单圈图的最大特征值的上界的改进

Let G（V, E） be a unicyclic graph, Cm be a cycle of length m and Cm G, and ui ∈ V（Cm）. The G - E（Cm） are m trees, denoted by Ti, i = 1, 2,..., m. For i = 1, 2,..., m, let eui be the excentricity of ui in Ti and ec = max{eui ： i = 1, 2 , m}. Let κ = ec＋1. Forj = 1,2,...,k- 1, let δij = max{dv ： dist（v, ui） = j,v ∈ Ti}, δj = max{δij ： i = 1, 2,..., m}, δ0 = max{dui ： ui ∈ V（Cm）}. Then λ1（G）≤max{max 2≤j≤k-2 （√δj-1-1＋√δj-1）,2＋√δ0-2,√δ0-2＋√δ1-1}. If G ≌ Cn, then the equality holds, where λ1 （G） is the largest eigenvalue of the adjacency matrix of G.     

逆周期的交换半群生成的簇的子簇

In this paper, all subvarieties of the varieties Ak （k ∈N） generated by aperiodic commutative semigroups are characterized. Based on this characterization, the structure of lattice of subvarieties of Ak is investigated.     

树的最大特征值的上界的一个注记

设T是一个树,V是T的顶点集．记dv是υ∈V的度,△是T的最大顶点度．设υ∈V且dw=1．记k=ew+1,这里ew是w的excentricity．设δj′= max{dυ:dist(υ,w)=j},j=1,2,…,k-2,我们证明和这里μ1(T)和λ1(T)分别是T的Laplacian矩阵和邻接矩阵的最大特征值．特别地,记δo′=2．     

不同的公理不同的几何

一位语文老师在博客上写反思.他在教《自相矛盾》这则寓言时,有学生站起来反驳:有这么傻的人么?太不可信了吧.面对这样大胆质疑的学生,这位老师不知如何处理为好! 现在的学生比以前更敢想敢做了.     

自由群的直积的检验元素的注记

本文研究了自由群的直积的检验元素,通过对直积的自同态的分解,得到了直积中的元素为检验元素的充分必要条件,改进了O'neill和Turner的结果.此外,构造了两类具体的检验元素.     

乘方的指数与其幂的位数的关系

为了探究乘方的指数与其幂的位数的关系,定义了几个有关的新概念,并且证明了两个关于乘方以及进制进位的定理,由此建立起关于乘方以及进制进位的理论体系,其中包括进位理论中判定乘方的指数与其幂的位数是否存在周期规律的判别法,以及进位规律的求解法和四条相关的性质.     

计算Hamilton矩阵特征值的一个稳定的有效的保结构的算法

提出了一个稳定的有效的保结构的计算Hamilton矩阵特征值和特征不变子空间的算法,该算法是由SR算法改进变形而得到的。在该算法中,提出了两个策略,一个叫做消失稳策略,另一个称为预处理技术。在消失稳策略中,通过求解减比方程和回溯彻底克服了Bunser Gerstner和Mehrmann提出的SR算法的严重失稳和中断现象的发生,两种策略的实施的代价都非常低。数值算例展示了该算法比其它求解Hamilton矩阵特征问题的算法更有效和可靠。     

多维的一般的BBM-Burgers方程解的逐点估计

研究R~n中一般的BBM-Burgers方程解的渐进行为.运用Green函数法和Fourier分析方法得到了在非零常状态u~*附近小扰动解的逐点估计,作为一个推论,又得到了L~p(R~n)(1≤p∞)空间解的最佳的衰减估计.     

Lindelf的工作与Chaplygin的工作的互补性

运用Vakonomic模型导出Lindel f方程 ,表明Lindel f的工作与Vakonomic模型相吻合 ;运用Chetaev模型导出Chaplygin方程 ,表明Chaplygin的工作与Chetaev模型相吻合·　在此基础上 ,通过改进Chaplygin方程和Lindel f方程的表示形式 ,实现了从Lindel f方程向Chaplygin方程的合理过渡和从Chaplygin方程向Lindel f方程的合理的过渡·　最后 ,给出一个典型实例·　结果表明 ,正如Vako nomic模型与Chetaev模型是互补的一样 ,Lindel f的工作与Chaplygin的工作也是互补的·     

相同的性质不同的表述

文[1]《2010年四川卷理科20题的引申》一文给出并证明了这样一个性质(表述1.1),这里以焦点在x轴上的椭圆为例.     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

基于产品生命周期的闭环供应链定价和协调策略研究

研究产品生命周期条件下一个制造商、一个零售商组成的闭环供应链的定价和协调策略:制造商第一周期只生产新品,从第二周期开始生产再制造品,并负责回收。建立了两周期、多周期和无限周期下的分散决策模型和多周期下的集中决策模型,得到最优定价和生产策略。结果表明:两周期中,制造商和零售商应根据不同的成本节约额制定不同的批发价、零售价和生产量。多周期中,当成本节约额比较小时,除第一和最后一个周期外,制造商和零售商应采取相同的定价和生产策略;当成本节约额比较大时,除第一和最后两个周期外,制造商和零售商应采取相同的定价和生产策略。无限周期中,除第一周期以外,制造商和零售商都应该采取相同的定价和生产策略。在有限周期情况下,制造商和零售商应通过在前期制定比较低的批发价和零售价,以提高生产量和销售量,使得后期的回收量增大,达到降低成本的目的。通过引入收益共享契约制定合适的批发价和销售收入及再制造收益共享比率可以协调整个闭环供应链。算例验证了上述结论。     

非线性优化方法在大气和海洋科学数值研究中的若干应用

控制大气和海洋运动的模式是复杂的非线性模式,在考虑到线性奇异向量和线性奇异值只能描述切线性模式有效时段内小扰动发展的情况下,介绍了作者们近年来用非线性优化方法数值研究大气和海洋科学的有关工作,其中包括非线性奇异向量和非线性奇异值、条件非线性最优扰动、以及它们在数值天气和气候可预报性研究中的应用．结果表明,上述非线性优化方法在很大程度上揭示了大气和海洋运动的非线性特征;此外,对可预报性问题的新分类也做了详细介绍,即最大可预报时间、最大预报误差和最大允许初始误差A·D2这种分类的应用背景是针对数值天气预报和气候预测产品的评价;最后,讨论了数值模式敏感性分析的非线性优化方法,该方法在一定条件下可以定量识别模式误差和初始误差,量化判断数值模式的模拟能力．     

复杂装备研制协调超网络均衡与实现路径

复杂装备研制主体间呈现社会关系、合作关系、协调关系等网络关系,并且相互影响相互作用,其影响复杂装备研制的重要参数。为有效描述在资源环境约束下制造商和供应商的关系,探讨复杂装备研制协调机理与实现路径,本文利用超网络方法,设计了相互影响、相互作用的社会关系网络、协调网络和合作网络的复杂装备研制协调超网络,并将社会关系水平、协调度和合作水平作为超网络的3个决策变量,建立基于关系价值最大、协调成本最低、协调风险最小、合作收益最大、合作风险最小和成本最小等不同偏好下的多目标最优决策模型,构建了复杂装备研制超网络均衡模型,并利用其探讨超网络均衡和实现路径。     

金融风险在股票市场的传染效应及联动行为分析

近年来金融危机频发并表现出了易传染性,引起了众多学者的高度关注。以动态条件相关模型研究美欧股市与中、日、韩股市间的时变相关性,并结合内生多重结构突变模型划分危机传染阶段,选用溢出指数模型分析股市间的风险溢出特性;随后,定义股市间相互影响的联动模式并构建不同传染阶段的加权有向网络图分析股市间的联动行为。研究表明:美欧股市对中日韩股市有明显的传染效应,被传染的速度和持续时间均不相同;金融传染和风险溢出展现出一定的不一致性,危机期间日股的风险溢出效应强于美股;传染效应在联动网络中表现为联动模式的高聚类性和高联动性,相比欧债危机,次贷危机时期股市间展现出更强的联动行为;日股与美欧股市在两次危机中均表现出最强的联动性,其所受影响也最大。     

A 3D modeling of static and forward smoldering combustion in a packed bed of materials

A three-dimensional (3D) model based on the first principles of mass, momentum and energy was developed that numerically simulates the processes of static and forward smoldering in a porous packed bed of plant materials. The packed bed contains cellulose material or tobacco (cigarette) wrapped in a porous paper and surrounded by an ambient air. Other major characteristics of the model are including the effects of buoyancy forces in the flow field, separate treatment of solid and gas in a thermally non-equilibrium environment, and use of multi-precursor kinetic models for the pyrolysis of staring material and oxidation of char. The changes in porosity due to pyrolysis and char oxidation and the effect of porosity on the bed permeability and gas diffusivity are included. The mass, momentum, energy, and species transport equations are solved in a discretized computational domain using a commercially available computational fluid dynamics (CFD) code. The simulation results show that the model reasonably reproduces the major features of a burning cigarette during smoldering and puffing and are in a good agreement with the existing experimental results for cigarettes. Results include the velocity profiles, gas and solid temperatures, coal shape, burn rates, profile and transport of gas and vapor species throughout the packed bed, dilution through the wrapper paper and ventilation in the filter section, and the mass fraction of some pyrolysis and oxidation products in the mainstream and sidestream flows.     

考虑服务和退货的双渠道供应链定价问题研究

在考虑零售服务和消费者退货情况下,运用两阶段优化方法分别探究了集中式和分散式两种双渠道供应链的最优定价策略。研究发现零售服务有助于提高零售商的渠道权力,并始终使制造商获益,但只有当服务水平小于某一临界值时,才使制造商和零售商同时得到帕累托改进。零售价格和直销价格与退货率正相关,而与服务水平的关系受渠道结构的影响。服务水平的提高加剧了供应链的“双重边际化”效应,制造商通过生产与消费者需求相匹配的产品来降低退货风险可以减弱这种效应,从而提高供应链效率。     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

雾霾天气治理与中原经济区城镇化关系实证研究

随着城镇化率的提高,雾霾天气也逐渐增多.雾霾严重影响着社会生产和人们生活,其主要来源是燃煤和汽车尾气.通过借鉴欧美治理雾霾的经验,并利用熵值法评价雾霾与城镇化的关系,确定各指标对雾霾的影响权重,并依据计算结果提出相应的对策措施.