两幅差分干涉诊断铝丝阵Z箍缩等离子体

研制了两幅激光差分干涉诊断系统,可在一次实验中获得两幅间隔3～12 ns的高分辨干涉图像。该系统采用分光延时装置产生两束有一定夹角和时间间隔的探测激光脉冲,采用特殊的偏轴4f传像系统在同一块CCD的不同区域产生两幅干涉图像。应用该系统开展了铝丝阵Z箍缩激光干涉诊断实验,获得了丝膨胀和消融、晕等离子体产生和发展、以及先驱等离子体产生和发展等Z箍缩演化过程的实验图像,并给出了Z箍缩早期阶段的等离子体电子密度分布。     

Z-pinch内爆等离子体时空分辨诊断技术

 为了深入认识和理解Z-pinch物理机制并对物理实验进行优化设计，需要研究内爆等离子体及其辐射的时空分布特性诊断技术，建立诊断装置与设备，通过实验研究等离子体内爆时间过程及其空间分布特性，利用所获得的实验诊断数据校核数值模拟程序。简要介绍近几年开展的X光空间积分功率谱测量、X光时间积分针孔照相、X光时分幅针孔照相、X光时间分辨1维空间分布、紫外探针阴影照相等时空分辨诊断技术研究工作，并给出在1~3 MA电流驱动装置上进行的喷气和丝阵内爆实验中获得的部分时空分辨诊断结果，包括辐射功率、拉链速度、内爆速度、收缩比等。     

用于Z-pinch诊断的266nm激光探针分幅阴影成像系统

采用Nd-YAG激光器的四倍频激光(266nm)设计了激光探针分幅阴影成像系统，该系统具有时间分辨率和收光效率高，测量范围大，可有效屏蔽可见光干扰的优点，在钨丝阵实验中成功获得晚期内爆等离子体的分布图像.对系统结构和性能参数做了介绍，对测量结果进行了讨论. 关键词： Z-pinch 激光探针 等离子体分布 分幅成像     

利用x射线激光干涉诊断等离子体电子密度

x射线激光探针干涉方法是诊断高温高密度激光等离子体电子密度等信息的重要工具.利用神光Ⅱ装置输出激光驱动的类镍-银x射线激光作为探针，成功地进行了马赫-曾德尔干涉法诊断实验，获得了清晰的包含等离子体信息的动态干涉条纹图像，并据此给出了待测C8H8等离子体临界面附近电子密度的空间分布. 关键词： 等离子体电子密度诊断 x射线激光 马赫-曾德尔干涉仪     

单发次测量软X射线多层膜分束镜光学特性实验

用X射线激光作为探针，探测激光等离子体临界面附近的电子密度，对惯性约束聚变(ICF)的研究具有很大的应用价值。2003年11月，在“神光”Ⅱ装置上进行的X射线激光干涉法诊断等离子体电子密度实验研究取得了重大进展：利用类镍-银X射线激光作为探针，采用分束镜分光的马赫-贞德尔干涉仪在国内首次拍摄到清晰的动态干涉图。     

激光应用 其他应用

TL653 2005042666 利用X射线激光干涉诊断等离子体电子密度=Experi- mental diagnose of plasma electron density by interferome- try using an X-ray laser as probe[刊,中]／王琛(上海激光等离子体研究所,上海(201800)),王伟…／／物理学报．- 2005,54(1),-202-205 X射线激光探针干涉方法是诊断高温高密度激光等离子体电子密度等信息的重要工具。利用神光Ⅱ装置输出激光驱动的类镍-银X射线激光作为探针,成功地进行了马赫-曾德尔干涉法诊断实验,获得了清晰的包含等离     

对飞秒激光等离子体相互作用中横向箍缩的观察

用飞秒激光的Normaski偏振干涉法,对超短激光脉冲产生的等离子体膨胀过程进行了光学诊断,得到了有时间分辨的等离子体干涉图.发现飞秒激光等离子体在靶面平行的方向上出现了箍缩,使等离子体膨胀呈jet结构,这种箍缩现象是由自生磁场对等离子体的约束所造成. 关键词： 飞秒激光等离子体 光学诊断 电子密度分布     

利用X射线激光进行激光等离子体射流的诊断

射流是激光惯性约束聚变(ICF)、天体物理学等领域中一种普遍存在的非线性现象.在实验室对射流现象进行模拟、诊断等方面的研究对于理解ICF、天体物理中的相关现象具有重要参考价值.采用纳秒激光辐照特殊形状的圆孔靶产生等离子体射流,利用波长为13.9nm的X射线激光作为光源对特定时刻的射流进行阴影成像,获得了清晰的射流阴影图像,与理论模拟结果定性一致. 关键词： 射流 X射线激光 等离子体诊断     

软X射线双频光栅干涉诊断等离子体

针对高温稠密激光等离子体临界密度附近电子密度的诊断需求,发展了基于软X射线激光的软X射线双频光栅干涉诊断技术。利用波长13.9nm的类镍银软X射线激光作为探针,掠入射式的双频光栅作为分光干涉元件,对激光辐照金平面靶产生的等离子体进行诊断尝试。实验获得了清晰的干涉条纹图像,充分表明该技术的实用性。但结果中存在靶面不清晰等问题,为此,提出了初步的解决方案。     

门控MCP软X射线皮秒多分幅相机

 介绍了用于等离子体诊断的门控MCP软X射线皮秒多分幅相机结构、工作原理、性能指标、关键技术以及在激光等离子体诊断中获得的典型结果。     

Landau–Zener–Stückelberg interferometry

A transition between energy levels at an avoided crossing is known as a Landau–Zener transition. When a two-level system (TLS) is subject to periodic driving with sufficiently large amplitude, a sequence of transitions occurs. The phase accumulated between transitions (commonly known as the Stückelberg phase) may result in constructive or destructive interference. Accordingly, the physical observables of the system exhibit periodic dependence on the various system parameters. This phenomenon is often referred to as Landau–Zener–Stückelberg (LZS) interferometry. Phenomena related to LZS interferometry occur in a variety of physical systems. In particular, recent experiments on LZS interferometry in superconducting TLSs (qubits) have demonstrated the potential for using this kind of interferometry as an effective tool for obtaining the parameters characterizing the TLS as well as its interaction with the control fields and with the environment. Furthermore, strong driving could allow for fast and reliable control of the quantum system. Here we review recent experimental results on LZS interferometry, and we present related theory.     

Tunable-optical-filter-based white-light interferometry for sensing

We describe tunable-optical-filter-based white-light interferometry for sensor interrogation. By introducing a tunable optical filter into a white-light interferometry system, one can interrogate an interferometer with either quadrature demodulation or spectral-domain detection at low cost. To demonstrate the feasibility of effectively demodulating various types of interferometric sensor, experiments have been performed using an extrinsic Fabry-Perot tunable filter to interrogate two extrinsic Fabry-Perot interferometric temperature sensors and a diaphragm-based pressure sensor.     

Temporal heterodyne shearing speckle pattern interferometry

Shearing speckle pattern interferometry is a full-field speckle interferometric technique used to determine surface displacement derivatives. In this paper, a new measurement system of real-time heterodyne shearography interferometry is presented. This system combined with heterodyne measurement, shearography interferometry and time domain signal processing technology can dynamically detect the out-of-plane displacement gradient. The principles and system arrangement are described. Using the Jones matrix, the mathematical expression of light intensity distribution passing through this system is deduced. A preliminary experiment was performed to demonstrate the performance of this new device, and simulations were conducted using the finite element method. Comparison of results shows that quantitative measurement of the displacement derivative has been achieved.     

Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.     

Stroboscopic digital speckle pattern interferometry for vibration analysis of microsystem

In this paper, vibration measurement and analysis of microsystems, such as micro-electro-mechanical systems (MEMS) by using stroboscopic digital speckle pattern interferometry (DSPI) is presented. Because of the speckle interferometry, the technique is suited for samples which have a rough surface or whose surfaces can be sprayed into a scattering surface. A laser speckle microinterferometer incorporated with optoelectronic devices for a stroboscopic illumination and a synchronization of the signals between excitation and stroboscopic illumination is described and demonstrated. The system can measure both out-of-plane and in-plane displacement under either a static or dynamic loading. The fundamental is explained and some applications are demonstrated.     

Simultaneous 2D in-plane deformation measurement using electronic speckle pattern interferometry with double phase modulations

Electronic speckle pattern interferometry(ESPI) and digital speckle pattern interferometry are wellestablished non-contact measurement methods. They have been widely used to carry out precise deformation mapping. However, the simultaneous two-dimensional(2D) or three-dimensional(3D) deformation measurements using ESPI with phase shifting usually involve complicated and slow equipment. In this Letter, we solve these issues by proposing a modified ESPI system based on double phase modulations with only one laser and one camera. In-plane normal and shear strains are obtained with good quality. This system can also be developed to measure 3D deformation, and it has the potential to carry out faster measurements with a highspeed camera.     

数字散斑干涉三维变形测量技术研究进展

三维变形可以转换为应力/应变分布，是材料性能测试和结构可靠性分析的关键参数。在众多三维变形测量技术中，数字散斑干涉技术可以高精度地测量三维变形信息，在航空航天、汽车、先进制造、土木工程和生物医学等行业发挥着十分重要的作用。从散斑干涉基本原理出发，详细介绍了几类三维变形散斑干涉测量技术，并分析比较各类方法的优缺点；同时介绍了散斑干涉三维变形测量技术的国内外研究进展和最新应用；最后展望了散斑干涉三维变形测量技术在动态同步测量、测量系统简化以及应用范围扩宽等方面的发展趋势。     

Investigation of glass panels thickness profile by all-fiber digital heterodyne interferometry

All-fiber digital heterodyne interferometry is a laser metrology technique employing pseudo-random codes phase modulated onto an optical carrier signal. In this heterodyne interferometer system, the optical signal includes signal reflected and transmitted from the sample, respectively. Compared with the conventional heterodyne interferometry, this enhanced optical system has much higher measurement sensitivity, and can distinguish the signal which reflected from the front and the rear surface of the sample. Analysis and simulation for the digital heterodyne interferometry are presented. It takes approximately 4 s to scan the whole surface with the diameter of 300 mm. The thickness profile of the sample is obtained in the experiment. The discussion about the experiment is given finally.     

基于复合干涉的光纤低相干干涉传感系统研究

研究一种能够进行远程及绝对测量的光纤低相干干涉传感系统。该系统包含两个光纤干涉仪,其中一个光纤干涉仪置于被测场中感应被测量的变化,可实现远程测量;另一个光纤干涉仪解调被测量的值。运用波分复用技术,使用于解调的光纤干涉仪同时工作于低相干干涉和高相干干涉状态。用低相干干涉信号决定被测量的幅值,对被测量实现绝对测量,并使测量量程不受波长限制;同时,用高相干干涉信号对被测量进行高精度的测量。系统的测量量程为6mm,测量分辨率小于1nm,位移实验结果的线性相关系数R为0.99。