农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

不同功能单体合成的谷胱甘肽分子印迹聚合物的研究

采用分子印迹技术, 以谷胱甘肽为模板分子, 以丙烯酰胺、甲基丙烯酸为功能单体制备分子印迹聚合物; 通过静态吸附试验, 探讨了合成分子印迹聚合物时模板分子与功能单体的物质的量比、上样液pH 值、吸附平衡时间、上样液浓度对聚合物吸附性能的影响; 实验结果表明: 以丙烯酰胺、甲基丙烯酸为功能单体制备谷胱甘肽分子印迹聚合物时,谷胱甘肽与丙烯酰胺、甲基丙烯酸的最适摩尔比分别为1:5 和1:4, 以及最适静态吸附条件为: 上样液pH 值分别为3.0 和5.0 左右; 上样液浓度分别为1.50～2.00 g/L 和1.00～1.50 g/L; 静态吸附平衡时间为18 和20 h 左右. 同时也探讨了分子印迹聚合物对谷胱甘肽结构类似物的吸附性能, 结果表明, 所合成的分子印迹聚合物对谷胱甘肽具有良好的选择性吸附能力. 同时也研究了分子印迹聚合物对酵母抽提物中谷胱甘肽的吸附性能, 以丙烯酰胺和甲基丙烯酸为功能单体制备的分子印迹聚合物对混合体系中谷胱甘肽的一次性提取率分别为41%和77%. 分子印迹聚合物均表现出了较好的吸附特性, 为分离提纯谷胱甘肽提供一种可选择的途径.     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

药物扑热息痛分子模板聚合物的选择性富集与识别特性研究

采用分子印迹技术合成了对药物扑热息痛有高选择性的模板聚合物。通过Ｓｃａｔｃｈａｒｄ分析研究了模板聚合物的结合特性;研究了模板聚合物的结合动力学。结果表明,以丙烯酰胺为功能单体的模板聚合物比以甲基丙烯酸为功能单体的聚合物具有更高的结合容量。     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

香豆素分子模板聚合物的合成与性能研究

以香豆素为模板分子, α-甲基丙烯酸(MAA)、丙烯酰胺(MA)、2-乙烯基吡啶(2-VP)和4-乙烯基吡啶(4-VP)为功能单体, 二甲基丙烯酸乙二醇酯(EGDMA)为交联剂, 利用分子模板技术分别在甲苯、甲醇、氯仿和乙腈溶剂中合成了一系列香豆素分子模板聚合物(MTP), 研究了聚合体系组成对模板聚合物吸附特性的影响. 结果表明, 在所合成的模板聚合物中, 以MAA为功能单体, 乙腈为致孔溶剂, 以1∶4∶30的摩尔比加入模板分子、MAA及EGDMA时制备的模板聚合物吸附容量高、印迹效果和选择性好. 此模板聚合物有作为白芷样品中香豆素吸附分离材料的应用前景.     

左氧氟沙星印迹聚合物微球及其特异吸附研究

以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了左氧氟沙星印迹聚合物(MIP)微球,用SEM和IR分别对微球形貌和结构进行表征,用静态吸附法和Scatchard分析考察了聚合物微球对模板及其结构类似物的吸附行为和选择性识别能力.结果表明,MIP对模板分子的吸附平衡速度快,40min即可达到吸附...     

乙酰水杨酸分子印迹聚合物的合成及性能研究

采用分子印迹技术,以乙酰水杨酸为模板分子,1,4-二乙烯基苯为交联剂,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,合成了对乙酰水杨酸具有特异性吸附能力的两种分子印迹聚合物;它们对乙酰水杨酸都存在两类不同亲和性的结合位点,其中用丙烯酰胺合成的分子印迹聚合物对模板分子乙酰水杨酸的氢键作用力和结合能力都比用α-甲基丙烯酸合成的聚合物强。这对分子印迹技术用于环境、血液等复杂样品中乙酰水杨酸的分离和富集具有重要意义。     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

分子印迹聚合物的制备及其对香草醛的吸附行为

以香草醛为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂,制备了香草醛分子印迹聚合物(MIP);研究了以不同致孔剂合成的MIP在水溶液中对香草醛的吸附行为.结果表明,以乙腈为致孔剂合成的MIP对香草醛具有较高的识别特性,能较简便地用于香草醛的分离和富集.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.