共查询到20条相似文献,搜索用时 928 毫秒
1.
2.
以聚乙二醇甲基丙烯酸酯(PEGMA)为大分子引发剂进行ε-己内酯的酶催化开环聚合, 合成出嵌段共聚物, 然后将其转化成大分子引发剂型单体(Macroinimer), 最后通过原子转移自由基聚合(ATRP)制备出一种新型结构的嵌段型支化聚合物. 相似文献
3.
报道了一种制备二硫键连接的两嵌段共聚物的新方法.以可逆加成-断裂链转移自由基聚合(RAFT)制备聚苯乙烯大分子链转移剂(PS-RAFT),经伯胺还原得到巯基封端的PS(PS-SH).PS-SH与原子转移自由基聚合(ATRP)引发剂2-溴-2-甲基丙酸-2-(2-吡啶基二硫)乙酯发生交换反应,得到含有二硫键的聚苯乙烯大分子ATRP引发剂(PS-S-S-Br).以PS-S-S-Br引发甲基丙烯酸-2-羟基乙酯(HEMA)的ATRP聚合反应,合成了由二硫键连接的两嵌段共聚物PS-S-S-PHEMA.将PS-S-S-PHEMA可在甲醇中自组装形成以PS为核,PHEMA为壳的球形聚合物胶束,为制备新型含二硫键聚合物提供了新的合成方法. 相似文献
4.
5.
6.
可逆加成—断裂链转移自由基聚合在制备水溶性聚合物中的应用 总被引:1,自引:0,他引:1
水溶性聚合物在工业、农业、医药等领域都有着广泛用途,但随着近年对水溶性聚合物精细化的要求,寻找新的结构可控的聚合方法已成为迫切需求.由于可逆加成-断裂链转移(RAFT)自由基聚合具有适用单体范围广、反应条件温和、不受聚合方法的限制等优点,以及可控制聚合物的嵌段、接枝、梳型、星型、无规及梯度等结构,成为合成结构可控的水溶性聚合物的最有效手段之一.本文主要讨论了单体、引发剂、链转移剂、溶剂等组成对RAFT聚合反应的影响,并介绍了利用RAFT方法制备非离子、阴离子、阳离子及两性离子水溶性聚合物的实例. 相似文献
7.
高分子材料性能追本朔源主要由分子链微结构决定。以RAFT聚合为代表的"活性"/可控自由基聚合结合了传统自由基聚合和活性阴离子聚合各自的优点,提供了一种有效调控聚合物分子链微结构的聚合方法。RAFT乳液聚合作为"活性"/可控自由基聚合中具有工业应用前景的聚合方法,在过去二十年受到了学术界的广泛关注。本文总结了RAFT乳液聚合乳液失稳机理、聚合动力学、链结构的可控性等方面的进展。在此基础上,介绍了通过RAFT乳液聚合这一可控制备聚合物新材料的平台制备得到的新型嵌段共聚物、梯度共聚物,并展望了RAFT乳液聚合在高分子合成材料领域的应用前景。 相似文献
8.
嵌段共聚物是将不同性质的聚合物连接在同一分子内,表现出特殊的性质,受到高分子科学家及工业部门的广泛关注。本文简要介绍了嵌段共聚物的结构、性能以及可能的应用。它有多种制备方法,这里着重介绍近年来通过原子转移自由基聚合(ATRP)和可逆加成-裂解链转移(RAFT)法制备嵌段共聚物的研究现状和进展情况。对于加料顺序、大分子引发剂末端基团、单体的反应活性以及大分子引发剂的引发效率、配体种类、大分子链转移剂的链转移常数等对嵌段共聚反应的影响也进行了讨论。 相似文献
9.
遥爪聚合物因其聚合物链的两端带有反应性官能团,可用于制备嵌段、接枝、星形、超支化等具有特殊结构的聚合物,其制备方法主要包括传统自由基聚合与可控/“活性”自由基聚合、阴离子聚合、阳离子聚合、易位聚合和缩合聚合等。相比于其他的传统聚合方法,烯烃易位聚合是一种较为温和的、产物分子量及结构可控的聚合方法。本文主要概述在各种链转移剂的存在下,采用环烯烃的开环易位聚合(ring-opening metathesis polymerization, ROMP)和非环二烯易位(acyclic diene metathesis, ADMET)聚合制备带有各种官能团的遥爪聚合物以及与其他活性聚合方法(NMRP、ATRP、RAFT、ROP等)相结合制备嵌段共聚物的研究进展。 相似文献
10.
用大分子引发剂法制备嵌段共聚物 总被引:6,自引:0,他引:6
主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂.然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等.可制得结构可控、分子量分布窄的嵌段共聚物。 相似文献
11.
12.
Cline Farcet Julien Nicolas Bernadette Charleux 《Journal of polymer science. Part A, Polymer chemistry》2002,40(24):4410-4420
The controlled free‐radical homopolymerization of n‐butyl acrylate was studied in aqueous miniemulsions at 112 and 125 °C with a low molar mass alkoxyamine unimolecular initiator and an acyclic β‐phosphonylated nitroxide mediator, N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide, also called SG1. The polymerizations led to stable latices with 20 wt % solids and were obtained with neither coagulation during synthesis nor destabilization over time. However, in contrast to latices obtained via classical free‐radical polymerization, the average particle size of the final latices was large, with broad particle size distributions. The initial [SG1]0/[alkoxyamine]0 molar ratio was shown to control the rate of polymerization. The fraction of SG1 released upon macroradical self‐termination was small with respect to the initial alkoxyamine concentration, indicating a very low fraction of dead chains. Average molar masses were controlled by the initial concentration of alkoxyamine and increased linearly with monomer conversion. The molar mass distribution was narrow, depending on the initial concentration of free nitroxide in the system. The initiator efficiency was lower than 1 at 112 °C but was very significantly improved when either a macroinitiator was used at 112 °C or the polymerization temperature was raised to 125 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4410–4420, 2002 相似文献
13.
Kevin M. Burridge Nethmi De Alwis Watuthanthrige Camryn Payne Richard C. Page Dominik Konkolewicz 《Journal of polymer science. Part A, Polymer chemistry》2021,59(21):2530-2536
An enduring question is: what is the simplest and easiest way to obtain tailored polymers? This communication explores a robust photoiniferter polymerization with only two active ingredients that requires no prior deoxygenation and can be performed on the milliliter scale or sub-milliliter scale. Rather than leaving headspace in the polymerization vessel or scaling reactions up to fill the vessel, this approach fills the headspace of the reaction vessel with mineral oil or inert solvents. This approach can also be applied to polar monomers in aqueous media, using oil as the inert solvent, or to hydrophobic monomers with water as the inert solvent. This method removes enough ambient oxygen that the photoiniferter reaction proceeds with no deoxygenation step, and achieves high conversion and good molecular weight control in 10–20 h in both aqueous and organic solvents. Complex polymer architectures such as multiblock copolymers and gradient polymers were successfully synthesized by this approach. 相似文献
14.
15.
16.
17.
Reverse iodine transfer polymerization (RITP) is a new controlled radical polymerization technique based on the use of molecular iodine I2 as control agent. This paper aims at presenting the basics of RITP and the strategy that we have followed for the development of this process in the past three years, from the validation in homogeneous solution polymerization up to recent results in heterogeneous aqueous polymerization processes. Typical examples of RITP of butyl acrylate in emulsion and RITP of styrene in miniemulsion are discussed. 相似文献
18.
原子转移自由基聚合(ATRP)应用于乳液聚合体系的主要挑战在于如何同时保证乳液的稳定性和聚合反应的可控性。本文主要对乳液ATRP体系中影响聚合反应可控性和乳液稳定性的各种因素、乳液ATRP的机理和乳液ATRP的应用等方面进行了综述。表面活性剂亲水亲油性及其亲水亲油基团的化学性质、催化剂/配体在油/水两相之间的分配行为、引发剂的溶解性、反应温度以及各组分的浓度是影响反应可控性和乳液稳定性的主要因素。各组分在油/水两相中的分配行为使得乳液ATRP的机理比传统乳液聚合更加复杂。乳液原子转移自由基聚合结合了活性自由基聚合和乳液聚合的优点,在理论研究和工业生产上具有很大的应用前景。 相似文献
19.
20.
Xiaohong Liu Dr. Michael G. Debije Dr. Johan P. A. Heuts Prof. Dr. Albert P. H. J. Schenning 《Chemistry (Weinheim an der Bergstrasse, Germany)》2021,27(57):14168-14178
Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed. The particle sizes, molecular orientations, and liquid-crystalline phases produced by each technique are summarized and compared. We conclude with a discussion of the challenges and prospects of the preparation of liquid-crystalline polymer particles by classical polymerization techniques. 相似文献