The Synthesis and Characteristics of Vanadoaluminosilicate MCM-41 Mesoporous Molecular Sieves

A series of vanadoaluminosilicate MCM-41 mesoporous molecular sieves with various compositions have been hydrothermally synthesized. Hexadecyltrimethylammonium bromide was used as a surfactant in the synthesis. The samples were characterized with nitrogen sorption, X-ray diffraction, differential thermal analysis, thermogravimetric analysis, Fourier transform-Infrared spectroscopy, UV-visible spectroscopy, scanning electron microscopy, transmission electron microscopy, and solid state NMR. The solid products had the MCM-41 structure and contained only atomically dispersed vanadium and aluminum consistent with framework vanadium and aluminum. The samples were hydrophobic and contained large amount of surfactant in the as-synthesized samples. The surfactant could be removed upon calcination at 450°C. N₂ sorption measurements and TEM demonstrate the high mesoporosity of [V, Al]-MCM-41. The incorporation of vanadium and aluminum into MCM-41 decreased the surface area to some extent. The morphologies of all the samples were the agglomerate of plates. ²⁹Si MAS NMR shows that the pore wall is amorphous. ²⁷Al MAS NMR shows that all of aluminum species were tetrahedrally coordinated even after calcination at 550°C.     

Synthesis and Characterization of Ce-Containing MCM-41

SUMMARY. The cerium-containing MCM-41 (Ce-MCM-41) has been synthesized with size in the micrometer range by direct hydrothermal method. Transmission electron microscopy shows the regular hexagonal array of uniform channel characteristics of MCM-41. Five peaks were detected in the lov-angle XRD patterns,an interplanar spacing d100 = 40.6 A was obtained that can be indexed on a hexagonal unit cell with a0 = 46.9 A. Nitrogen adsorption isotherm at 77 K revealed a surface area of 920 m2/g, pore size of 26.2 A and wall thickness of 18.1 A. A cell contraction of 2.6 A upon calcination was observed. The spectroscopic studies indicate that the synthesized sample is with MCM-41 structure and Ce is in the framework position. A weak Lewis acidity was indicated by infrared spectra of pyridine adsorption. The synthesized Ce-MCM-41 exhibits fairly catalytic activity for the NO reduction by CO.     

萘普生在介孔分子筛MCM-41中的负载及其溶出性能

用含氨基的偶联剂修饰介孔分子筛MCM-41的表面,将修饰前和修饰后的介孔分子筛分别负载难溶性药物萘普生（NAP）,利用X射线衍射、傅里叶变换红外光谱、差示扫描量热分析、扫描电子显微镜、透射电子显微镜和N2吸附 脱附分析等技术分别对其进行了结构表征和性能测试。 结果表明,药物分子存在于分子筛的孔道中。 负载在MCM-41中的萘普生溶出速率远优于原料药,60 min时大约溶出70%。 氨基修饰后的药物释放速率比修饰前有所减慢,表明可通过氨基修饰调节释放速率。     

AlMCM-41介孔分子筛的合成及表征

以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.     

Tetra-β-(2-(diethylamino)ethoxy) nickel phthalocyanine: synthesis and inclusion in MCM-41

In order to include phthalocyanine macromolecule in MCM-41 molecular sieve, a inclusion-suitable phthalocyanine derivative tetra-β-(2-(diethylamino)ethoxy) nickel phthalocyanine was synthesized, in two steps, from 4-nitrophthalonitrile and 2-(diethylamino)ethanol, and characterized by mass spectra, ¹H nuclear magnetic resonance spectroscopy, ultraviolet visible spectroscopy, infrared spectroscopy and elemental analysis, which confirmed the proposed molecular structure. The inclusion of synthesized phthalocyanine compound in MCM-41 was carried out by the in situ synthesis method using cetyltrimethyl ammonium bromide as structure template and tetraethyl orthosilicate as silica source in presence of this phthalocyanine compound. The inclusion material was studied by means of X-ray diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, nitrogen adsorption isotherm measurements, etc. Results showed that the macromolecular compound was successfully included into MCM-41, the obtained inclusion material displayed mainly prisms and globes, and the material was a kind of mesoporous materials with regularly hexagonal honeycomb array of uniform cylindrical pores and high surface area.     

含钴介孔分子筛催化热解乙醇制备纳米碳管

以CTAB为模板剂,硅酸钠、氯化钴为原料,通过水热法合成含钴介孔分子筛(Co-MCM-41)。以所合成的Co-MCM-41做催化剂,采用化学气相沉积(CVD)法催化热解乙醇制备纳米碳管。通过XRD、FT-IR、TEM、N2吸附-脱附和Raman光谱等分析手段对所合成的介孔分子筛和纳米碳管进行了表征。结果表明:合成的Co-MCM-41样品具有MCM-41的介孔结构,比表面积较大且介孔有序性较好。以所合成的含钴介孔分子筛催化热解乙醇制备出管径均匀、管壁较厚、顶端开口的多壁纳米碳管。     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

Characterizations and Catalytic Properties of V-MCM-41 Synthesized by Template-ion Exchange Method

Much attention has been paid to the use of the new mesoporous material, MCM-41,as catalyst or catalyst support^[1,2]. Recently, we focus our study on the design of catalytically active sites such as vanadium species inside the mesopore of MCM-41. V-MCM-41 is generally synthesized by direct hydrothermal method in the literature, but a large part of vanadium sites seems difficult to be accessed during the catalytic reactions by this method. We have developed a novel method to introduce vanadium species by a template-ion exchange (TIE) method, i.e., by exchanging the template cation in the uncalcined MCM-41 with VO²⁺ ion in aqueous solution. Here, the results of the characterizations of such synthesized V-MCM-41 and its catalytic properties in oxidative dehydrogenation of propane are described.     

MCM-41分子筛担载纳米TiO2复合材料光催化降解罗丹明B

采用溶胶-凝胶法将TiO2担载在介孔MCM-41分子筛上, 制备了不同TiO2含量的系列TiO2/MCM-41复合材料, 利用X射线衍射、N2吸附、紫外-可见光谱和透射电镜等方法对其进行表征. TiO2的晶型为锐钛矿相, 复合材料的比表面积和孔体积随其中TiO2担载量(复合材料中TiO2与MCM-41的质量比)的增加而减小, TiO2的平均粒径随其担载量的增加而增大. 以罗丹明B的光催化降解为探针反应, 评价了TiO2/MCM-41复合材料的光催化降解活性. 结果表明, 在紫外光照射下, 罗丹明B在该复合材料上的光催化降解反应遵循一级反应动力学, 复合材料对罗丹明B的光催化降解活性明显高于商用TiO2 (P-25), 复合材料的光催化降解活性由复合材料的吸附能力和所含TiO2的光催化活性共同决定.     

介孔分子筛MCM-41表面的有机胺功能化及其应用

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛MCM-41进行了有机胺功能化.并对其进行了表征.XRD、比表面积测定、元素分析、TG、FT-IR和TEM的测定结果均表明,MCM-41表面成功地接枝上了有机胺功能基团而六方结构特征基本保持.在有机胺功能化的MCM-41上固载Ru基催化剂,并将其用于CO2加H2合成HCOOH反应,所显示的活性优于相应的均相催化剂,并且该催化剂具有较好的回收再用性能.     

Characterization of CoMCM-41 mesoporous molecular sieves obtained by the microwave irradiation method

CoMCM-41 mesoporous molecular sieves with different amounts of cobalt were synthesized via the microwave irradiation method. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), temperature programmed reduction (TPR), transmission electron microscopy (TEM) and N₂ adsorption-desorption technique, and thermal and hydrothermal stabilities of synthesized CoMCM-41 samples were also investigated. Results show that these synthesized materials have typical mesoporous structure of MCM-41. Also, specific surface area and pore volume of synthesized CoMCM-41 decrease with increasing amount of cobalt added, and mesoporous ordering also decreases. When the molar ratio of SiO₂:CoO in the starting material is 1.0:0.05, mesoporous ordering of synthesized CoMCM-41 is the best among the four doping contents. On the other hand, results of thermal and hydrothermal tests show that CoMCM-41 after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 5 days still retains mesostructure. However, mesoporous framework is entirely damaged after calcination at 850 °C for 3 h.     

Co掺杂ZnO/MCM-41分子筛的制备及对异戊醇的催化氧化性能

以Co掺杂的介孔分子筛MCM-41为载体, 采用等体积浸渍法制备了系列5%ZnO/xCo-MCM-41催化剂, 并用于催化分子氧氧化异戊醇合成异戊醛的反应. 通过X射线衍射(XRD), 傅里叶变换红外光谱(FTIR), 紫外-可见漫反射光谱(UV-Vis DRS), 扫描电子显微镜(SEM), 氨气程序升温脱附(NH₃-TPD), 氢气程序升温还原(H₂-TPR)和氮气吸附-脱附等手段对样品进行表征, 并考察了Co掺杂量对分子筛结构和催化性能的影响. 结果表明, 随着Co掺杂量的增大, 样品的比表面积和孔体积均减小, 而其平均孔径呈先增大后减小的趋势. 当Co掺杂量为0.05时, 5%ZnO/0.05Co-MCM-41仍保持了MCM-41高度有序的六方介孔结构, 具有高比表面积(989 m²/g)、较大孔径(2.88 nm)和孔体积(0.88 cm³/g), 引入的Co主要以孤立态钴离子[Single-site Co(Ⅱ)]形式存在于MCM-41骨架, MCM-41骨架中的Co可以有效提高ZnO微粒的分散度, 适度降低5%ZnO/MCM-41的表面酸性, 并大幅度提高5%ZnO/MCM-41的氧化还原性. 与5%ZnO/MCM-41相比, 5%ZnO/0.05Co-MCM-41可使异戊醛的选择性提高28.3%.     

以十六烷基三甲基溴化铵为模板剂合成MCM-41/ZSM-5复合分子筛的研究

采用阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)为模板剂、以ZSM-5为晶种,在水热晶化条件下合成了同时具有微孔和介孔的MCM-41/ZSM-5复合分子筛;并考察了陈化温度、陈化时间、晶化时间及模板剂用量等条件对合成复合分子筛的影响.通过X射线衍射、扫描电镜、高分辨率透射电镜、红外光谱及N2静态吸附法等手段对合成样...     

Synthesis, characterization, and catalytic properties of stable mesoporous molecular sieve MCM-41 prepared from zeolite mordenite

Mesoporous molecular sieves (denoted as M-MCM-41) with ordered hexagonal structure have been successfully synthesized from the assembly of precursors from preformed zeolite Mordenite with CTAB surfactant micelle in alkaline media. The samples were characterized by XRD, N₂ adsorption, IR and DTG. The materials exhibit highly hydrothermal stability, as compared with conventional MCM-41. Characterization results indicate that the mesoporous walls of M-MCM-41 contain the secondary building units similar to those in microporous crystal of zeolite Mordenite. In catalytic dealkylation of C10⁺ aromatic hydrocarbon, M-MCM-41 shows higher activities in comparison with Mordenite and MCM-41, which would be ascribed to the combination of advantages of both MCM-41 (large pores) and Mordenite (strong acidity). Furthermore, this synthesis strategy could be used as a new general method for the preparation of hydrothermally stable mesoporous aluminosilicate materials under alkaline conditions.     

超声波合成介孔分子筛

介孔分子筛MCM鄄41自问世以来一直是材料研究的热门领域之一[1,2],目前报道的主要合成方法有水热合成法[3,4]、微波法[5,6]等。其中水热法反应时间长达3~5d,耗能大,不利于实用化生产。超声波化学又称声化学,是一门新兴的交叉学科。超声波的波长远大于分子尺寸,因而不能对分子直     

以离子液体为结构导向剂合成有序超微孔二氧化硅

在酸性条件下, 以1-十六烷基-3-甲基溴化咪唑为表面活性剂合成了具有有序超微孔结构的二氧化硅材料, 所合成的材料具有较高的比表面积和二维六方有序的孔结构, 样品的孔径尺寸为1.8 nm.     

(MCM-41)-La_2O_3纳米复合材料的制备、表征及光学性质

借助水热法,以正硅酸乙酯为硅源,十六烷基三甲基溴化铵为模板剂,在碱性条件下制备了纳米MCM-41分子筛。通过固相热扩散法将La2O3组装到MCM-41介孔孔道中,制备出含La2O3不同浓度的(MCM-41)-La2O3主-客体纳米复合材料。采用化学分析、粉末XRD、FTIR、77K低温N2吸附-解吸附、固体扩散漫反射吸收光谱、拉曼光谱、扫描电镜和发光光谱对主-客体复合材料进行表征。粉末XRD结果表明,La2O3组装到MCM-41分子筛的孔道后并未破坏分子筛骨架,在所制备的(MCM-41)-La2O3主-客体纳米复合材料中MCM-41骨架结构仍然具有较高的有序性,并且,随着植入客体材料浓度的增加复合材料的有序度有所降低。红外光谱表明所制备的纳米复合材料主体分子筛骨架完好;低温氮气吸附-解吸附技术表明La2O3已经部分地占据了MCM-41分子筛孔道,导致分子筛的比表面积和孔体积都有所降低;固体扩散漫反射吸收光谱表明吸收光谱的吸收峰发生了蓝移现象,并表现出量子限域效应,说明La2O3已经组装到了MCM-41分子筛的孔道中;拉曼光谱表明所制备的复合材料没有出现新的特征峰,表明La2O3已经组装到了MCM-41分子筛的孔道中;扫描电镜表明(MCM-41)-La2O3样品的外观非常规整,主要呈现的是球状结构,La2O3含量为10%时,(MCM-41)-La2O3的平均粒径为(114±10)nm。发光光谱研究结果表明,所制备的复合材料(MCM-41)-La2O3样品在396nm处具有较好的发光性质,因而具有作为发光材料潜在应用前景。     

An efficient green catalyst comprising 12-tungstophosphoric acid and MCM-41: synthesis characterization and diesterification of succinic acid,a potential bio-platform molecule

An efficient green catalyst comprising 12-tungstophosphoric acid (TPA) and MCM-41 was synthesized. The catalytic activity was evaluated for liquid phase solvent free diesterification of succinic acid. The support and the synthesized catalyst were characterized by various physico-chemical techniques. Fourier transform infrared, diffuse reflectance spectroscopy, and ³¹P NMR spectra indicate that the Keggin structure of TPA was not destroyed after anchoring to MCM-41. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that TPA is uniformly dispersed inside the channels without disturbing the hexagonal array of MCM-41. The present contribution reports solvent free diesterification of succinic acid with alcohols under mild reaction conditions. The catalyst shows higher activity toward diester, especially for dioctyl succinate 99% yield was obtained with very high turnover number, 12.43×10⁴. Also the catalyst shows potential of being used as recyclable catalytic material after simple regeneration without loss of any catalytic activity.     

高钒掺杂量MCM-41合成及表征

采用溶胶-凝胶法,在氨性条件下合成出高钒掺杂量介孔MCM-41。以XRD,氮气吸附/脱附,透射电镜,ICP和拉曼光谱等技术对材料的结构进行了表征。结果表明当钒硅物质的量的比达到0.14时材料仍保持规整介孔结构(尽管当钒/硅物质的量的比超过0.11时开始有V₂O₅晶体出现)。所合成材料室温下在苯的过氧化氢直接羟基化反应中表现出良好的催化性能。     

苯官能化MCM-41的合成、表征、磺酰化及与二胺的反应

以三乙氧基硅基苯((C₂H₅O)₃Si-Ph，（(triethoxysilyl)benzene，TESB)以及正硅酸乙酯（TEOS）的混合液为硅源，以溴代十六烷基吡啶(CPBr)为模板剂，在HCl介质中合成了苯官能化的有机-无机杂化介孔分子筛MCM-41。对合成的分子筛用FT-IR、PXRD、TEM、N₂吸附-脱附等手段进行了表征。结果表明，合成的苯官能化的有机-无机杂化介孔分子筛具有良好的介孔孔道结构。用三甲基氯硅烷对分子筛表面的Si-OH进行了封端处理，用氯磺酸对合成的苯官能化的有机-无机杂化介孔分子筛进行了磺酰化，并与各种二胺进行了反应。