SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Comparison of the effect of PLT and PZT buffer layers on PZT thin films for ferroelectric materials applications

In order to study the effect of different buffer layers on the Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films, 10-nm thick (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) and Pb(Zr_0.52Ti_0.48)O₃ buffer layers have been deposited on the Pt(1 1 1)/Ti/SiO₂/Si substrates by pulsed laser deposition, respectively. The top buffer layers were also deposited on PZT thin films with the same thickness of the seed layers in order to enhance the fatigue characteristics of PZT thin films. We compared the results of dielectric constant, hysteresis loops and fatigue resistance characteristics. It was found that the dielectric properties of PZT thin films with PLT buffer layers were improved by comparing with PZT thin films with PZT buffer layers. The polarization characteristics of PZT thin films with PLT buffer layers were observed to be superior to those of PZT thin films using PZT buffer layers. The remanent polarization of PZT thin films showed 36.3 μC/cm² and 2.6 μC/cm² each in the case of use PLT and PZT buffer layers. For the switching polarization endurance analysis, PZT thin films with PLT buffer layers showed more excellent result than that of PZT thin films with PZT buffer layers.     

Effects of vanadium doping on structure and electrical properties of SrBi4Ti4O15 thin films

The effects of vanadium(V) doping into SrBi₄Ti₄O₁₅ (SBTi) thin films on the structure, ferroelectric, leakage current, dielectric, and fatigue properties have been studied. X-ray diffraction result showed that the crystal structure of the SBTi thin films with and without vanadium is the same. Enhanced ferroelectricity was observed in the V-doped SrBi₄Ti₄O₁₅ (SrBi_4−x/3Ti_4−xV_xO₁₅, SBTiV-x (x = 0.03, 0.06, and 0.09)) thin films compared to the pure SrBi₄Ti₄O₁₅ thin film. The values of remnant polarization (2P_r) and coercive field (2E_c) of the SBTiV-0.09 thin film capacitor were 40.9 μC/cm² and 105.6 kV/cm at an applied electric field of 187.5 kV/cm, respectively. The 2P_r value is over five times larger than that of the pure SBTi thin film capacitor. At 100 kHz, the values of dielectric constant and dielectric loss were 449 and 0.04, and 214 and 0.06 for the SBTiV-0.09 and the pure SBTi thin film capacitors, respectively. The leakage current density of the SBTiV-0.09 thin film capacitor measured at 100 kV/cm was 6.8 × 10⁻⁹ A/cm², which is more than two and a half orders of magnitude lower than that of the pure SBTi thin film capacitor. Furthermore, the SBTiV-0.09 thin film exhibited good fatigue endurance up to 10¹⁰ switching cycles. The improved electrical properties may be related to the reduction of internal defects such as bismuth and oxygen vacancies with changes in the grain size by doping of vanadium into SBTi.     

Fabrication of the hydrogen resistive ferroelectric film of the (Pb0.72La0.28)Ti0.93O3/Pb(Zr0.52Ti0.48)O3/(Pb0.72La0.28)Ti0.93O3 heterostructure by a pulsed laser deposition method

(Pb_0.72La_0.28)Ti_0.93O₃ (PLT)/Pb(Zr_0.52Ti_0.48)O₃ (PZT)/PLT heterostructure was fabricated by using a pulsed laser deposition method. After depositing this structure, the hydrogen annealing process was performed in the forming gas (95% N₂ + 5% H₂) at a substrate temperature of 400 °C for 30 min to study the effects of hydrogen passivation.The heterostructure was not degraded by the hydrogen annealing in contrast with the case of PZT film without buffer layers. This heterostructure showed almost no degradation in terms of the remanent polarization even after the H₂ annealing, while the PZT film exhibited 64% reduction, which is from 20.1 to 7.3 μC/cm² after the annealing. The leakage current was decreased by an order in the case of the heterostructure, while the leakage current of the PZT film increased by an order.These can be explained that the PLT bottom buffer layer works as a seeing layer to help the PZT growth and the top PLT buffer layer acts as a barrier for penetrating hydrogen atoms.     

(111)择优取向的Pb(Zr0.52Ti0.48)O3铁电薄膜的制备及研究

选用不同浓度的Pb(Zr_0.52Ti_0.48)O₃溶胶，用Sol-gel法在Pt/Ti/SiO₂/Si基片上沉积一层厚度不同的Pb(Zr_0.52Ti_0.48)O₃ (PZT52)过渡层，经400℃烘烤、550℃退火等程序后，再用Sol-gel法在PZT52过渡层上沉积Pb(Zr_0.52Ti_0.48)O _{关键词： PZT铁电薄膜 择优取向 过渡层 剩余极化强度}     

Fatigue-free Pb(Zr0.52Ti0.48)O3 thin films on indium tin oxide coated substrates by a sol-gel process

Fatigue-free Pb(Zr_0.52Ti_0.48)O₃ (PZT) ferroelectric thin films were successfully prepared on indium tin oxide (ITO) coated glass substrates using the sol-gel method combined with a rapid thermal annealing process (RTA). The films post-annealed at a temperature of 700 °C for 2 min by RTA process formed (110)-oriented Pb(Zr_0.52Ti_0.48)O₃ thin films with pure perovskite structure, and had a good morphology as well. The good ferroelectricity of the prepared PZT films was confirmed by P–E hysteresis loop measurements. Fatigue characteristics showed stable behavior. Degradation in polarization was not found while the repeating cycles were up to 10¹¹, and a low leakage current density of 10⁻⁸ A/cm² was also obtained from the highly fatigue-resisted PZT thin films on ITO/glass substrates. Received: 19 October 1998 / Accepted: 29 March 1999 / Published online: 26 May 1999     

Effect of buffer layers on the property of Pb(Zr,Ti)O3-Pb(Mn,W,Sb,Nb)O3 thin films grown by pulsed laser deposition

New ferroelectric Pb(Zr,Ti)O₃-Pb(Mn,W,Sb,Nb)O₃ (PZT-PMWSN) thin film has been deposited on a Pt/Ti/SiO₂/Si substrate by pulsed laser deposition. Buffer layer was adopted between film and substrate to improve the ferroelectric properties of PZT-PMWSN films. Effect of a Pb(Zr_0.52Ti_0.48)O₃ (PZT) and (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) buffer layers on the stabilization of perovskite phase and the suppression of pyrochlore phase has been examined. Role of buffer layers was investigated depending on different types of buffer layer and thickness. The PZT-PMWSN thin films with buffer layer have higher remnant polarization and switching polarization values by suppressing pyrochlore phase formation. The remnant polarization, saturation polarization, coercive field and relative dielectric constant of 10-nm-thick PLT buffered PZT-PMWSN thin film with no pyrochlore phase were observed to be about 18.523 μC/cm², 47.538 μC/cm², 63.901 kV/cm and 854, respectively.     

Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics

We describe the structural properties and electrical characteristics of thin thulium oxide (Tm₂O₃) and thulium titanium oxide (Tm₂Ti₂O₇) as gate dielectrics deposited on silicon substrates through reactive sputtering. The structural and morphological features of these films were explored by X-ray diffraction, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and atomic force microscopy, measurements. It is found that the Tm₂Ti₂O₇ film annealed at 800 °C exhibited a thinner capacitance equivalent thickness of 19.8 Å, a lower interface trap density of 8.37 × 10¹¹ eV⁻¹ cm⁻², and a smaller hysteresis voltage of ∼4 mV than the other conditions. We attribute this behavior to the Ti incorporated into the Tm₂O₃ film improving the interfacial layer and the surface roughness. This film also shows negligible degrees of charge trapping at high electric field stress.     

Structure evolution and stoichiometry control of Pb(Zr, Ti)O3 thick films fabricated by electrospray assisted vapour deposition

Well-crystallized and stoichiometric Pb(Zr, Ti)O₃ (PZT) films, typically ∼5 μm thick, with pure perovskite-type rhombohedral structures have been successfully prepared via an electrospray assisted vapour deposition (ESAVD) method. Control of the deposition temperature within a narrow range of 300-400 °C resulted in films with the most desirable phases. PZT films with close stoichiometric match with the expected composition ratio and uniform element distribution were obtained by adding the appropriate levels of excess Pb in the precursor solutions. The annealed films were uniform, dense, compact and adherent to the substrates. The dielectric constant, ?_r, and loss tangent, tan δ, of the fabricated PZT films measured at 10 kHz were 442 and 0.09, respectively. The ESAVD deposited PZT films showed a remanent polarization, P_r, of 15.3 μC/cm² and coercive field, E_c, of 86.7 kV/cm. These results demonstrate the clear potential of the ESAVD method as a promising technique for the fabrication of thick PZT films.     

Synthesis of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 powder and sintered ferrites by high energy ball-milling process

(Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder prepared by high energy ball-milling process were consolidated by microwave and conventional sintering processes. Phases, microstructure and magnetic properties of the ferrites prepared by different processes were investigated. The (Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder could be prepared by high energy ball-milling process of raw Fe₃O₄, MnO₂, ZnO, TiO₂ and MgO powders. Prefired and microwave sintered ferrites could achieve the maximum density (4.86 g/cm⁻³), the average grain size (15 μm) was larger than that (10 μm) prepared by prefired and conventionally sintered ferrites with pure ferrite phase, and the saturation magnetization (66.77 emu/g) was lower than that of prefired and conventionally sintered ferrites (88.25 emu/g), the remanent magnetization (0.7367 emu/g) was higher than that of prefired and conventionally sintered ferrites (0.0731 emu/g). Although the microwave sintering process could increase the density of ferrites, the saturation magnetization of ferrites was decreased and the remanent magnetization of ferrites was also increased.     

Ferroelectric properties of Pr and Nb co-substituted Sr0.8Bi2.2Ta2O9 thin films

Thin film of both A- and B-site co-substituted Sr_0.8Bi_2.2Ta₂O₉ (SBT) by Pr³⁺ and Nb⁵⁺, i.e. Sr_0.8Pr_0.1Bi_2.1Ta_1.5Nb_0.5O₉ (SPBTN) was fabricated on Pt/Ti/SiO₂/Si substrates by metalorganic decomposition method. The Nb⁵⁺ substitution at B-site and Pr³⁺ substitution at A-site enhanced the remanent polarization and reduced the coercive field of the films, respectively. The remanent polarization (2P_r) value of the SPBTN film was 22 μC/cm². The coercive field (2E_c) value of the SPBTN film was 102 kV/cm, which was much lower than that of SBTN (165 kV/cm). The effects of substitution on structural and ferroelectric properties of SBT were discussed in detail. As a result, the A- and B-sites co-substitution may be one of the promising ways to improve ferroelectric properties of SBT.     

Pulsed laser deposition of Pb(Zr0.52Ti0.48)O3 thin film on cobalt ferrite nano-seed layered Pt(111)/Si substrate: effect of oxygen pressure

The effect of oxygen pressure during pulsed laser deposition of Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films on CoFe₂O₄ nano-seed layered Pt(111)/Si substrate was investigated. The PZT film deposited at oxygen pressure lower than 25 mTorr is identified as both perovskite and pyrochlore phases and the films deposited at high oxygen pressure (50-100 mTorr) show the single-phase perovskite PZT that has a perfect (111)-orientation. In addition, the film deposited at P_O2 of 50 mTorr has a uniform surface morphology, whereas the film deposited at P_O2 of 100 mTorr has a non-uniform surface morphology and more incompacted columnar cross-section microstructure. The polarization of film deposited at 100 mTorr is higher than that deposited at 50 mTorr, but shift of the hysteresis loop along the electrical field axis in the film deposited at P_O2 of 100 mTorr is larger than that of the film deposited at P_O2 of 50 mTorr.     

Effect of different annealing methods on ferroelectric properties of 0.95Pb(Sc0.5Ta0.5)O3-0.05PbTiO3 thin films

0.95Pb(Sc_0.5Ta_0.5)O₃-0.05PbTiO₃ thin films were prepared on LaNiO₃/SiO₂/Si substrate by radio frequency magnetron sputtering, and the films were annealed subsequently with repeated many times by two approaches: normal one-step rapid thermal annealing and innovative two-steps rapid thermal annealing. X-ray diffraction demonstrates that all the films were preferred (1 0 0) oriented and an appropriate repeat of annealing process can enhance perovskite phase of the films. Scanning electron microscopy suggests that the films treated by two-steps rapid thermal annealing show crack-free, uniform size grains and dense microstructure. Measurement of remnant polarization and leakage current dependence of electric field confirms that the films treated by two-steps rapid thermal annealing exhibit better ferroelectric properties than the films treated by one-steps rapid thermal annealing. The results reveal that microstructure plays an important role in enhanced ferroelectric properties of the 0.95Pb(Sc_0.5Ta_0.5)O₃-0.05PbTiO₃ thin films.     

Enhanced ferroelectric property of (Pb0.95Ca0.05)(Nb0.02Zr0.80Ti0.20)O3 thin films prepared by RF magnetron sputtering

(Pb_0.95Ca_0.05)(Nb_0.02Zr_0.80Ti_0.20)O₃ [PCNZT] thin films were deposited on the Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by RF magnetron sputtering with and without a LaNiO₃ [LNO] buffer layer. Ca and Nb elements in PZT films enhance the ferroelectric property, LaNiO₃ buffer layer improves the crystal quality of the PCNZT thin films. PCNZT thin films possess better ferroelectric property than that of PZT films for Ca and Nb ion substitution, moreover, PCNZT thin films with a LNO buffer layer possess (1 0 0) orientation and good ferroelectric properties with high remnant polarization (P_r = 38.1 μC/cm²), and low coercive field (E_c = 65 kV/cm), which is also better than that of PCNZT thin films without a LNO buffer layer (P_r = 27.9 μC/cm², E_c = 74 kV/cm). The result shows that enhanced ferroelectric property of PZT films can be obtained by ion substitution and buffer layer.     

层状钙钛矿结构铁电薄膜SrBi2Ta2O9的掺杂改性研究

研究了Nb掺杂对层状钙钛矿结构铁电薄膜SrBi₂Ta₂O₉(SBT)的改性，分析了其改性机理.利用光声光谱技术对不同含量Nb掺杂SBT薄膜的可见光吸收进行了分析.结果表明掺杂SBT薄膜在580nm处的吸收带随Nb含量的增加发生红移，这暗示掺杂SBT薄膜的能隙与Nb含量有关.对掺杂SBT薄膜的铁电性质研究表明，薄膜的剩余极化值依赖于薄膜中的Nb含量，这与薄膜存在相界有关. 关键词：     

Mo掺杂SrBi4Ti4O15陶瓷的铁电介电性能

用传统的固相烧结工艺，制备了钼掺杂铁电陶瓷样品SrBi₄Ti₄O₁₅(SBTi)铁电陶瓷SrBi_4-2x/3Ti_4-xMo_xO₁₅(x=0.00，0.003，0.012，0.03，0.06，0.09).X射线衍射的结果表明，样品均为单一的层状钙钛矿结构相，Mo掺杂未改变SBTi的晶体结构.通过扫描电子显微镜观测发现，样品晶粒为片状，随掺杂量的增加，晶粒逐 关键词： 4Ti₄O₁₅')" href="#">SrBi₄Ti₄O₁₅ Mo掺杂 剩余极化 居里温度     

Chemical synthesis of spinel nickel ferrite (NiFe2O4) nano-sheets

The present investigation is related to the deposition of single-phase nano-sheets spinel nickel ferrite (NiFe₂O₄) thin films onto glass substrates using a chemical method. Nano-sheets nickel ferrite films were deposited from an alkaline bath containing Ni²⁺ and Fe²⁺ ions. The films were characterized for their structural, surface morphological and electrical properties by means of X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and two-point probe electrical resistivity techniques. The X-ray diffraction pattern showed that NiFe₂O₄ nano-sheets are oriented along (3 1 1) plane. The FT-IR spectra of NiFe₂O₄ films showed strong absorption peaks around 600 and 400 cm⁻¹ which are typical for cubic spinel crystal structure. Microstructural study of NiFe₂O₄ film revealed nano-sheet like morphology with average sheet thickness of 30 nm. The room temperature electrical resistivity of the NiFe₂O₄ nano-sheets was 10⁷ Ω cm.     

Si基Bi3.25La0.75Ti3O12铁电薄膜的制备与特性研究

采用Sol-Gel工艺低温制备了Si基Bi_3.25La_0.75Ti₃O₁₂铁电薄膜.研究了退火温度对薄膜微观结构、介电特性与铁电性能的影响.500℃退火处理的Bi_3.25La_0.75Ti₃O₁₂薄膜未能充分晶化，晶粒细小且有非晶团聚，介电与铁电性能均较差.高于550℃退火处理的Bi_3.25La_{0.75 关键词： 铁电薄膜 3.25}La_0.75Ti₃O₁₂')" href="#">Bi_3.25La_0.75Ti₃O₁₂ Sol-Gel工艺     

Ferroelectric and dielectric properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> thin films grown on Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> film layer

Ferroelectric and dielectric properties of bilayered ferroelectric thin films, SrBi₄Ti₄O₁₅ grown on Bi₄Ti₃O₁₂, were investigated. The thin films were annealed at 700°C under oxygen atmosphere. The bilayered thin films were prepared on a Pt(111)/Ti/SiO₂/Si substrate by a chemical solution deposition method. The dielectric constant and dielectric loss of the bilayered thin films were 645 and 0.09, respectively, at 100 kHz. The value of remnant polarization (2P _r) measured from the ferroelectric thin film capacitors was 60.5 μC/cm² at electric field of 200 kV/cm. The remnant polarization was reduced by 22% of the initial value after 10¹⁰ switching cycles. The results showed that the ferroelectric and dielectric properties of the SrBi₄Ti₄O₁₅ on Bi₄Ti₃O₁₂ ferroelectric thin films were better than those of the SrBi₄Ti₄O₁₅ grown on a Pt-coated Si substrate suggesting that the improved properties may be due to the different nucleation and growth kinetics of SrBi₄Ti₄O₁₅ on the c-axis-oriented Bi₄Ti₃O₁₂ layer or on the Pt-coated Si substrate.     

(Bi,La)4Ti3O12-Sr(Bi,La)4Ti4O15共生结构铁电材料性能研究

采用固相烧结工艺，制备了不同La掺杂量(x=0.00，0.25，0.50，0.75，1.00，1.25和1.50) 的(Bi, La)₄Ti₃O₁₂-Sr(Bi, La)₄Ti4O₁₅ (SrBi_8-xLa_xT i₇O₂₇)共生结构铁电陶瓷样品.用x射线衍射对其进行微结构分析 ，并测量铁 关键词： 4Ti₃O₁₂-SrBi₄Ti₄O₁₅')" href="#">Bi₄Ti₃O₁₂-SrBi₄Ti_{4O15 La掺杂 铁电性能 居里温度 弛豫铁电}