Multi-wavelength fiber source based on double-pass superfluorescent fiber source and a reflection Mach-Zehnder filter

A spectrum-sliced multi-wavelength fiber source (SS-MWFS) based on double-pass superfluorescent fiber source (SFS) with a reflection Mach-Zehnder filter (RMZF) as the reflected comb filter is demonstrated. With backward pumped configuration, MWFS with 50 wavelength channels of extinction ratio (ER) of 16.7 dB is obtained over the almost total C-band gain region. Total output power of the MWFS is 16.2 mW which shows that a power of about 0.3 mW of per channel is achieved. The SS-MWFS with forward pumped configuration is also discussed for comparing. The backward pumped configuration can provide a larger output power while only a little smaller ER than that of the forward pumped configuration.     

Erbium-doped CW and Q-switched fiber ring laser with fiber grating Michelson interferometer

The band-pass characteristic of fiber grating Michelson interferometer is analyzed, which acts as bothband-pass filter and Q-switch. An erbium-doped fiber ring laser based on fiber grating Michelsoninterferometer is implemented for producing single longitudinal mode CW operation with 5 MHz spectrallinewidth and up to 6 mW output power. In Q-switched operation, stable fiber laser output pulses withrepetition rate of 800 Hz, pulse width of 0.6 μs, average power of 1.8 mW and peak power of 3.4 W aredemonstrated. The peak power and average power of the Q-switched pulses are varied with the repetitionrate.     

级联掺磷光纤喇曼激光器的解析优化

讨论了二级级联喇曼光纤激光器的解析解和优化设计.通过引入几何平均功率、增益因子和归一化光纤有效长度,将描述泵浦光和斯托克斯光沿喇曼增益光纤分布的微分方程组简化成代数方程组,在对泵浦光采用线性传播近似后,获得了二级级联喇曼激光器的解析解.所获得的解析解同数值模拟结果吻合得很好.利用该解析解可方便和快速地讨论级联喇曼激光器的优化设计,计算不同泵浦功率下的最佳光纤长度、输出光纤光栅反射率和转换效率.泵谱功率越大,最佳光纤长度越短,最佳输出光纤光栅反射率越小.     

新颖的双通道输出高功率掺铒光纤宽带光源

在分析L波段放大自发辐射(ASE)谱产生原理的基础上,设计出一种新颖的双级结构掺铒光纤ASE宽带光源,该光源可在两个端口分别输出高功率的C波段和L波段的ASE谱.设计将C波段ASE谱注入到掺铒光纤中作为L波段ASE谱的二次抽运源,使得L波段ASE谱功率得到了有效提高.优化光源结构参量后从两个端口分别获得了12.97 dBm和12.81 dBm的C波段和L波段ASE宽带谱.将两个输出端口组合得到了功率为15.9 dBm,泵浦转换效率达到21.6%的C+L波段超宽带ASE光源.     

High efficiency broad bandwidth erbium-doped superfluorescent fiber source

A practical two-stage double-pass structure using high concentration erbium-doped fiber and 1480-nm pump laser diode is suggested for a high power and broad bandwidth erbium-doped superfluorcscent fiber source. A considerable increase in output power and bandwidth extension is achieved by adding an unpumped fiber and a broadband fiber mirror to make the most of wasted backward amplified spontaneous emission as both pump and input light source simultaneously. Superfluorcscent fiber source with nearly 80-nm bandwidth and 28.6-mW output power is obtained experimentally.     

Highly efficient cascaded P-doped Raman fiber laser pumped by Nd:YVO4 solid-state laser

A highly efficient cascaded P-doped Raman fiber laser （RFL） pumped by a 1064-nm continuous wave （CW） Nd：YVO4 solid-state laser is reported. 1.15-W CW output power at 1484 nm is obtained while the input pump power is 4 W, corresponding to the power conversion efficiency of 28.8%. The threshold pump power for the second-order Stokes radiation is 1.13 W. The slope efficiency is as high as 42.6%. The experimental results are in good agreement with theoretical ones. Furthermore, the power instability of the P-doped RFL at 1484 nm in an hour is observed to be less than 5%.     

High accuracy wavelength locking of a DFB laser using tunable polarization interference filter

A temperature-tunable polarization interference filter (PIF) made of YVO4 crystal has been presented and applied for wavelength locking of a distributed feedback (DFB) semiconductor laser in dense wavelength-division-multiplexing (DWDM) optical communication systems. This new design offers a flexible way to monitor and then lock an operating wavelength of DFB laser to any preselected point without dead spots. The results show that the laser wavelength can be locked with accuracy better than ±0.01 nm with much relaxed requirement on temperature stability of the filter.     

Characteristics of stable L-band SFS using dual-forward synchronous pumping technique

We investigate the characteristics of the dual-forward synchronously pumped L-band erbium-doped su- perfiuorescent fiber source （SFS）. The effects of pump ratio and fiber length arrangements on the output characteristics of the L-band SFS in terms of mean wavelength, spectral linewidth, and output power are analyzed. It is shown that the optimized pump ratio and fiber length arrangements provide broadening spectral linewidth and enhanced pumping efficiency, while the synchronous pump ensures stable mean wavelength operation. A new single-forward pumping scheme with a section of unpumped fiber is pro- posed to achieve a mean wavelength stable L-band SFS with a broadening linewidth of 50.4 nm and a pumping efficiency of 33.5%.     

Simulation analysis of one-stage C+L-band erbium-doped fiber ASE source with double-pass bi-directional pumping configuration

A new technique to generate a C+L-band flat amplified spontaneous emission (ASE) source in one-stage erbium-doped fiber (EDF) using bi-directional pumping configuration is analyzed. The simulation results show that the key point of obtaining flat C+L-band ASE spectrum in one-stage EDF is using a laser diode operated at 980 nm as backward pump source. ASE source with nearly 80-nm bandwidth can be obtained by means of selecting suitable fiber length and properly adjusting the ratio of forward to backward pump power.     

A Novel Conventional／Long—Band Erbium—Doped Fibre Amplified Spontaneous Emission Source with 80 nm Bandwidth

We report on a one-stage erbium-doped fibre amplified spontaneous emission (ASE) source with 80 nm bandwidth and 13.5 dBm output power.the broad bandwidth erbium ASE source was realized in an erbium-doped fibre with 37m length by a 1480 nm laser diode and a 980 nm laser diode as forward and backward pump sources,respectively.The total pump power is only 95.7mW.