50-watt ytterbium-doped double-clad fiber laser

A ytterbium-doped double-clad fiber laser with more than 50-W output, near diffraction-limited is demonstrated in SIOM. The optical-to-optical efficiency is about 44% with respect to incident pump power and the slope efficiency is 69% against launched pump power.     

2277-W continuous-wave diode-pumped heat capacity laser

A high power continuous-wave (CW) diode-pumped Nd:YAG laser operated in heat capacity mode is demonstrated by use of two identical highly efficient diode-pumped laser heads placed in a plane-plane resonator.The laser heads are uniformly pumped with a five-fold symmetrical side-pumping configuration, and each head is able to output maximum output power of 2200 W at 808 nm.Under a total pump power of 4290 W,the output power of the laser at 1064 nm is up to 2277 W,corresponding to an optical-to-optical efficiency of 53.1%.     

Tunable CW Tm,Ho:YLF laser at 2μm

A tunable continuous wave (CW) low temperature operating Tm (6 at.-%),Ho (0.6 at.-%):YLF laser pumped by fiber-coupled diode laser is reported. The maximum output power is 4.16 W at 2073 nm by use of 30% output coupling, the slope efficiency is 33%. A tuning range from 2049 to 2081 nm is achieved with a birefringent filter (BF). The factors that contribute to the output power and tuning range are discussed.     

Figure-eight actively-passively mode-locked erbium-doped fiber laser

The advantages of using nonlinear optical loop mirror (NOLM) to compress pulse with slight amplitude fluctuation and reflected energy loss are analyzed in theory. Experimentally the NOLM is placed in an actively mode-locked erbium-doped fiber ring laser to form a figure-eight actively and passively mode-locked fiber laser. 12 ps mode-locked pulses centered at 1.543 μm were obtained with the modulation frequency of 2.498748700 GHz. 3.715 mW output power is achieved with 50 mW pump power.     

Experimental study on high power all-fiber laser

<正>A high power all-fiber laser is experimentally studied.A monolithic fiber laser system with only one stage of resonator cavity is constructed and 404-W continuous wave(CW) output power is obtained.Its opticalto -optical conversion efficiency is up to 64%.The laser central wavelength is at 1081 nm with the spectral full-width at half-maximum(FWHM) of 2 nm.The laser setup can work with excellent stability;in the long time of high power operation,no thermal distortions or damages are observed.     

Highly efficient cascaded P-doped Raman fiber laser pumped by Nd:YVO4 solid-state laser

A highly efficient cascaded P-doped Raman fiber laser(RFL)pumped by a 1064-nm continuous wave (CW)Nd:YVO_4 solid-state laser is reported.1.15-W CW output power at 1484 nm is obtained while the input pump power is 4 W,corresponding to the power conversion efficiency of 28.8%.The threshold pump power for the second-order Stokes radiation is 1.13 W.The slope efficiency is as high as 42.6%.The experimental results are in good agreement with theoretical ones.Furthermore,the power instability of the P-doped RFL at 1484 nm in an hour is observed to be less than 5%.     

High power wavelength-defined all-fiber Yb3+-doped double clad fiber laser

An all-fiber Yb3+-doped double-clad fiber laser using FBGs as cavity mirrors is investigated in this paper. Continuous-wave (CW) output power of 1.18 W with defined wavelength at 1.06 um and narrow line-width of less than 0.1 nm is obtained. The slope efficiency and the maximum optical-to-optical efficiency of laser output are 68% and 51%, respectively, with respect to absorbed pump power.     

Erbium-doped CW and Q-switched fiber ring laser with fiber grating Michelson interferometer

The band-pass characteristic of fiber grating Michelson interferometer is analyzed, which acts as bothband-pass filter and Q-switch. An erbium-doped fiber ring laser based on fiber grating Michelsoninterferometer is implemented for producing single longitudinal mode CW operation with 5 MHz spectrallinewidth and up to 6 mW output power. In Q-switched operation, stable fiber laser output pulses withrepetition rate of 800 Hz, pulse width of 0.6 μs, average power of 1.8 mW and peak power of 3.4 W aredemonstrated. The peak power and average power of the Q-switched pulses are varied with the repetitionrate.     

Performance of a liquid-nitrogen-cooled CW Tm, HorYLF laser

A liquid-nitrogen-cooled Tm, Ho:YLF laser is constructed with a 10-mm-long Tm(6%) and Ho(0.5%) co-doped yttrium lithium fluoride crystal pumped by a laser diode operating at 792 nm. The laser output power is improved by cooling the Tm, Ho:YLF crystal from 300 to 77 K. When the crystal is kept at 77 K, the laser threshold pump power is 230 mW, the slope efficiency is 27.4%, and the maximum optical-to-optical efficiency is 19.9%. At the same time, the relation between the input power and the output power at different temperatures is obtained.     

500-W high average power,high beam quality Nd:YAG solid-state laser with one focusing reflector

In order to explore a 56-J high energy,high frequency lamp-pumped pulsed Nd:YAG solid-state laser, the main factors influencing the higher laser output energy are analyzed,the relation between output power and input power and reflectivity is simulated theoretically,and the effective measures to improve the efficiencies of the laser are brought forward.As a result,pulse width is tunable between 0.1 and 10 ms,frequency between 1 and 1000 Hz.When the input electrical power is 12 kW,the laser can output maximum single pulse energy of 56 J and average power of 500 W with the beam quality of 16.5 mm·mrad, total electro-optic efficiency of 4.2%,and the in stability of±2% output power.It is indicated that the parameters corresponds with the results of theoretical analysis and simulation.