Efficient fabrication of transparent antimicrobial poly(vinyl alcohol) thin films

We have explored in situ synthesis of Ag nanoparticles in transparent PVA films in view of increasing areas of application of those films. The two-step procedure consists of ion incorporation in the matrix and subsequent thermal reduction. Smooth and transparent PVA films containing Ag nanoparticles of 5–20 nm were fabricated by this approach. The optical property of the films and the size of metal nanoparticles could be controlled by changing the reaction conditions. By increasing heating temperature, the absorbance and wavelength of surface plasmon resonance (SPR) of the composite film increased, and nanoparticles with larger particle sizes and broader size distributions were obtained. In the temperature range of 130–170 °C, the wavelength of SPR increased with increasing the AgNO₃ concentration. At 190 °C, however, the wavelenght of SPR blue-shifted initially when the AgNO₃ concentration increased from 10 to 80 mmol/L, and red-shifted thereafter. The composite films showed excellent antimicrobial performance toward bacteria such as Escherchia coli. Such hybrids afford very effective and environment-friendly antimicrobial surface coatings.     

Effect of oxygen content and deposition temperature on the characteristics of thin silver films deposited by magnetron sputtering

Thin silver films were prepared by direct current magnetron sputtering in a single-ended in-line sputter system at various substrate temperatures and in O₂ contents in sputter gas, and their electrical, optical, structural and morphological properties together with the compositional properties were investigated. When deposited at room temperature, the electrical and optical properties of Ag films deteriorated with addition of O₂ to sputter gas. Deposition of Ag films in O₂ added sputter gas promoted the formation of Ag crystallites with (2 0 0) plane parallel to the substrate surface. The electrical resistivity and optical reflection of Ag films deposited above 100 °C were not affected by the sputtering plasma containing oxygen. X-ray photoelectron spectroscopic analysis showed that Ag films deposited above 100 °C in O₂ added sputter gas did not possess surplus oxygen in the film, and that the oxidation states of these films were almost identical to that of Ag films deposited in pure Ar gas.     

Tailoring optical properties of TiO2 nanowires coated with Ag nanoparticles by plasmon coupling of Ag nanoparticles

TiO₂ nanowires were grown on titanium foil by an alkali hydrothermal growth method. The as-synthesized nanowires are structurally uniform with diameters of 50-100 nm and lengths of up to a few micrometers. The as-prepared TiO₂ nanowires were coated with Ag nanoparticles by reducing AgNO₃ in solution. The experimental results indicate that the Ag nanoparticles can aggregate together on the surfaces of TiO₂ nanowires by interconnection between nanoparticles. The degree of aggregation of Ag nanostructures can be controlled by changing the concentrations of Ag nanoparticles. The as-prepared nanostructures exhibit a wide optical absorption from 387 to 580 nm that can be easily tuned by controlling the degree of aggregation of Ag nanostructures. The results reveal that optical properties of the Ag-coated TiO₂ nanowires can be enhanced by plasmon coupling of Ag nanoparticles. The as-prepared nanostructures may find potential applications in the field of solar cells.     

Highly transparent Ag doped In2O3 electrodes with high work function for organic solar cells

We report highly transparent Ag-doped In₂O₃ (IAO) films with high work function for use as transparent anodes in organic solar cells (OSCs). The electrical, optical, structural, and morphological properties of IAO films and their work function were investigated as a function of the rapid thermal annealing (RTA) temperature. At an RTA temperature of 600 °C, the IAO film showed a sheet resistance of 23.12 Ohm/square, an optical transmittance of 79.28%, and a work function of 5.21 eV, similar to conventional Sn-doped In₂O₃ (ITO) films. The low resistivity of the IAO film was closely related to oxygen vacancies caused by Ag suboxide formation in the In₂O₃ matrix. A bulk-heterojunction OSC with the optimized IAO anode showed performance comparable to that of an OSC with a reference ITO anode, indicating that the IAO films is a promising anode material for use in OSCs.     

Synthesis of nanocrystalline material by sputtering and laser ablation at low temperatures

Physical vapor deposition techniques such as sputtering and laser ablation – which are very commonly used in thin film technology – appear to hold much promise for the synthesis of nanocrystalline thin films as well as loosely aggregated nanoparticles. We present a systematic study of the process parameters that facilitate the growth of nanocrystalline metals and oxides. The systems studied include TiO₂, ZnO, γ-Al₂O₃, Cu₂O, Ag and Cu. The mean particle size and crystallographic orientation are influenced mainly by the sputtering power, the substrate temperature and the nature, pressure and flow rate of the sputtering gas. In general, nanocrystalline thin films were formed at or close to 300 K, while loosely adhering nanoparticles were deposited at lower temperatures. Received: 31 October 2000 / Accepted: 9 January 2001 / Published online: 26 April 2001     

Effect of Ag Nanoparticles on Optical Properties of R6G Doped PMMA Films

The composite PMMA films containing Ag nanoparticles and rhodamine 6G are prepared. We investigate the fluorescence properties and nonlinear optical properties of R6G/PMMA films influenced by Ag nanoparticles. The fluorescence enhancement factor is about 3.3. The corresponding nonlinear refractive index is measured to be -2.423 ×10^-8 esu using the Z-scan technique, which is much enhanced compared with the R6G/PMMA film. The results indicate that these enhancements are attributed to surface plasmon resonance of Ag nanoparticles.     

Synthesis and luminescent properties of PEO/lanthanide oxide nanoparticle hybrid films

In this study, we investigate the optical properties of lanthanide oxide nanoparticles dispersed in poly(ethylene oxide) (PEO) network as thermally stable polymeric films. The aim of this work is both to keep a good optical transparency in the visible domain and to obtain luminescent materials after incorporation of nanoparticles. For this purpose, we develop luminescent nanocrystals of oxides containing terbium ion as a doping element in Gd₂O₃. These sub-5-nm lanthanide oxides nanoparticles have been prepared by direct oxide precipitation in high-boiling polyalcohol solutions and characterized by luminescence spectroscopy. PEO/lanthanide oxide nanohybrid films are prepared by radical polymerization of poly(ethylene glycol) methacrylate after introduction of lanthanide oxide particles.As a first result; the obtained films present interesting luminescence properties with a very low lanthanide oxide content (up to 0.29 wt%). Furthermore, these films are still transparent and keep their original mechanical properties.Prior to describe the specific applications to optical use, we report here the dynamic mechanical analysis (DMA), X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), and luminescent properties of. nanohybrid films.     

银/二氧化钛核壳纳米颗粒对碲化镉纳米晶的荧光增强研究

利用新合成的复合纳米结构银/二氧化钛核壳纳米颗粒,研究了金属银纳米颗粒对碲化镉纳米晶层荧光的增强情况.结果表明,这种新型复合金属纳米结构能极大地增强发光纳米晶层的荧光强度.银/二氧化钛核壳纳米颗粒是以水合肼、硝酸银和四异丙氧基钛为原材料,利用胶体化学法在水溶液中合成.透射电子显微镜图片表明这种新合成的银/二氧化钛纳米材料基本上呈球形,有较为明显的核壳结构,中间黑色的核是银纳米颗粒,外层颜色较浅部分是二氧化钛壳层.另外,包裹二氧化钛壳层后,银纳米颗粒的表面等离子吸收带从409 nm红移至430 nm,也证实了这种新型核壳纳米材料的形成.将此合成方法得到的银/二氧化钛纳米颗粒和碲化镉纳米晶用旋转涂覆方法进行直接组合后,得到了银纳米颗粒对碲化镉纳米晶荧光的明显增强,并对其增强的物理过程进行了讨论.这种能够增强荧光团发光的新型复合银纳米结构将在发光器件、荧光成像、生物探测等方面具有一定的应用价值.     

Effective barrier height and work function of Mg:Ag thin films with a low Mg concentration acting as cathodes in high-efficiency organic light emitting devices

Organic molecular-beam deposition (OMBD) of Mg:Ag thin films with a low Mg concentration on tris(8-hydroxyquinolino) aluminum (Alq₃) layers at room temperature was performed to investigate the feasibility of using Mg:Ag thin films as cathode electrodes in organic light-emitting devices (OLEDs). The effective barrier height of the Mg:Ag (5:95) thin films grown on the Alq₃ layers, determined from the current-voltage measurements, was as low as 0.22 eV. The work function of the Mg:Ag (5:95) thin film, determined from the secondary electron emission coefficients obtained by using focused ion beam, was 4.12 eV. These results indicate that Mg:Ag (5:95) thin films with a low Mg concentration grown by using the OMBD method hold promise for potential applications as cathode electrodes in high-efficiency OLEDs.     

Evolution of structural and optical properties of rutile TiO2 thin films synthesized at room temperature by chemical bath deposition method

Nanocrystalline thin films of TiO₂ were prepared on glass substrates from an aqueous solution of TiCl₃ and NH₄OH at room temperature using the simple and cost-effective chemical bath deposition (CBD) method. The influence of deposition time on structural, morphological and optical properties was systematically investigated. TiO₂ transition from a mixed anatase–rutile phase to a pure rutile phase was revealed by low-angle XRD and Raman spectroscopy. Rutile phase formation was confirmed by FTIR spectroscopy. Scanning electron micrographs revealed that the multigrain structure of as-deposited TiO₂ thin films was completely converted into semi-spherical nanoparticles. Optical studies showed that rutile thin films had a high absorption coefficient and a direct bandgap. The optical bandgap decreased slightly (3.29–3.07 eV) with increasing deposition time. The ease of deposition of rutile thin films at low temperature is useful for the fabrication of extremely thin absorber (ETA) solar cells, dye-sensitized solar cells, and gas sensors.     

Optical and electrical properties of thermally evaporated In49Se48Sn3 films

Nearly stoichiometric thin films of In₄₉Se₄₈Sn₃ were deposited at room temperature, by conventional thermal evaporation of the presynthesized materials, onto precleaned glass substrates. The microstructural studies on the as-deposited and annealed films, using transmission electron microscopy and diffraction (TEMD), revealed that the as-deposited films are amorphous in nature, while those annealed at 498 K are crystalline. The optical properties of the investigated films were determined from the transmittance and reflectance data, in the spectral range 650-2500 nm. An analysis of the optical absorption spectra revealed a non-direct energy gap characterizing the amorphous films, while both allowed and forbidden direct energy gaps characterized the crystalline films. The electrical resistance of the deposited films was carried out during heating and cooling cycles in the temperature range 300-600 K. The results show an irreproducible behavior, while after crystallization the results become reproducible. The analysis of the temperature dependence of the resistance (ln(R) vs. 1000/T) for crystalline films shows two straight lines corresponding to both extrinsic and intrinsic conduction. The room temperature I-V characteristics of the as-deposited films sandwiched between similar Ag metal electrodes shows an ohmic behavior, while non-ohmic behavior attributed to space charge limited conduction has been observed when the films are sandwiched between dissimilar Ag/Al metal electrodes.     

Nonlinear optical properties of nanometer-size silver composite azobenzene containing polydiacetylene film

Diacetylene monomer containing p-nitrophenyl azobenzene moiety (NADA) was synthesized. Silver nanoparticles with different concentrations were adulterated in the above polymerized NADA (PNADA) films and the third-order nonlinear optical properties were investigated in detail. UV–vis spectra and transmission electron microscopy were used to confirm the formation of PNADA/Ag nanocomposite films. The silver nanoparticles (average size of 10 nm) were well dispersed in the polymer films. The value of the nonlinear refractive index n ₂ for PNADA films (8.48×10⁻¹⁵ cm²/W) was much higher than that of pure polydiacetylene films. Further, the introduction of silver nanoparticles into the PNADA polymer films led to the further enhancement of nonlinear optical properties. The maximum value of n ₂ for PNADA/Ag nanocomposite films could be 11.6×10⁻¹⁵ cm²/W. This enhancement should be ascribed to the surface plasmon resonance of silver nanoparticles.     

Deposition of Ag nanostructures on TiO2 thin films by RF magnetron sputtering

Ag nanostructures on TiO₂ films were deposited by RF magnetron sputtering under variable deposition parameters, such as DC potential, RF-power and total pressure. The concentration, shape, and distribution of the deposited nanostructures and continuous Ag films on thin films of TiO₂ can be tailored by careful variation of the deposition parameters. Controllable clusterlike, islandlike and film Ag structures on TiO₂ film were obtained, respectively. DC potential was found as an appropriate parameter to tailor the change of Ag nanostructure and the overall Ag amount. The compositions, nanostructures and morphologies of nanocomposite films appreciably influence the optical response.     

Ag掺杂p型ZnO薄膜及其光电性能研究

采用超声喷雾热分解法在石英衬底上以醋酸锌水溶液为前驱体,以硝酸银水溶液为Ag掺杂源生长了Ag掺杂ZnO(ZnO：Ag)薄膜.研究了衬底温度对所得ZnO：Ag薄膜的晶体结构、电学和光学性质的影响规律.所得ZnO：Ag薄膜结构良好,在室温光致发光谱中检测到很强的近带边紫外发光峰,透射光谱中观测到非常陡峭的紫外吸收截止边和较高的可见光区透过率,表明薄膜具有较高的晶体质量与较好的光学特性.霍尔效应测试表明,在500℃下获得了p型导电的ZnO：Ag薄膜,载流子浓度为5.30×10¹⁵cm关键词： ZnO：Ag薄膜 p型掺杂 超声喷雾热分解 霍尔效应     

Transport coefficients and defect structure of Sb2−xAgxTe3 single crystals

Incorporation of Ag in the crystal lattice of Sb₂Te₃ creates structural defects that have a strong influence on the transport properties. Single crystals of Sb_2−xAg_xTe₃ (x=0.0; 0.014; 0.018 and 0.022) were characterized by measurements of the temperature dependence of the electrical resistivity, Hall coefficient, Seebeck coefficient and thermal conductivity in the temperature range of 5-300 K. With an increasing content of Ag the electrical resistance, the Hall coefficient and the Seebeck coefficient all decrease. This implies that the incorporation of Ag atoms in the Sb₂Te₃ crystal structure results in an increasing concentration of holes. However, the doping efficiency of Ag appears to be only about 50% of the expected value. We explain this discrepancy by a model based on the interaction of Ag impurity with the native defects in the Sb_2−xAg_xTe₃ crystal lattice. Defects have a particularly strong influence on the thermal conductivity. We analyze the temperature dependence of the lattice thermal conductivity in the context of the Debye model. Of the various phonon scattering contributions, the dominant influence of Ag incorporation in the crystal lattice of Sb₂Te₃ is revealed to be point-defect scattering where both the mass defect and elastic strain play a pivotal role.     

利用总积分散射仪对光学薄膜表面散射特性的研究

利用总积分散射仪对不同条件下制备的金属银膜、Y₂O₃稳定ZrO₂（YSZ）薄膜、TiO₂薄膜和1064 nm与532 nm双波长增透膜的表面均方根（RMS）粗糙度和散射特性的变化规律进行了系统研究,并与样品的制备条件、生长过程、材料组成及光学特性等各方面相结合,对测量结果做出了合理解释,从而使总积分散射测量在其他领域的研究得以扩展和应用. 关键词： 光学薄膜 表面散射 总积分散射仪     

Improvement in thermo mechanical and optical properties of in situ synthesized PMMA/TiO2 nanocomposite

In this paper, transparent thin films of nano titania filled Poly(methyl methacrylate) (PMMA) composites were synthesized by solvent casting method using tetra hydro furan as a solvent, with in situ nonaqueous ‘sol-gel’ transformation involving the mixing of titanium isopropoxide (as sol-gel precursor) and methanol. The present research work is focused at studying the effect of titania loading on optical and mechanical behavior of transparent nano hybrid thin films. The effect of nano Titanium dioxide (TiO₂) loading on PMMA morphology was studied by using a scanning electron microscope (SEM). Bowl shaped structures were obtained in pure PMMA thin film, which were deformed on incorporation of TiO₂ nanoparticles. This nanocomposite exhibits enhanced optical and mechanical properties. The peak of UV absorption is blue shifted to 261 and 266?nm with the incorporation of TiO₂. At this wavelength, the absorption is increased up to approximately 397%. The nanocomposites exhibit increased tensile strength up to 40% and modulus up to 16%. Tg of PMMA increased from 84.8 to 86.7?°C on adding 1.25% TiO₂ nanoparticles.     

Effect of interfacial alloying on the surface plasmon resonance of nanocrystalline Au-Ag multilayer thin films

Nanocrystalline Au and Ag in multilayer thin film form with Au/Ag/Au structure were prepared by high pressure (∼40 Pa) d.c. sputtering techniques. The Ag concentrations in Ag_xAu_1-x films were changed from x = 0 to 1. These multilayer films with varying Ag concentration showed significant changes in microstructures obtained from TEM and XRD analyses. The optical absorption spectra of these multilayer films showed a single plasmon band confirming the formation of Au-Ag alloy. We ascribe this alloying to the interfacial reactions in nanophase limited at the Au-Ag interface. The red-shift and broadening of the plasmon bands with the increase in silver concentration could be associated to the increase in size of the nanoparticles and its distribution. The observed red shift in the plasmon band may be associated with the change in electronic structure at the Au-Ag interface due to configuration mixing of the atomic energy levels of Au and Ag. Received 17 October 2002 / Received in final form 26 February 2003 Published online 23 May 2003 RID="a" ID="a"e-mail: msakp@mahendra.iacs.res.in     

Spatially controlled dissolution of Ag nanoparticles in irradiated SiO2 sol-gel film

In this paper, we report the spatially controlled dissolution of silver nanoparticles in irradiated SiO₂ sol-gel films. The Ag nanoparticles have been formed in the sol-gel solution before the film deposition by adding Triton and ascorbic acid and also after the film deposition using a heat treatment at 700 °C for few minutes or at 550 °C for 6 h in reducing atmosphere. Using a spectrometer, a new view white light interferometer and a micro-thermal analyzer, we demonstrate that the silver nanoparticles can be dissolved using a continuous black ray UV lamp or with a near-infrared (NIR) femtosecond laser, due to a significantly increase in the local temperature. We confirm that the micro-thermal analyzer can be used as a new tool to study the dissolution of metallic nanoparticles in thin film if located at the surface of the films.     

Super-hydrophilic properties of TiO2-DLC nanocomposite films fabricated by the simple electrochemical process

Anatase TiO₂ nanoparticles incorporated DLC films were successfully deposited on single crystalline silicon substrates by the electrolysis of TiO₂-methanol solution under ambient atmospheric pressure and low temperature. Anatase TiO₂ nanoparticles were embedded into amorphous carbon matrix, forming the typical nanocrystalline/amorphous nanocomposite films, confirmed by transmission electron microscopy (TEM). TiO₂ incorporation effectively increased the sp³-hybridized carbon concentration in the composite film, and further regulated the microstructure and surface morphology. Furthermore, the static contact testing completely displayed, TiO₂ incorporation got the composite films super-hydrophilic, which fundamentally improved the wetting ability of DLC film.