Ab initio study on phase transition and magnetism of BiFeO3 under pressure

In this paper the first-principles calculations within local spin density approximation (LSDA)+U show that BiFeO3 experiences a mixed phase state with P4mm structure being the intermediate phase before the pressure of phase transition is reached. The critical pressure for the insulator-metal transition (IMT) is found to be about 50 GPa. A pressure induced crossover of high-spin states and low-spin states is observed close to the IMT pressure in R3c structure. The LSDA+U calculations account well for the mechanism of the IMT and crossover of spin states predicted in recent experiment (Ref.[1]).     

Spin polarization effect of Ni2 molecule

The density functional theory （DFT） method （b3p86） of Gaussian 03 is used to optimize the structure of the Ni2 molecule. The result shows that the ground state for the Ni2 molecule is a 5-multiple state, symbolizing a spin polarization effect existing in the Ni2 molecule, a transition metal molecule, but no spin pollution is found because the wavefunction of the ground state does not mingle with wavefunctions of higher-energy states. So the ground state for Ni2 molecule, which is a 5-multiple state, is indicative of spin polarization effect of the Ni2 molecule, that is, there exist 4 parallel spin electrons in Ni2 molecule. The number of non-conjugated electrons is greatest. These electrons occupy different spatial orbitals so that the energy of the Ni2 molecule is minimized. It can be concluded that the effect of parallel spin in the Ni2 molecule is larger than that of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters of the ground state and other states of the Ni2 molecule are derived. The dissociation energy De for the ground state of the Ni2 molecule is 1.835 eV, equilibrium bond length Re is 0.2243 nm, vibration frequency we is 262.35 cm^-1. Its force constants f2, f3 and f4 are 1.1901 aJ.nm^-2, -5.8723 aJ.nm^-3, and 21.2505 aJ.nm^-4 respectively. The other spectroscopic data for the ground state of the Ni2 molecule ωeχe, Be and αe are 1.6315cm 2, 0.1141 cm^-1, and 8.0145× 10^-4 cm^-1 respectively.     

Spin polarization effect for Mn2 molecule

The density functional theory method （DFT） （b3p86） of Gaussian 03 has been used to optimize the structure of the Mn2 molecule. The result shows that the ground state of the Mn2 molecule is an 11-multiple state, indicating a spin polarization effect in the Mn2 molecule, a transition metal element molecule. Meanwhile, we have not found any spin pollution because the wavefunction of the ground state does not mingle with wavefunctions of higher-energy states. So the ground state for Mn2 molecule being of an 11-multiple state is the indicative of spin polarization effect of the Mn2 molecule among those in the transition metal elements： that is, there are 10 parallel spin electrons in a Mn2 molecule. The number of non-conjugated electrons is the greatest. These electrons occupy different spacious orbitals so that the energy of the Mn2 molecule is minimized. It can be concluded that the effect of parallel spin in the Mn2 molecule is larger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters for the ground state and other states of the Mn2 molecule are derived. The dissociation energy De for the ground state of the Mn2 molecule is 1.4477 eV, equilibrium bond length Re is 0.2506 nm, vibration frequency ωe is 211.51 cm^-1. Its force constants f2, f3, and f4 are 0.7240 aJ·nm-2, -3.35574 aJ·nm^-3, 11.4813 aJ·nm^-4 respectively. The other spectroscopic data for the ground state of the Mn2 molecule ωeχe, Be, αe are 1.5301 cm^-1, 0.0978 cm^-1, 7.7825×10^-4 cm^-1 respectively.     

Ab initio prediction on ferrotoroidic and electronic properties of olivine Li4MnFeCoNiP4O16

First-principles calculations predict that olivine Li4MnFeCoNiP4O16 has a large toroidal moment and ferrimagnetic configuration with a magnetic moment of 1.99μB per formula unit. Density functional theory plus U (DFT+U) shows an indirect band gap of 0.65 eV in this hypothetical material. The band gap is not simply related to the electronic conductivity when it is used as cathode material in rechargeable Li-ion batteries. Based on the orbital-resolved density of states for the transition-metal ions in the hypothetical material, Co, Ni and Mn are in the high-spin configuration while Fe is in the low-spin configuration, which leads to a large resulting toroidal moment deriving from the Co and Ni ions. The spin configuration of the transition-metal ions in the system breaks the space-and time-inversion symmetry and leads to the magnetoelectric property simultaneously. The ferrotoroidic domain, the fourth form of ferroic, is observed in this new material, as in the case of LiCoPO4 reported recently.     

Spin polarization effect for Fe2 molecule

This paper uses the density functional theory （DFT）（B3p86） of Gaussian03 to optimize the structure of Fe2 molecule. The result shows that the ground state for Fe2 molecule is a 9-multiple state, which shows spin polarization effect of Fe2 molecule of transition metal elements for the first time. Meanwhile, we have not found any spin pollution because the wavefunction of the ground state does not mingle with wavefunctions with higher energy states. So, that the ground state for Fe2 molecule is a 9-multiple state is indicative of the spin polarization effect of Fe2 molecule of transition metal elements. That is, there exist 8 parallel spin electrons. The non-conjugated electron is greatest in number. These electrons occupy different spacious tracks, so that the energy of the Fe2 molecule is minimized. It can be concluded that the effect of parallel spin of the Fe2 molecule is laFger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell Sorbie potential functions with the parameters for the ground state and other states of Fe2 molecule are derived. Dissociation energy De for the ground state of Fe2 molecule is 2.8586ev, equilibrium bond length Re is 0.2124nm, vibration frequency we is 336.38 cm^-1. Its force constants f2, f3, and f4 are 1.8615aJ.nm^-2, -8.6704aJ.nm^-3, 29.1676aj.nm^-4 respectively. The other spectroscopic data for the ground state of Fe2 molecule weXe, Be, αe are 1.5461 cm^-1, 0.1339cm^-1, 7.3428× 10^-4 cm^-1 respectively.     

梯形化合物NaV2O4F电子结构的第一性原理研究

采用基于密度泛函理论(DFT)的第一性原理赝势平面波方法, 通过自旋极化的广义梯度近似(GGA)电子结构计算对梯形化合物NaV₂O₄F进行了研究. 考虑了四种假想的自旋有序态,计算结果表明该化合物的磁基态具有二维反铁磁(AFM)结构, 即沿梯阶和梯腿方向都表现为AFM作用. 能带结构显示NaV₂O₄F为绝缘体材料, 带隙约为1.0eV. 方锥体中的晶体场劈裂使得VO₄F方锥体中的 V^{4+ 关键词： 2O₄F')" href="#">NaV₂O₄F 梯形化合物 第一性原理计算 电子结构}     

Ferroelectric properties of bilayer structured Pb(Zr0.52Ti0.48)O3/SrBi2Ta2O9 (PZT/SBT) thin films on Pt/TiO2/SiO2/Si substrates

Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films with large remanent polarization and SrBi₂Ta₂O₉ (SBT) thin films with excellent fatigue-resisting characteristic have been widely studied for non-volatile random access memories, respectively. To combine these two advantages_, bilayered Pb(Zr_0.52Ti_0.48)O₃/SrBi₂Ta₂O₉ (PZT/SBT) thin films were fabricated on Pt/TiO₂/SiO₂/Si substrates by chemical solution deposition method. X-ray diffraction patterns revealed that the diffraction peaks of PZT/SBT thin films were completely composed of PZT and SBT, and no other secondary phase was observed. The electrical properties of the bilayered structure PZT/SBT films have been investigated in comparison with pure PZT and SBT films. PZT/SBT bilayered thin films showed larger remanent polarization (2P_r) of 18.37 μC/cm² than pure SBT and less polarization fatigue up to 1 × 10⁹ switching cycles than pure PZT. These results indicated that this bilayered structure of PZT/SBT is a promising material combination for ferroelectric memory applications.     

溶胶-凝胶ZrO2-TiO2高折射率光学膜层的抗激光损伤性能研究

采用溶胶-凝胶方法制备了ZrO₂-TiO₂(Ti含量为0—100mol%)高折射率光学薄膜. 借助激光动态光散射技术研究溶胶微结构. 采用傅里叶变换红外光谱、原子力显微镜、薄膜光学常数分析仪、漫反射吸收光谱及强激光辐照实验，对膜层的结构、光学性能及抗激光损伤性能进行了系统表征. 结果显示，溶胶-凝胶工艺可以在部分牺牲折射率的情况下，使膜层的抗激光损伤性能得到大幅度提升. 随Ti含量从0mol%增加至100mol%，膜层的平均损伤阈值呈下降趋势，当Ti含量从0mol%增加至60mol%时，平均损伤阈值从57.1J/cm²下降到21.1J/cm²(辐照激光波长为1053nm，脉冲宽度为10ns，“R/1”测试模式)，当Ti含量从60mol%增加至100mol%时，平均损伤阈值变化很小. 综合溶胶微结构、膜层光学性能和损伤实验结果可以推断，强激光诱导多光子吸收是引起膜层损伤的主要原因. 不同配比的复合膜之间光学带隙的显著差异导致相同辐照激光情况下多光子吸收的概率发生变化，从而导致损伤阈值的规律性变化. 关键词： 2-TiO₂薄膜')" href="#">ZrO₂-TiO₂薄膜 溶胶-凝胶 激光诱导损伤 光学带隙     

溶胶-凝胶法制备Sr2Bi4Ti5O18薄膜及其铁电性能研究

采用溶胶-凝胶法,在氧气氛中和层层晶化的工艺条件下,成功地制备了沉积在Pt/Ti/SiO₂/Si(100)衬底上的铁电性能优良的Sr₂Bi₄Ti₅O₁₈ (SBTi)薄膜,并研究了SBTi薄膜的微结构、表面形貌、铁电性能和疲劳特性.研究表明：薄膜具有单一的层状钙钛矿结构，且为随机取向；薄膜表面光滑，无裂纹，厚度约为725nm；铁电性能测试显示较饱和、方形的电滞回线，当外电场强度为275kV/cm时 关键词： 溶胶-凝胶法 铁电薄膜 2Bi₄Ti₅O₁₈')" href="#">Sr₂Bi₄Ti₅O₁₈     

Density functional theory study of NO2-sensing mechanisms of pure and Ti-dopedWO3 （002） surfaces

Density functional theory (DFT) calculations are employed to explore the NO₂-sensing mechanisms of pure and Ti-doped WO₃ (002) surfaces. When Ti is doped into the WO₃ surface, two substitution models are considered: substitution of Ti for W_6c and substitution of Ti for W_5c. The results reveal that substitution of Ti for 5-fold W forms a stable doping structure, and doping induces some new electronic states in the band gap, which may lead to changes in the surface properties. Four top adsorption models of NO₂ on pure and Ti-doped WO₃ (002) surfaces are investigated: adsorptions on 5-fold W (Ti), on 6-fold W, on bridging oxygen, and on plane oxygen. The most stable and likely NO₂ adsorption structures are both N-end oriented to the surface bridge oxygen O_1c site. By comparing the adsorption energy and the electronic population, it is found that Ti doping can enhance the adsorption of NO₂, which theoretically proves the experimental observation that Ti doping can greatly increase the WO₃ gas sensor sensitivity to NO₂ gas.     

Co和稳定元素对Nd3(Fe,Co,M)29(M=Ti,V,Cr) 化合物结构和磁性的影响

利用x射线衍射和磁测量研究了不同稳定元素Co以及Ti,V和Cr替代对Nd₃Fe_29-x-yCo_xM_y(M=Ti,V,Cr)化合物结构和磁性的影响.研究发现:每一个稳定元素都有一替代量极限,在此极限以内所有化合物均为Nd₃(Fe,Ti)₂₉型结构,A2/m空间群.不同稳定元素的溶解极限不同.Co的替代量与稳定元素有关,当以Cr作为稳定元素时,Cr的替代量随着Co含量的提高而提高 关键词： 3(Fe')" href="#">Nd₃(Fe Co 29')" href="#">M)₂₉ 结构 磁性     

La0.3Sr0.7TiO3模板层对Pb(Zr0.5Ti0.5)O3薄膜的铁电性能增强效应的研究

通过sol-gel法在Si (111) 基片上分别制备了LaNiO₃(LNO)底电极和LaNiO₃/La_0.3Sr_0.7TiO₃ (LNO/LSTO)底电极.然后采用sol-gel 方法，在两种衬底上分别制备了Pb (Zr_0.5Ti_0.5)O₃ (PZT)铁电薄膜.XRD分析表明，两种PZT薄膜均具有钙钛矿结构，且在LNO底电极上的PZT薄膜呈(100) 择优取向，而在LNO/LSTO底电极上的PZT薄膜呈随机取向.铁电性能测试表明，相对LNO衬底上制备的PZT薄膜，在LNO/LSTO底电极上制备的PZT薄膜的剩余极化强度得到了有效的增强，同时矫顽场也增大.介电常数和漏电流的测试表明，LNO/LSTO底电极上制备的PZT薄膜具有大的介电常数和漏电流. 关键词： PZT薄膜 铁电性 漏电流 0.3Sr_0.7TiO₃')" href="#">La_0.3Sr_0.7TiO₃     

Effect of hydrogen-doping on bonding properties of Ti3SiC2

Using the first principles method based on the density functional theory, we investigated the effect of hydrogen-doping on bonding properties of Ti₃SiC₂. The formation energies of hydrogen interstitials in three possible positions were calculated. The results show that hydrogen favors residing near the (0 0 1) Si plane. In these positions, hydrogen is hybridized most with 1s states of lattice atoms (Si and C), instead of Ti. The presence of hydrogen does not substantially influence the bonding nature of Ti₃SiC₂; chemical bonding is characterized by the hybridizations of Ti d-Si p and Ti d-C p states, and yields high strength. This is contrary to hydrogen-doping in transition metals, where the electron of hydrogen fills in the d bands of the metals and, as a consequence, decreases the cohesive strength of the lattice.     

C2H2 Overtones Near 12300 cm-1 Revisited with a Very Sensitive Cavity Ring-down Spectrometer

利用单模连续的钛宝石激光器, 构建了一台光腔衰荡光谱仪, 其可探测的最小吸收可达1.8×10^-10/cm. 该光谱仪被用来记录C₂H₂分子在12240～12350 cm^-1的泛频光谱. 与在同一波段测量的已报到的CRDS和激光腔内吸收光谱仪结果比较,本测量同时具有更好的灵敏度和精度. 由此,获得了乙炔分子在12290.12、12311.82和12350.61 cm^-1附近高泛频谱带更准确的振转参数     

强耦合磁失措自旋冰系统Dy2Ti2O7单晶生长和基本磁性质测量

利用红外光源浮区法生长出大尺寸、高质量的磁失措自旋冰化合物Dy₂Ti₂O₇单晶体.X射线衍射实验证实晶体具有面心立方结构，空间群为Fd3m，晶胞参数a＝1.0112(2) nm，［111］和［400］方向X射线衍射摇摆曲线半高宽分别仅为0.07°和0.05°.直流磁化率与温度关系测量给出晶体的Van Vleck顺磁因子为2.46×10^-5 m³/mol，有效磁矩μ_eff＝10.24(4)μ_B，Cure-Weiss温度Θ_CW＝1.1 K，揭示Dy₂Ti₂O₇具有弱的铁磁性.对磁性起源的综合分析表明，该自旋冰晶体磁性质主要来源于磁偶极相互作用，且相关最近邻长程偶极相互作用能量标度D_nn＝3.00 K. 关键词： 2Ti₂O₇')" href="#">Dy₂Ti₂O₇ 浮区法晶体生长 关联电子系统 自旋冰     

Pb2，PdPb2分子的势能函数

采用Gaussian 98程序,运用B3LYP方法,对Pd和Pb原子采用收缩价基组LANL2DZ,对Pb₂和PdPb₂分子的微观结构进行了理论计算. 由于Pb₂分子离解后一个Pb原子处于基态,另一个Pb原子处于激发态,采用最小二乘法拟合Pb₂分子的势能函数,选用的函数形式为Murrell-Sorbie势能函数加上开关函数. 使用多体展式理论导出了势函数中的参数进而给出PdPb₂分子基态势函数的解析表达式,其势能面准确地复现了PdPb₂分子的两个稳定构型(C_2V和C_∞v)及其能量关系. 关键词： 2')" href="#">Pb₂ 2')" href="#">PdPb₂ 势能函数     

H3PAuPh与(H3PAu)2(1,4-C6H4)2光谱性质的密度泛函研究

用密度泛函(DFT)方法优化了配合物H₃PAuPh(a),(H₃PAu)₂(1,4-C₆H₄)₂(b)的基态的几何结构,并用含时密度泛函方法计算了它们的吸收光谱.结果表明配合物a与 b的最低能量吸收谱线的波长分别为257.5 nm和307.6 nm,皆具有C(2p)→Au(6p)电荷转移参与下的p_π 关键词： 激发态 光谱 密度泛函 3')" href="#">AuPH₃     

Density functional analysis of the magnetic structures of Sr2MGe2O7 (M=Mn,Co)

To examine the difference between the magnetic structures of Sr₂MGe₂O₇ (M=Mn, Co), we evaluated their spin exchange interactions by performing energy-mapping analysis based on density functional theory calculations. The calculated intra- and inter-layer spin exchanges correctly predict the G-type and C-type antiferromagnetic structures of Sr₂MnGe₂O₇ and Sr₂CoGe₂O₇, respectively, and the Curie–Weiss temperatures estimated from these spin exchanges are also in good agreement with the experiment. The ∥c and ⊥c orientations of the spins in the ordered magnetic structures of Sr₂MnGe₂O₇ and Sr₂CoGe₂O₇, respectively, were also examined by considering spin–orbit coupling.     

The use of direct recoil spectrometry (DRS) for the study of water vapor interactions on polycrystalline metallic surfaces—the H2O/U and H2O/Ti systems

Using direct recoil spectrometry (DRS), the shadowing of surface H atoms by neighboring O atoms can differentiate between full and partial dissociation routes of water molecules on the surface as well as point to the geometrical arrangements of hydroxyl surface groups. The H₂O/U and H₂O/Ti systems were compared. It has been found that different mechanisms control the water-surface interactions in these systems.For the H₂O/U system, a simple direct-collision (Langmuir-type) dissociative chemisorption controls the process. Two consecutive stages were identified: (i) below ∼70% monolayer coverage, a complete dissociation of water into oxygen ion and two H atoms, which chemisorb on the remaining unreacted metallic surface and (ii) above about 70% of a full layer coverage, three dimensional oxide islands start to form, causing partial dissociation of water and the formation of surface hydroxyls.For the H₂O/Ti system, a more complicated mechanism, which involves a precursor state, seems to control the process. In that case, two concurrent routes act simultaneously. In addition to the simple direct-collision mechanism, water precursor clusters (bound by hydrogen bonds), which partly dissociate, result in chemisorbed tilted hydroxyl clusters (even at low-coverage). The relative contributions of the precursor route and the direct-collision route are pressure dependent, with the former being dominant at higher exposure pressures.     

Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics

We describe the structural properties and electrical characteristics of thin thulium oxide (Tm₂O₃) and thulium titanium oxide (Tm₂Ti₂O₇) as gate dielectrics deposited on silicon substrates through reactive sputtering. The structural and morphological features of these films were explored by X-ray diffraction, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and atomic force microscopy, measurements. It is found that the Tm₂Ti₂O₇ film annealed at 800 °C exhibited a thinner capacitance equivalent thickness of 19.8 Å, a lower interface trap density of 8.37 × 10¹¹ eV⁻¹ cm⁻², and a smaller hysteresis voltage of ∼4 mV than the other conditions. We attribute this behavior to the Ti incorporated into the Tm₂O₃ film improving the interfacial layer and the surface roughness. This film also shows negligible degrees of charge trapping at high electric field stress.