超重核合成进展

介绍了超重核合成的历史和现状,对现有的超重核合成的实验情况和理论模型做了评述,指出了在国内利用现有设备和放射性核束装置开展超重核合成可能的方案。     

超重核合成进展

介绍了超重核合成的历史和现状 ,对现有的超重核合成的实验情况和理论模型做了评述 ,指出了在国内利用现有设备和放射性核束装置开展超重核合成可能的方案     

近代物理研究所超重核研究现状及计划

简单描述了超重核合成的历史与国际现状， 详细地介绍了近代物理研究所已经开展的研究工作及取得的成果， 并对近代物理研究所未来在超重核研究方面的研究计划进行了介绍。 The history and the international status of the super heavy nuclei synthesis are briefly described. The related research work carried out at the Institute of Modern Physics (IMP) has been reviewed. The prospect of the super heavy nuclei research at IMP has been introduced.     

用卢瑟福背散射方法研究陨石中的超重核块

用卢瑟福背散射方法研究了不同陨石中的超重核块.实验结果表明,在这些陨石中,具有Z≈100,A≈1000的超重核块的相对浓度上限为2ppm.     

热熔合反应合成超重核产生截面的同位素依赖性

通过在形成超重核的重离子俘获和熔合过程中引入位垒分布函数的方法对双核模型做了进一步发展. 超重核形成过程中的俘获、熔合和蒸发3个阶段分别采用了半经验的耦合道模型、数值求解主方程和统计蒸发模型的方法来描述. 计算了近年来Dubna小组利用热熔合反应⁴⁸Ca(²⁴³Am, 3n—5n)^288—286115和⁴⁸Ca(²⁴⁸Cm, 3n—5n)^293—291116合成超重新核素的蒸发余核激发函数. 系统分析了⁴⁸Ca轰击锕系元素U,Np,Pu,Am,Cm合成超重核Z=112—116产生截面的同位素依赖性. 给出了合成超重新核素最佳的弹靶组合和入射能量, 即有最大的超重核产生截面. 计算说明, 壳修正能和中子分离能是影响超重核生成截面产生同位素依赖性的主要因素.     

超重核α衰变寿命的理论研究

建立了计算球形核α衰变寿命的新模型——密度依赖的结团模型(DDCM)。在此基础上,通过引入子核的形变自由度,发展了形变的密度依赖的结团模型, 编写了形变的DDCM程序。并系统计算了Z=106—110的超重核α衰变寿命。通过与已有的实验数据的对比分析, 发现理论结果和实验数据符合得很好,验证了DDCM在超重核区域的适用性。We proposed a deformed version of density dependent cluster model (DDCM) by including nuclear deformation of the daughter nucleus. A systematic calculation of α decay half lives of superheavy nuclei (Z=106—110) is carried out by the deformed DDCM. The good agreement between theory and data is obtained. It is shown that the deformed DDCM works well in the superheavy mass region.     

理论预测超重核274-291Cn和266-287Ds的衰变模式

自发裂变和α衰变是影响超重核稳定性的两个主要因素。为了探索270Ds附近的长寿命的超重核,系统地计算了电荷数在104 ≤ Z ≤ 112范围内的α衰变与自发裂变之间的竞争。采用推广的液滴模型和唯象的解析公式计算了α衰变半衰期。基于包括壳效应和同位旋效应的WKB近似方法估算了相同超重核的自发裂变半衰期,进而预测了未知超重核274-276,279Cn与267-269Ds的衰变模式。The stability of superheavy nuclei (SHN) is controlled mainly by spontaneous fission and α decay processes. To investigate whether long lived SHN could really exist around 270Ds, the competition between α decay and spontaneous fission in the region 104 ≤ Z ≤ 112 are studied systematically. The α decay half-lives are investigated by employing a generalized liquid drop model (GLDM) and phenomenological analytical formula. Calculations of spontaneous fission half-lives for the same SHN are carried out based on the Wenzel-Kramers-Brillouin(WKB) approximation with both the shell effect and the isospin effect included. Decay modes are predicted for the unknown nuclei 274-276,279Cn and 267-269Ds.     

超重核的球形和变形壳结构

应用宏观 微观模型系统研究了超重核的形状和结构性质.其中,宏观能是由基于核子密度泛函的连续介质模型计算得到.计算结果很好地再现了超重核的结合能、α衰变能和寿命的实验数据.对单粒子能级的计算和分析表明超重核的壳结构是形变和同位旋相关的.位能曲面的计算结果显示,与其它区域的核相比,超重核的形状不易变化. The structure of superheavy nuclei has been studied by using the macroscopic-microscopic model. The macroscopic energy was calculated with the continuous medium model in which the energy is expressed as a functional of nucleon densities. The deformations and structures of superheavy nuclei were investigated systematically. Calculations reproduce well the available data of experimental α decay energies and half-lifes. The investigation of single-particle levels shows that the shell structure is deformed a...     

在超重核区应用Viola-Seaborg公式研究α衰变寿命

在超重核区(Z≥104)使用文献[7—9]给出的3组参数应用Viola-Seaborg公式计算了α衰变寿命,所得结果与实验值进行比较,发现其结果与实验值相差较大。为此,利用最小二乘法分别在重核区和超重核区重新对参数进行了拟合,得到的计算结果与实验值相比符合得较理想,尤其是由超重核得到的参数的结果非常理想。     

超重核合成时的驱动势与热熔合反应截面

在双核模型框架下,双核系统生成超重复合核的机理是由双核中的弹核的核子全部转移到靶核产生的,而核子转移是由双核系统驱动势确定的.对有的反应道,核子转移与中质比变化路径之间有比较复杂的关系.原则上动力学方程与驱动势都应该是中子和质子的二维显函数.为处理方便,采用与中质比相关的核子转移路径的选择来取驱动势,得到了接近实验值的超重核合成蒸发剩余截面. 关键词： 超重核 熔合反应 驱动势 激发函数     

超重核研究实验方法的历史和现状简介

简单介绍了超重核合成的历史,详细讨论了目前超重核合成最成功的技术路线,包括产生方法、分离手段以及探测技术,并就各种技术的优缺点进行了比较.探讨了目前超重核研究所面临的困难以及介绍了国际上几个主要相关实验室的研究动态,并对超重核研究的发展趋势做了简单展望. The history of the synthesis of the transuranium nuclei is briefly introduced. The most successful techniques currently used for synthesizing super heavy nuclei are surveyed and discussed in detail. The drawbacks and the problems for reaching the stability island of super heavy nuclei with the techniques currently used are discussed. The present status and perspectives of the super heavy nuclei research at different laboratories are also introduced. Finally, a brief prospect on the trends...     

生成超重核的熔合反应中的动力学形变效应

利用包含动力学势能面的双核模型对超重核的生成机制中的一些问题进行了研究。对双核系统的粒子交换势能面进行的计算结果表明,反应过程中原子核动力学形变对于粒子交换势能面的结构有显著的影响。进一步计算了生成超重核的熔合几率,结果显示,原子核的动力学形变导致内熔合位垒升高,进而明显降低了生成超重核的熔合几率。Some aspects in the fusion mechanism for the production of superheavy nuclei are investigated with the dinuclear system model with dynamical potential energy surface. The calculation results about the potential energy surface indicate that the inclusion of nuclear dynamical deformation affects the structure of potential energy surface significantly.The investigation on the fusion probability to synthesize superheavy nuclei indicates that the fusion probability decreases significantly due to the increase of the inner fusion barrier for the inclusion of the nuclear dynamical deformation.     

超重核密度的计算

用Skyrme Hartree Fock模型计算了超重核的密度分布,并讨论了其形状和同位旋相关性。 以292120核为例,计算表明形变对密度分布有相当大的影响。     

超重核合成理论模型简介

介绍并讨论了研究超重核合成的主要理论模型以及近年来在研究重核熔合机制和超重核合成理论模型方面的进展。 The theoretical models for investigating the fusion mechanism of heavy nucleus collisions and calculating the formation cross sections of superheavy nuclei have been introduced. The recent development and the present status for understanding the fusion mechanism of heavy nucleus collisions have been discussed.     

超重核的四面体对称性(英文)

基于反射不对称壳模型的投影位能面计算预言原子核310126 是继208Pb 之后的双幻核,其基态呈现出四面体形状。四面体对称性驱动的量子效应可以使基态的结合能,相较球形而言增加达13 MeV,这反映了在最重核的计算中,考虑四面体自由度的重要性。计算结果还表明,四面体对称性驱动的量子效应能够明显地增加裂变位垒,从而导致超重核合成几率的增加。     

形变区超重核的合成和衰变研究

理论预言超重核²⁷⁰Hs是形变双幻数核. 利用二参量Smoluchowski方程计算了不同弹靶组合下合成^266—270Hs反应的形成截面, 提出了最佳弹靶组合和轰击能量, 预言了α衰变半衰期.     

原子核的大质量转移反应和丰中子超重核的产生(英文)

迄今为止,人们合成的超重核都是缺中子的,无论是熔合-裂变反应还是碎化过程都无法使产物达到周期表的“东北区域”。而重核之间(如U核之间) 的近垒大质量转移反应则可能是目前生成丰中子超重核和达到未知丰中子重核区域的唯一途径。在改进的量子分子动力学(ImQMD) 模型结合统计模型框架内,研究了U+U等反应体系的大质量转移反应,计算了反应产生的初生态碎片的质量和电荷分布,并成功再现了产物的终态质量和电荷分布。通过比较3 个反应136Xe+248Cm,48Ca+248Cm和238U+248Cm 产生的106号元素的截面大小,揭示了U+U等重核大质量转移反应对产生丰中子超重核是非常有利的。For elements with Z > 100 only neutron deficient isotopes have been synthesized so far. The “northeast area” of the nuclear map can be reached neither in fusion-fission reactions nor in fragmentation processes.The large mass transfer reactions in near barrier collisions of heavy (U-like) ions seem to be the only reaction mechanism allowing us to produce neutron rich heavy nuclei including those located at the superheavy(SH) island of stability and unexplored area of heavy neutron-rich nuclides. This study is extremely important for nuclear astrophysical investigations and, in particular, for the understanding of the r process. In this paper within the Improved Quantum Molecular Dynamics (ImQMD) model combining with the statistical-evaporation model, the large mass transfer reactions, like 238U+238U have been studied. The charge and mass distributions of transiently formed primary fragments are investigated within the ImQMD model and de-excitation processes of those primary fragments are described by the statistical decay model. The mass distribution of the final products in 238U+238U collisions is obtained and compared with the recent experimental data. Through compared the formation cross sections of transfermium element 106 by three reactions of 136Xe+248Cm, 48Ca+248Cm and 238U+248Cm, it is explored that the large mass transfer reactions, like U+U are very benefit for the production of SH nuclei.     

不同理论模型预言合成超重核Z=119~122研究进展

通过双核系统模型与其他模型对$Z\leqslant$118元素的计算结果与实验数据的比较，证明了不同模型预测超重核的产生截面是可靠的。对比分析了不同模型对Z=119和Z=120超重核的预言结果，我们认为合成超重核Z=119和Z=120的最佳弹靶组合分别为反应$^{48}{\rm{Ca}} + ^{{\rm{252}}}{\rm{Es}}$和$^{40}{\rm{Ca}} + ^{{\rm{257}}}{\rm{Fm}}$，并且Z=119新核素很有可能会先于Z=120新核素在实验上被合成。由于实验上Z>100锕系靶的限制，人们正尝试寻找比48Ca更重的弹核来合成超重核Z=121和Z=122，超重核Z=121可以通过反应V+Cf来合成，而超重核Z=122的产生截面已经非常小，要求将来在实验上提高探测及鉴别技术。希望本文的讨论可以在将来为实验及理论核物理工作者们提供一些参考。     

超重核合成中的靶核形变效应

利用额外推力模型研究了48Ca+238U超重核合成过程中的靶核形变效应.计算表明,在近垒和垒下能区,靶核形变使超重核合成截面明显增强.对于48Ca+238U反应,由于靶核形变蒸发残余截面增大了几倍.同时与球形靶核相比,形变靶核时蒸发残余激发函数的峰位移向较低能量.Effects of target deformation on the synthesis of superheavy nucleus~(283)112 are investigated in the framework of extra-push model. Our results show that the cross sections of the 3n evaporation residue in the~(48)Ca+~(238)U reaction for the case of β_2=0.275 are several times larger than those of β_2=0. Meanwhile, the peak position of ER excitation function in the case of deformed target is shifted to the lower energy as compared to the one of spherical target.     

原子核结构的相对论平均场描述

简要评述近几年相对论平均场理论的发展及其在核结构研究中取得的部分进展. 主要内容包括中子晕, 质子晕, 巨晕, 激发态晕等奇特核现象, 超重核结构, 超核结构以及原子核的赝自旋对称性和反核子谱的自旋对称性等.