相位调制数字散斑干涉术

提出一种可绕Ｚ轴转动的粗糙平板（参考物体）实现相位调制，该方法在不改变电子散斑干涉术（ＥＳＰＩ）或数字散干涉术（ＤＳＰＩ）系统装置的情况下，可用于微小离而位移场（例如最大离面位移为λ）的测量，以及复杂形变的离面位移场的自动测量。     

大动态范围形变测量

本文对激光散斑物体轮廓及形变测量和相移轮廓测量原理进行类比,首次提出大动态范围物体三维轮廓及形变测量方法。该方法具有测量原理简单、系统操作简便、测量精度高、测量动态范围大等特点,形变测量范围从亚微米级到毫米级。另外本文还推导了基于减模式激光散斑物体轮廓及形变测量的相位值计算公式。     

双目视觉DIC测量系统的离面位移测量精度

采用离面位移测量精度达到10 nm~20 nm的电子散斑干涉测量系统验证了双目视觉数字散斑相关测量系统的离面位移测量精度。分别用电子散斑干涉测量系统和双目视觉数字散斑相关测量系统同时测量了平板离面位移,并对所测量的位移最大值进行了分析处理及比较。结果表明,双目视觉数字散斑相关测量系统的物体离面位移分布云图与电子散斑干涉测量系统的结果基本相同,且两者位移均方根相差为2.76 m~3.56 m,相对误差为4.59%~7.60%。因此,当被测量物体的离面位移大于4 m时,双目视觉Q400测量系统精度可达到电子散斑干涉测量系统的精度。     

电子散斑归一化互相关法测位移

把粗糙物体表面受到相干光照明时产生的散斑场看作是一个稳态随机信号,在此基础上,本文提出了一种能做到大量程,高精度位移测量的新方法——电子散斑归一化互相关法测位移或称电子散斑照相法测位移.该法实质上是借助数字图像处理技术,通过物体位移前后二个散斑场之间的相关性来进行位移测量方法的发展.文中给出了理论分析和实验系统.实验结果表明,该法有诸如准实时,大量程(毫米级),高精度和线性可靠等优点.     

锁相电子散斑系统

电子散斑干涉计量在变形量检测¹、无损探伤、振动分析^(2,3)等领域具有广泛的应用前景,目前它之所以未能实用化,最重要的原因就是该系统对环境的要求过高,特别是物体的振动和空气的扰动对测量结果影响很大,甚至会导致测量失败,因而国内外学者在不断寻找解决此问题的锁相技术。本文提出了一种简易的切实可行的锁相方法-光学锁相法,消除了物体的振动和空气扰动对电子散斑测量的影响。     

利用电子散斑相移技术测量物体三维面形的方法

为了获得准确的面形测量,提出了一种相移电子散斑干涉技术测量物体面形的测量方法.利用电子散斑干涉产生载波条纹,该载波条纹受到物体表面高度的调制变得弯曲,引起载波条纹相位的变化,可运用相移技术提取物体的相位信息,最后根据高度和相位之间的关系得到物体的面形.介绍了该方法的原理,利用该方法对球冠物体进行了面形测量,证明该方法测量物体面形是可行性的.由于是采用散斑干涉的方法产生干涉条纹,因此该方法测量物体面形具有灵敏度高的优点.     

散斑面内形变场检测系统设计

数字散斑测量是一种非接触、全场测量的高精度光测方法。该系统由散斑生成装置、数据采集装置和数据处理装置三部分组成。散斑生成装置将扩散的激光束投射到待测物体上,用接收屏接收物体散射生成的散斑图像。数据采集装置主要由CCD和数字采集卡组成,CCD拍摄散斑图像,并将其传输给数字采集卡,经采集卡转换成数字图像,以矩阵形式输入到数据处理装置。数据处理装置根据光学相关识别技术设计的检测程序对采集到的数字图像进行相关运算,通过对相关峰的准确定位来获取物体的形变信息。     

三维电子散斑干涉载频调制及其在柴油机上的应用

将电子散斑干涉场的三维载波调制技术应用到三维物体变形测量中.用水平方向、竖直方向及垂直试件表面的三路相干光分别照明物体，在水平和竖直方向通过控制反射镜的微小偏转引入载波，实现位移场干涉条纹的调制；利用物体的微小偏转实现离面位移场干涉条纹的调制；结合傅里叶变换法，分别解调出变形场的位相，从而实现了物体三维变形场的精确测量.将该技术应用到柴油机油泵的三维位移测量上，成功测量了油泵的三维位移场.     

用于多参数同时测量的散斑干涉仪

本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.     

电子散斑干涉载频调制形貌测量方法的分析

根据电子散斑干涉载频调制测量物体形貌的基本原理,物体表面的微小偏转可引入包含物体高度信息的载波干涉条纹。将物体的偏转视为变形,对物体变形与载波干涉条纹之间的关系进行了讨论,得出了离面位移引入载波和面内位移引入含有物体高度信息相位的结论。发现利用典型电子散斑干涉系统测量物体形貌效果最好,并通过实验得到了验证。     

Experimental and numerical investigations of resonant vibration characteristics for piezoceramic plates.

Electronic speckle pattern interferometry (ESPI) is a full field, non-contact technique for measuring the surface displacement of a structure subjected to static loading or, especially, to dynamic vibration. In this article we employ an optical system called the amplitude-fluctuation ESPI with out-of-plane and in-plane measurements to investigate the vibration characteristics of piezoceramic plates. Two different configurations of piezoceramic plates, namely the rectangular and the circular plates, are discussed in detail. As compared with the film recording and optical reconstruction procedures used for holographic interferometry, the interferometric fringes of AF-ESPI are produced instantly by a video recording system. Because the clear fringe patterns will be shown only at resonant frequencies, both the resonant frequencies and the corresponding mode shapes are obtained experimentally at the same time by the proposed AF-ESPI method. Excellent quality of the interferometric fringe patterns for both the in-plane and out-of-plane vibration mode shapes is demonstrated. The resonant frequencies of the piezoceramic plates are also measured by the conventional impedance analysis. From experimental results, we find that the out-of-plane vibration modes (type A) with lower resonant frequencies cannot be measured by the impedance analysis and only the in-plane vibration modes (type B) will be shown. However, both the out-of-plane (bending) and in-plane (extensional) vibration modes of piezoceramic plates are obtained by the AF-ESPI method. Finally, the numerical finite element calculations are also performed, and the results are compared with the experimental measurements. It is shown that the numerical calculations and the experimental results agree fairly well for both the resonant frequencies and the mode shapes.     

固体板背覆薄层特性的低频超声反演方法研究

研究了应用低频超声的反射频谱对固体板厚度及背覆薄层的各特征参数(包括厚度、声速、密度、衰减、声阻抗率、声时)进行反演的方法。从灵敏度函数、目标函数及误差传递方程的角度,对应用反射频谱的谐振频率或幅度谱反演模型系统的单参数和双参数的方法进行了分析讨论。实验使用中心频率为7MHz的探头检测铝板/聚合物薄层样品,在同样的条件下,谐振频率法和幅度谱法反演的单参数反演效果相当,谐振频率方法的双参数反演效果优于幅度谱方法,前者薄层声阻抗率和声时同时反演的平均误差为3.4%和4.7%,而后者没有得到结果。      

EXPERIMENTAL MEASUREMENTS BY AN OPTICAL METHOD OF RESONANT FREQUENCES AND MODE SHAPES FOR SQUARE PLATES WITH ROUNDED CORNERS AND CHAMFERS

Most of the work done on vibration of plates published in the literature includes analytical and numerical studies with few experimental results available. In this paper, an optical system called the amplitude-fluctuation electronic speckle pattern interferometry for the out-of-plane displacement measurement is employed to investigate the vibration behavior of plates with rounded corners and with chamfers. The boundary conditions are traction free along the circumference of the plate. Based on the fact that clear fringe patterns will appear only at resonant frequencies, both resonant frequencies and corresponding mode shapes can be obtained experimentally using the present method. Numerical calculations by finite element method are also performed and the results are compared with the experimental measurements. Good agreements are obtained for both results. It is interesting to note that the mode number sequences for some resonant modes are changed. The transition of mode shapes from the square plate to the circular plate is also discussed.     

缓变波导开放谐振腔的理论分析

本文给出了确定任意纵剖面形状的缓变波导开放谐振腔内各模式谐振频率的普遍关系式。探讨了腔内各谐振模式场的纵向分布函数的求解方法。具体地分析了鼓形腔和双圆锥腔,分别推导了这两种开放腔各模式的固有谐振频率公式以及场的纵向分布函数。理论分析与实验结果甚为一致。     

偏置磁场对磁致伸缩/弹性/压电层合材料磁电效应的影响

根据磁致伸缩材料的非线性本构关系得到其动态杨氏弹性模量和动态压磁系数,结合等效电路法得到磁致伸缩/弹性/压电层合材料的磁电效应与磁致伸缩材料的动态杨氏弹性模量和动态压磁系数的关系,讨论了偏置磁场对这种层合材料的谐振频率和谐振磁电电压转换系数的影响.理论推导和实验结果均表明,存在最佳偏置磁场使磁致伸缩/弹性/压电层合材料的谐振磁电电压转换系数最大. 关键词： 磁致伸缩/弹性/压电层合材料 磁电效应 偏置磁场 非线性本构关系     

Theoretical investigation of resonance frequencies in long wavelength electromagnetic wave scattering process from plasma prolate and oblate spheroids placed in a dielectric layer

Response of a prolate spheroid plasma and/or an oblate spheroid plasma in presence of long wavelength electromagnetic wave has been studied. The resonance frequencies of these objects are obtained and it is found that they reduce to the resonance frequency of spherical cold plasma. Moreover, the resonant frequencies of prolate spheroid plasma and oblate spheroid plasma covered by a dielectric are investigated as well. Furthermore, their dependency on dielectric permittivity and geometry dimensions is simulated.     

Local resonant characteristics of a layered cylinder embedded in the elastic medium

Three kinds of resonant modes of a single layered circular elastic cylinder embedded in the elastic medium are analysed by considering the oscillation of the scatter＇s core, based on the fact that the core moves as a rigid body when the shell material is very compliant. The resonant frequencies of the single resonator acquired by our method are in good agreement with those calculated by the local interaction simulation approach （LISA） for the local resonant phononic crystal. Therefore, the local resonant characteristics of a single layered circular elastic cylinder can be used to evaluate the resonant frequencies of the phononic crystal. The effects of the geometrical and physical parameters of the shell and the core are also studied in details. This work is significant for designing the locally resonant phononic crystal based on the local resonant characteristics of the single resonator, and the resonant frequencies can be tuned by selecting the geometrical sizes and the materials.     

Experimental measurements on transverse vibration characteristics of piezoceramic rectangular plates by optical methods

This study provides two non-contact optical techniques to investigate the transverse vibration characteristics of piezoceramic rectangular plates in resonance. These methods, including the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), are full-field measurement for AF-ESPI and point-wise displacement measurement for LDV, respectively. The edges of these piezoceramic rectangular plates may either be fixed or free. Both resonant frequencies and mode shapes of vibrating piezoceramic plates can be obtained simultaneously by AF-ESPI. Excellent quality of the interferometric fringe patterns for the mode shapes is obtained. In the LDV system, a built-in dynamic signal analyzer (DSA) composed of DSA software and a plug-in waveform generator board can provide the piezoceramic plates with the swept-sine excitation signal, whose gain at corresponding frequencies is analyzed by the DSA software. The peaks appeared in the frequency response curve are resonant frequencies. In addition to these optical methods, the numerical computation based on the finite element analysis is used to verify the experimental results. Good agreements of the mode shapes and resonant frequencies are obtained for experimental and numerical results.     

一维反铁磁光子晶体光学双稳态效应研究

基于传递矩阵方法和光局域化原理, 本文研究了一维反铁磁光子晶体共振频率附近光学双稳态效应随电磁波入射角、 外磁场强度及电介质层数的变化.研究发现, 当外磁场为1.0 kG(1 G=10^-4 T)、电磁波小角度入射时, 反铁磁材料高低共振频率附近均可探测到光学双稳态效应; 当电磁波大角度入射时, 仅在高共振频率附近探测到光学双稳态效应. 然而, 当外磁场强度增加到2.0 kG时, 由于反铁磁材料的高低共振频率向两侧移动, 低共振频率附近缺失的光学双稳态频率窗口又被有效激发. 此外, 电磁波小角度入射时, 电介质层数在低共振频率附近对双稳态效应影响较明显.     

Vibrational characteristics of the embalmed human femur

The resonant frequencies and mode shapes of contralateral femurs have been identified by experimental and analytical procedures. Also, the cross-sectional area, centroid, and principal moments of inertia were computed throughout the femur length for both compact and cancellous bone. The resonant frequencies of freely vibrating specimens were identified from transfer function measurements by using a Fourier analyzer. Twenty frequencies were noted in a frequency range of 20 Hz–8 kHz. A mathematical model of the femur consisting of 59 joined uniform segments, with each composed of compact and/or cancellous bone, was analyzed by using a transfer matrix technique. Results of the model enabled classification of the experimental resonances into deformations corresponding to flexure (about principal planes of inertia), torsion, and longitudinal extension with fundamental frequencies at 250, 308, 557, and 2138 Hz, respectively. Generalized non-dimensional resonant frequencies were computed based on femur geometry averaged over its length and compared with those predicted by simple beam models. This analysis provided further understanding of the vibrational behavior of the femur.