钻井液用交联-接枝淀粉的制备及性能

以N,N′-亚甲基双丙烯酰胺为交联剂,过硫酸铵为引发剂,采用“溶剂法”工艺合成了高粘度抗剪切丙烯酸钠接枝淀粉(St),考察了单体、引发剂和交联剂用量、丙烯酸中和度、反应时间及反应温度对合成交联丙烯酸钠接枝淀粉糊液粘度的影响。 结果表明,其优化反应条件为：m(淀粉)∶m(丙烯酸）=1∶1.5,乙醇质量分数为80%,过硫酸铵的用量为单体总质量的1%,交联剂为单体总质量的0.6%,反应时间2.5 h,反应温度为55 ℃,丙烯酸中和度为70%。 该交联接枝淀粉糊液具有良好的触变性,在4%盐水泥浆中的添加量为14.0 g/L时,表观粘度为26.0 mPa·s,滤失量为7.2 mL;在饱和盐水泥浆中添加量为23.5 g/L时,表观粘度为54.5 mPa·s,滤失量为3.1 mL;在80 ℃高温下老化16 h其表观粘度及滤失量等性能基本保持不变,表现出良好的增粘、降失水作用和抗盐、抗老化性能。     

乙烯基三甲氧基硅烷与丙烯酸环氧树脂二元共聚物的合成

以丙烯酸环氧树脂(AE)和乙烯基三甲氧基硅烷(VTMS)为单体,通过溶液聚合法制备了含有机硅氧烷的二元共聚物溶液(AE-VTMS),其结构经IR表征.制备AE-VTMS的最佳反应条件为:AE61g,m(AE)∶m(VTMS)=6∶1,w(甲苯)=40%,w(引发剂)=7‰,于85℃聚合3h.在此条件下,转化率达62.98%.     

反相悬浮法制备AA-AM共聚耐盐高吸水性树脂

对反相悬浮法制备丙烯酸 (AA)和丙烯酰胺 (AM)二元共聚高吸水性树脂的工艺进行了研究。实验表明 ,该工艺的最佳条件为 :AA 2 0g( 2 80mmol) ,n(AA)∶n(AM +AA) =0 .6 ,交联剂N ,N 亚甲基双丙烯酰胺的用量为单体总质量的 0 .2‰ ,引发剂过硫酸钾的用量为单体总质量的 0 .6‰ ,聚合温度 6 5℃ ,聚合时间 1.5h。AA -AM的吸水率为 12 5 0g·g-1,吸盐水率为 14 0g·g-1。     

泡沫聚合法制备超大多孔水凝胶

采用泡沫体系分散聚合法,过硫酸铵(APS)及N,N,N′,N′-四甲基乙二胺(TMEDA)为氧化还原引发体系,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,碳酸钠为发泡剂,聚氧化乙烯-氧化丙稀(PF127)为泡沫稳定剂,用羧甲基纤维素钠(CMC)接枝丙烯酸(AA)和2-丙烯酰胺基-2-甲基丙磺酸(AMPS)合成了CMC-g-(AA-co-AMPS)超大多孔水凝胶。通过FTIR、SEM表征,表明材料是具有超大多孔结构的CMC-g-(AA-co-AMPS)水凝胶。对各影响因素的研究表明,在m(CMC)∶m(AA)∶m(AMPS)为1∶4∶1,w(APS)为0.8%[其中m(APS)∶m(TMEDA)=2∶1],w(Na2CO3)=65%,w(PF127)=0.2%,温度为65℃时,制得的凝胶吸蒸馏水倍率可达1281g/g,吸0.9%盐水倍率达143g/g,10min时已基本达到溶胀平衡。     

甲基丙烯酸丁酯接枝纤维素的制备

为开发纤维素基吸油材料,以棉浆粕为基材、甲基丙烯酸丁酯(BMA)为单体、乙二醇二甲基丙烯酸酯为交联剂,采用悬浮接枝聚合法合成了BMA接枝纤维素的聚合物。采用红外光谱(FT-IR)、X射线衍射(XRD)、扫描电镜(SEM)、热重(TG)、差热(DSC)等手段对所得吸油材料结构进行了表征。考察了引发剂的种类及用量、接枝单体及交联剂用量、反应温度、反应时间等因素对BMA接枝纤维素聚合物的接枝聚合反应性能及吸油性能的影响。结果表明:当m(棉浆粕)∶m(K2S2O8)∶m(BMA)∶m(乙二醇二甲基丙烯酸酯)=1∶0.025∶1.5∶0.005,75℃下恒温反应6 h,合成的BMA接枝纤维素的接枝率最高(36.2%),均聚物含量相对较低(5.8%),且吸油性能优良。     

氧化淀粉基高吸水性树脂的制备及表征

以过硫酸铵为引发剂,N,N’-亚甲基双丙烯酰胺为交联剂,制备氧化淀粉―丙烯酸―丙烯酰胺高吸水性树脂,并采用红外光谱、X射线衍射等手段对产品的结构进行表征。通过单因素实验优化其制备工艺,最佳工艺条件为:氧化淀粉基体用量为50%,丙烯酸/丙烯酰胺质量比为4∶1,丙烯酸中和度为70%,引发剂过硫酸铵用量为0.5%,交联剂N,N’-亚甲基双丙烯酸胺用量为0.15%,反应温度为80℃,反应时间为3 h。此条件下,氧化淀粉基高吸水性树脂的吸水率达到972.4 g/g。     

淀粉-SMAS接枝共聚物的制备及其应用研究

以淀粉、甲基丙烯磺酸钠(SMAS)为主要原料,通过接枝共聚反应,合成了淀粉/甲基丙烯磺酸钠接枝共聚物(St-SMAS)。并进行了制备条件的优选实验,得出最佳条件为:m(淀粉):m(SMAS)=1:1,引发剂浓度为6.7 mmol/L,反应温度为50℃,反应时间为4 h,在上述工艺条件下,淀粉-SMAS接枝共聚物的接枝率为104.0%,接枝效率可达86.7%。红外光谱分析结果表明:St-SMAS接枝共聚物中除含有淀粉本身的特征基团外,还有磺酸基团,说明淀粉与甲基丙烯磺酸钠发生接枝反应。生活污泥脱水实验表明,St-SMAS脱水综合性能优于PAM。     

丙烯酸盐与丙烯酰胺共聚制备耐盐性高吸水树脂

以N,N-亚甲基双丙烯酰胺为交联剂,过硫酸铵-亚硫酸钠为引发剂,采用水溶液聚合法合成了耐盐性高吸水树脂-聚(丙烯酸钠-co-丙烯酰胺).研究了单体配比、丙烯酸中和度、引发剂及交联剂用量以及反应温度对常压及加压(1.96×103Pa)下吸盐水(wNaCl=0.009)率的影响.并对其结构进行了表征.该耐盐性高吸水树脂常压和加压下吸盐水率分别为50g·g-1和18 g·g-1,且凝胶强度好.     

微波法合成淀粉接枝丙烯酸盐类高吸水性树脂的研究

以N,N′-亚甲基双丙烯酰胺为交联剂、过硫酸铵为引发剂、在微波辐照下对淀粉接枝丙烯酸盐共聚进行了系统的研究,确定了最佳的反应条件,合成了粉末状的高吸水性树脂。并用FTIR和固体NMR等方法探讨了淀粉一丙烯酸盐接枝共聚物的结构特征。实验结果表明,利用微波技术合成淀粉一丙烯酸盐接枝共聚物可实现一次合成、干燥,简化合成工艺。淀粉与丙烯酸盐质量比为40／100左右时产物的接枝率最大,且吸水速率明显高于化学法合成的高吸水树脂。     

水葫芦基保水剂的制备

利用水葫芦中的纤维素,以过硫酸钾为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,采用复合引发剂体系制备出土壤改良用途的水葫芦基保水剂。考察了单体用量、引发剂用量和交联剂用量对保水剂的吸水吸盐性能的影响。结果表明,以水葫芦为原料,与单体AA进行接枝共聚制备水葫芦基保水剂的最优单体与纤维素的质量比为12∶1,最优引发剂KPS用量为单体质量的0.6%,最优交联剂NMBA用量为单体质量的0.12%,制得的树脂吸水吸盐性能最优。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.