE/TM偶/奇模的模场分布及其有效折射率，模拟了光场在定向耦合器中的传输演变情况.另外，SE-QV-BPM导出矩阵小，计算效率高 关键词： 级数展开 准矢量束传播法 多量子阱 InGaAs/InAlAs