Density functional study on structural and electronic properties of bimetallic gold--yttrium clusters: comparison with pure gold and yttrium clusters

Employing first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Augold--yttrium bimetallic cluster, density functional theory, HOMO--LUMO gap, equilibrium structureProject supported by the Education Committee of Chongqing (Grant No KJ051105) and the National Natural Science Foundation of China (Grant No 10276028).3640, 3640B, 3120A, 3130J9/1/2007 12:00:00 AMEmploying first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Augold--yttrium bimetallic cluster, density functional theory, HOMO--LUMO gap, equilibrium structureProject supported by the Education Committee of Chongqing (Grant No KJ051105) and the National Natural Science Foundation of China (Grant No 10276028).3640, 3640B, 3120A, 3130J9/1/2007 12:00:00 AMEmploying first-principles methods, based on the density functional theory, this paper investigates the ground state geometric and electronic properties of pure gold clusters, pure yttrium clusters and gold clusters doped each with one yttrium atom. It is shown that the average bond lengths in the Au$_{n - 1}$Y($n \le $9) bimetallic clusters are shorter than those in the corresponding pure gold and yttrium clusters. The most stable isomers of the yttrium-doped gold clusters tend to equally delocalize valence s, p and d electrons of the constituent atoms over the entire structure. The Y atom has maximum number of neighbouring Au atom, which tends to be energetically favourable in the lowest-energy equilibrium structures, because the Au--Y bond is stronger than the Au-Au bond. The three-dimensional isomers of Au$_{n - 1}$Y structures are found in an early appearance starting at $n$=5 (Au$_{4}$Y). Calculated vertical ionization potential and electron affinities as a function of the cluster size show odd-even oscillatory behaviour, and resemble pure gold clusters. However, one of the most striking feature of pure yttrium clusters is the absence of odd-even alternation, in agreement with mass spectrometric observations. The HOMO--LUMO gap of Au$_{3}$Y is the biggest in all the doped Au$_{n - 1}$Y($n \le $9) bimetallic clusters.     

Coalescence of heteroclusters Au767 and Ag767: a molecular-dynamics study

This paper studies the coalescence of heteroclusters Au767 and Ag767 by using molecular dynamics with the embedded atom method, where layer atomic energy is employed to describe the potential energy variation of per atom in different layers along radial direction. The results show that the coalescence is driven by releasing the atomic energy of the coalesced zone. The deformation, which is induced by substitutional and vacancy diffusion during the coalescence, makes the coalesced cluster disorder. If the summation of the thermal energy and the released atomic energy is large enough to keep the disorder state, the clusters form a metastable liquid droplet; otherwise, the clusters coalesce into a solid cluster when the coalesced cluster reaches the equilibrium state, and the coalesced cluster experiences liquid to solid ordering changes during the coalescence of a solid Au767 with a liquid Ag767 and a liquid Au767 with a liquid Ag767. The centre of figure of the cluster system is shifted during the coalescence process, and higher coalescence temperature causes larger shift degree.     

Equilibrium geometries and electronic properties of BenLi （n=2-15） clusters from first principles

This paper studies the equilibrium geometries and electronic properties of Ben and BenLi clusters, up to n=15, by using density-functional theory（DFT） at B3LYP/6-31G（d） level. The lowest-energy structures of Ben and BenLi clusters were determined. The results indicate that a single lithium impurity enhances the stability and chemical reactivity of the beryllium clusters. It finds that the geometries of the host clusters change significantly after the addition of the lithium atom for n ≥8. The lithium impurity prefers to be on the periphery of beryllium clusters, and occupies vertex sites. Both Be4Li, Be9Li, and Be13Li were found to be particularly stable with higher average binding energy, local peaks of second-order energy difference and fragmentation energies. For all the BenLi clusters studied, we found charge transfers from the Li to Be site and co-existence of covalent and metallic bonding characteristics.     

A density functional theoretical investigation of RhSin（n = 1-6） clusters

This paper computationally investigates the RhSin （n = 1 6） clusters by using a density functional approach. Geometry optimizations of the RhSin （n = 1 6） clusters are carried out at the B3LYP level employing LanL2DZ basis sets. It presents and discusses the equilibrium geometries of the RhSin （n = 1-6） clusters as well as the corresponding averaged binding energies, fragmentation energies, natural populations, magnetic properties, and the energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital. Theoretical results show that the most stable RhSin（n = 1-6） isomers keep an analogous framework of the corresponding Sin＋1 clusters, the RhSi3 is the most stable cluster in RhSin （n = 1-6） isomers. Furthermore, the charges of the lowest-energy RhSin （n = 1-6） clusters transfer mainly from Si atom to Rh atom. Meanwhile, the magnetic moments of the RhSin（n = 1-6） arises from the 4d orbits of Rh atom. Finally, compared with the Sin＋1 cluster, the chemical stability RhSin clusters are universally improved.     

Structures and electronic properties of SimN8-m（0 〈 m 〈 8） clusters： a density functional theory study

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.     

First-principles study of structures and electronic properties of cadmium sulfide clusters

The lowest-energy structures and the electronic properties of CdnSn （n = 1 - 8） clusters have been studied by using denslty-functional theory simulating package DMol^3 in the generalized gradient approximation （GGA）. The ring-like structures are the lowest-energy configurations for n = 2, 3 and the three-dimensional spheroid configurations for n = 4 - 8. The three-dimensional structures may be considered as being built from the Cd2S2 and Cd3S3 rings. Compared to the previous reports, we have found the more stable structures for CdnSn（n = 7, 8）. Calculations show that the magic numbers of CdnSn （n = 1-8） clusters are n = 3 and 6. As cluster size increases, the properties of CdnSn clusters tend to bulk-like ones in binding energy per CdS unit and Mulliken atomic charge, obtained by comparing with the calculated results of the wurtzite and zinc blende CdS for the same simulating parameters.     

Superconductivity without dependence on valenceelectron density in Zn doped YBCO systems

This paper reports that the YBa2Cu3-xZnxO7-δ （x = 0-0.4） samples are researched by means of x-ray diffraction, calculations of binding energy, the positron experiments and variations of oxygen content. The results of simulated calculations, positron experiments and variations of oxygen content support the existence of cluster effect. Moreover, it is concluded that the cluster effect is an important factor on suppression of high-Tc cuprate superconductivity and the Tc does not depend on the density of valence electron directly.     

Stability of small Ni-Ti bimetallic clusters studied by density functional theory

The low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small NiNiNi$_{m}$Ti$_{n}$ clusters, lowest-energy structure, electronic and magnetic propertiesProject supported by the National Natural Science Foundation of China (Grant No.~10874039), and the Natural Science Foundation of Hebei Province of China (Grant Nos.~A2009000246 and 2009000243).3120A, 3640B, 2110K7/3/2009 12:00:00 AMThe low-energy structures and the electronic and the magnetic properties of small Ni$_{n}$Ti$_{n}$ ($n=1$--$6$) and Ni$_{m}$Ti$_{n}$ ($1 \le n \le 4$, $1 \le m \le 4$, $n \ne m$) clusters are investigated by performing all-electron calculations based on density functional theory. Ground states and several isomers near the ground states are determined for these clusters. The results indicate that the growth of small Ni$_{m}$Ti$_{n}$ clusters prefers to form rich Ti--Ni and Ti--Ti bonds. When the percentage of titanium atoms is significantly greater than that of nickel atoms, the nickel atoms are most frequently found above the surface; in contrast, the titanium atoms prefer the bridging sites. A M\"{u}lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.http://cpb.iphy.ac.cn/CN/10.1088/1674-1056/19/4/043102https://cpb.iphy.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=111644NimTin;clusters;lowest-energy;structure;electronic;and;magnetic;propertiesThe low-energy structures and the electronic and the magnetic properties of small Nin Tin(n = 1-6) and Ni m Ti n(1 ≤ n ≤ 4,1 ≤ m ≤ 4,n ≠ m) clusters are investigated by performing all-electron calculations based on density functional theory.Ground states and several isomers near the ground states are determined for these clusters.The results indicate that the growth of small Ni m Ti n clusters prefers to form rich Ti-Ni and Ti-Ti bonds.When the percentage of titanium atoms is significantly greater than that of nickel atoms,the nickel atoms are most frequently found above the surface;in contrast,the titanium atoms prefer the bridging sites.A Mu¨lliken spin population analysis indicates that the total spin of titanium-nickel clusters is not always zero.     

First-principles calculations for elastic properties of rutile TiO2 under pressure

This paper studies the equilibrium structure parameters and the dependences of the elastic properties on pressure for rutile TiO2 by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of density functional theory. The obtained equilibrium structure parameters, bulk modulus B0 and its pressure derivative B′0 are in good agreement with experiments and the theoretical results. The six independent elastic constants of rutile TiO2 under pressure are theoretically investigated for the first time. It is found that, as pressure increases, the elastic constants C11, C33, C66, C12 and C13 increase, The variation of elastic constant C44 is not obvious and the anisotropy will weaken.     

Density functional investigations for geometric and electronic properties of In4M and In12M （M = C,Si, In） clusters

First-principle calculations are performed to study geometric and electronic properties of both neutral and anionic In4M and In12M （M = C, Si, In） clusters. In4C and In4Si are found to be tetrahedral molecules. The icosahedral structure is found to be unfavourable for In12M. The most stable structure for In12C is a distorted buckled biplanar structure while for In12Si it is of an In-cage with the Si located in the centre. Charge effect on the structure of In12M is discussed. In4C has a significantly large binding energy and an energy gap between the highest-occupied molecularorbital level and the lowest unoccupied molecular-orbital level, a low electron affinity, and a high ionization potential, which are the characters of a magic cluster, enriching the family of doped-group-IIIA metal clusters for cluster-assembled materials.     

Ab initio calculations of the ionization spectrum of SO2

The ionization spectrum of sulfur dioxide has been successfully studied by using the symmetry-adapted-cluster configuration-interaction （SAC-CI） general-R and SD-R methods and the basis set correlation-consistent polarized valence triple-zeta （cc-pVTZ）. The SAC-CI general-R method reproduces the experimental spectrum well for both the main peaks and the satellite peaks of ionization spectrum of SO2. The sequence of ionic states corresponding to main peaks of SO2 has been re-determined according to the SAC-CI conclusions and it is reordered as X^2A1, A^2B2, B2A2, C^2B1,D^2A1, E^2B2 and F^2A1. Besides, the equilibrium structures and adiabatic ionization potentials （AIPs） of ionic states of main peaks of SO2 are calculated by using the SAC-CI SD-R method.     

Calculations of state-selective differential cross sections for charge transfer in collisions between O3+ and H2

The non-dissociative charge-transfer processes in collisions between O^3＋ and H2 are investigated by using the quantum-mechanical molecular-orbital coupled-channel （QMOCC） method. The adiabatic potentials and radial coupling matrix elements utilized in the QMOCC calculations are obtained with the spin-coupled valence-bond approach. Electronic and vibrational state-selective differential cross sections are presented for projectile energies of 0.1, 1.0 and 10.0eV/u in the H2 orientation angles of 45° and 89°. The electronic and the vibrational state-selective differential cross sections show similar behaviours： they decrease as the scattering angle increases, and beyond a specific angle the oscillating structures appear. Moreover, it is also found that the vibrational state-selective differential cross sections are strongly orientation-dependent, which provides a possibility to determine the orientations of molecule H2 by identifying the vibrational state-selective differential scattering processes.     

Effects of exchange interaction and spin-fluctuation on the magnetic and magneto-optic properties of NdF3

The exchange interaction between the electrons in the different magnetic ions and the spin-fluctuation of the magnetic ions exist in the paramagnetic media NdF3. The exchange interaction between the electrons in the different magnetic ions may be equivalent to an effective field Hin that is in direct proportion to the magnetization M. The spin-fluctuation of the magnetic ions leads the coefficient of the effective field to vary with temperature. The effective field is given as Hin = -（0.75 ＋ 0.22T） × 10^-5M in NdF3. When the secondary crystal field effect is taken into account, the magnetic susceptibility and Verdet constant are calculated for NdF3 by means of the effective field Hin and the applied field He. The calculated results are in agreement with the measured ones.     

Structures and electronic properties of AUn-1Cu and AUn （n ≤ 9） clusters

A systematic study on the structure and electronic properties of gold clusters doped each with one copper atom has been performed using the density functional theory. The average bond lengths in the Aun-1Cu （n ≤ 9） bimetallic clusters are shorter than those in the corresponding pure gold clusters. The ionization potentials of the bimetallic clusters Aun-1Cu （n 〈 9） are larger than those of the corresponding homoatomic gold clusters except for Aus. The energy gaps of the Au-Cu binary clusters are narrower than those of the Aun clusters except AuCu and Au3Cu. No obvious even-odd effect exists in the variations of the electron affinities and ionization potentials for the Aun-1Cu （n ≤ 9） clusters, which is in contrast to the case of gold clusters Aun.     

Growth of Mn5Ge3 ultrathin film on Ge（111）

The growth of Mn5Ge3 ultrathin films with different thicknesses, prepared by solid phase epitaxy, is studied. The results of scanning tunnelling microscopy and low energy electron diffraction studies show that the film can be formed and it is terminated with a （√3 × √3） R30° surface reconstruction when the thickness of Mn exceeds 3 monolayers. The magnetic properties show that the Curie temperature is about 300 K and the T^2-dependent behaviour is observed to remain up to 220 K.     

Judd--Ofelt analysis of spectra and experimental evaluation of laser performance of Tm3+ doped Lu2SiO5 crystal

This paper reports that the Tm^3＋：Lu2SiO5 （Tm：LSO） crystal is grown by Czochralski technique. The roomtemperature absorption spectra of Tm：LSO crystal are measured on a b-cut sample with 4 at.% thulium. According to the obtained Judd-Ofelt intensity parameters Ω2=9.3155×10^-20 cm^2, Ω4=8.4103×10^-20 cm^2, Ω6=1.5908×10^-20 cm^2, the fluorescence lifetime is calculated to be 2.03 ms for ^3F4 → ^3H6 transition, and the integrated emission cross section is 5.81×10^-18 cm^2. Room-temperature laser action near 2μm under diode pumping is experimentally evaluated in Tm：LSO. An optical-optical conversion efficiency of 9.1% and a slope efficiency of 16.2% are obtained with continuouswave maximum output power of 0.67 W. The emission wavelengths of Tm：LSO laser are centred around 2.06μm with spectral bandwidth of -13.6 nm.     

Effect of Dy substitution on magnetic properties and magnetocaloric effects of Tb6Co1.67Si3 compounds

The magnetic and magnetocaloric properties of(Tb1-xDyx) 6 Co 1.67 Si 3(0 ≤ x ≤ 0.8) have been experimentally investigated.The compounds exhibit a Ce6Ni2Si3-type hexagonal structure and undergo a second-order magnetic transition.The Curie temperature decreases from ～ 187 K to 142 K as the content of Dy grows from 0 to 0.8.The maximal magnetic entropy change,for a field change of 0-5 T,varies between ～ 6.2 and ～ 7.4 J/kg.K,slightly decreasing when Dy is introduced.The substitution of Dy leads to a remarkable increase in refrigeration capacity(RC).A large RC value of ～ 626 J/kg is achieved for x = 0.4 under a field change of 0-5 T.     

First-principles investigation of BAs and BxGa1-xAs alloys

First-principles investigation of BAs and BxGa1-xAs alloys Using first-principles calculations in the generalized gradient approximation, the electronic properties of BAs and BxGa1-xAs alloys are studied. At the Brillouin-zone centre, the lowest conduction band is the three-degenerate p-like Г15c state rather than s-like Г1c state, and the conduction band minimum （CBM） is along the A line between the Г and X points-at approximately 11/14（1,0,0）2π/a. With boron content at 0%-18.75%, BxGa1-xAs alloys have a small （2.6 eV） and relatively composition-independent band-gap bowing parameter, the band-gap increases monotonically by -18meV/B% with increasing boron content. In addition, the formation enthalpies of mixing for BxGa1-xAs alloys with boron content at 6.25% and 12.5% are calculated, and the large formation enthalpies may explain the difficulty in alloying boron to GaAs.     

Study of valence intersubband absorption in tensile strained Si/SiGe quantum wells

The hole subband structures and effective masses of tensile strained Si/Sil-yGey quantum wells are calculated by using the 6 × 6 k·p method. The results show that when the tensile strain is induced in the quantum well, the light-hole state becomes the ground state, and the light hole effective masses in the growth direction are strongly reduced while the in-plane effective masses are considerable. Quantitative calculation of the valence intersubband transition between two light hole states in a 7nm tensile strained Si/Si0.55Ge0.45 quantum well grown on a relaxed Si0.5Ge0.5 （100） substrates shows a large absorption coefficient of 8400 cm^-1.     

Theoretical investigation on near-infrared and visible absorption spectra of nanometallic aluminium with oxide coating in nanoenergetic materials: size and shape effects

The effects of metal core dimension, oxide shell thickness and ellipsoid aspect ratio of Al-Al2O3 core-shell nanoparticles on the near-infrared and visible absorption spectra of nanocomposite Al-Al2O3/nitrocellulose（NC） film are investigated by numerical calculations. Both the size-dependent interband transitions and frequency-dependent free electron damping of the nanometallic aluminium are taken into account in the calculations. Oxidation effect of nanoaluminium is also analysed. It is shown that oxidation may enhance but may also reduce the optical absorption, depending on the excited light energy and initial dimension of nanoparticle. Metal core size and excited light energy dominate the absorption characteristic. The absorption ability of ellipsoidal nanoparticles is larger than that of spheroidal nanoparticles and increases by the square index as the aspect ratio increases. These calculations will provide some significant theoretical guidance for the preparation and laser ignition of nanoenergetic materials.