Erbium-doped CW and Q-switched fiber ring laser with fiber grating Michelson interferometer

The band-pass characteristic of fiber grating Michelson interferometer is analyzed, which acts as bothband-pass filter and Q-switch. An erbium-doped fiber ring laser based on fiber grating Michelsoninterferometer is implemented for producing single longitudinal mode CW operation with 5 MHz spectrallinewidth and up to 6 mW output power. In Q-switched operation, stable fiber laser output pulses withrepetition rate of 800 Hz, pulse width of 0.6 μs, average power of 1.8 mW and peak power of 3.4 W aredemonstrated. The peak power and average power of the Q-switched pulses are varied with the repetitionrate.     

Single-frequency, single-polarization ytterbium-doped fiber laser by self-injection locking

We demonstrated a stable single-frequency, single-polarization operation of ytterbium-doped fiber laser. As a novel practical method to realize single-polarization operation of fiber distributed Bragg reflector (DBR)laser, we proposed self-injection locking (SIL) with an active fiber ring feedback cavity. The laser has high output power exceeding 15 mW, wavelength of 1053.20 nm, and side-mode suppression ratio greater than 60 dB. The SIL fiber laser shows the improvements in output power and side-mode suppression compared with the fiber DBR laser. No mode-hopping is observed within 2 hours.     

Double-pass ytterbium-doped fiber amplifier with high gain coefficient and low noise figure

We have proposed and demonstrated a double-pass ytterbium-doped fiber amplifier using an optical circulator and a fiber Bragg grating as reflector. When the signal has passed through the ytterbium-doped fiber once, it reflects off a 0.2-nm passive fiber Bragg grating filter. This reduces amplified spontaneous emission (ASE) noise from the first pass. The input signal light is amplified both forward and backward through ytterbium-doped fiber. With this double-pass configuration, 1053.15-nm unsaturated signal gain of 28 dB, gain coefficient of 1.1 dB/mW, and noise figure of less than 4 dB are achieved at 977-nm pump power of 68 mW. It is also found that this double-pass configure provides enhancing gain coefficient and improving noise figure by comparison with single-pass configuration.     

Single-frequency,single-polarization ytterbium-doped fiber laser by self-injection locking

We demonstrated a stable single-frequency,single-polarization operation of ytterbium-doped fiber laser. As a novel practical method to realize single-polarization operation of fiber distributed Bragg reflector (DBR) laser,we proposed self-injection locking (SIL) with an active fiber ring feedback cavity.The laser has high output power exceeding 15 mW,wavelength of 1053.20 nm,and side-mode suppression ratio greater than 60 dB. The SIL fiber laser shows the improvements in output power and side-mode suppression compared with the fiber DBR laser.No mode-hopping is observed within 2 hours.     

Multiple-Pulse Operation in Passively Mode-Locked Fibre Laser with Positive Dispersion Cavity

We report the observation of rectangular shape spectrum in passively mode-locked fibre laser with positive dispersion cavity. The spectrum is broad and flat, and 3dB bandwidth can be up to 17.61 nm. Multiple-pulse operation is observed in our laser system. The spectrum width, pulse energy, pulse width and peak power of the mode-locked laser output change with the appearance of multiple-pulse operation.