开放骨架磷酸铝AlPO4-12的晶化过程

以乙二胺为结构导向剂,在200℃加热物质的量组成为n_Al2O3:n_P2O5:n_en:n_H2O=1:1:2:226的初始混合物(en=乙二胺),合成了三维开放骨架磷酸铝化合物AlPO₄-12。用X-射线衍射、元素分析、pH测量、液体核磁共振以及电喷雾质谱研究了其晶化过程。依据质谱数据,开发了一个系统枚举在晶化过程中可能生成的小结构单元分子式的方法。研究发现在AlPO₄-12的晶化过程中经历了层状磷酸铝UiO-15和UiO-13中间相,液相中Al物种的浓度极低,在晶化过程中生成的小结构单元中P-OH逐渐增多,乙二胺分子逐渐质子化,在晶化过程中生成了磷酸铝的4元环和6元环。用电喷雾质谱研究晶化过程中的液相可以获得小结构单元的结构和组成信息。     

二丙胺的结构微调对磷酸铝分子筛晶化过程影响的凝胶组成依赖性

以二丙胺异构体（二正丙胺DPA和二异丙胺D-iPA）为结构导向剂,在200℃加热2组反应原料物质的量之比不同的初始凝胶,合成出了高结晶度的磷酸铝分子筛AlPO₄-11。利用X射线粉末衍射分析、元素分析等表征手段,研究了凝胶的晶化过程和液相的pH值以及Al和P的浓度演化。初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.2：75时,以DPA为结构导向剂,晶化过程中无中间相生成,而以D-iPA为结构导向剂时,晶化过程中生成了具有12元环孔道结构的磷酸铝分子筛AlPO₄-5中间相;初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.0：75时,以DPA为结构导向剂,晶化过程中生成了具有18元环孔道结构的磷酸铝分子筛VPI-5中间相,而以D-iPA为结构导向剂时,晶化过程中同时出现了VPI-5及AlPO₄-5两种中间相。表明对于同一种有机胺,凝胶物质的量之比的改变影响了其结构导向效应。理论计算结果显示质子化的DPA及D-iPA中N原子上的电荷有差异,表明有机胺的结构微调影响其结构导向效应,但该影响依赖于凝胶组成。     

计算机模拟研究磷酸铝AlPO4-H3相转变

用分子动力学方法模拟研究了磷酸铝AlPO₄-H₃在高温下的相转变过程. 从磷酸铝AlPO₄-H₃的结构出发, 通过去除非骨架的H2O分子和改变骨架四元环中T原子的上下连接顺序, 设计出一系列磷酸铝AlPO₄-H₃高温相的理论模型. 通过对这些理论模型进行全局几何优化, 讨论了它们的结构特点和热力学稳定性. 模拟结果表明, 磷酸铝AlPO₄-H₃在能量上有利于转变为AlPO₄-C, 进而转变为AlPO₄-D及一些新型未知的三维磷酸铝骨架.     

类固相法快速合成高钙镁离子交换性能的P型分子筛

以硅铝干凝胶为硅源和铝源,氢氧化钠为碱源,采用类固相法快速合成了P型分子筛,并通过X射线衍射（XRD）、扫描电镜（SEM）等手段对产品进行了表征分析。结果表明,硅铝干凝胶的组成n_SiO2/n_Al2O3=5,晶化时间和晶化温度分别为3 h、140℃,原料的组成n_Na2O/n_SiO2、n_H2O/n_SiO2=18.51时,可制备形貌均一、结晶良好的P型分子筛产品。与传统水热法相比,该方法极大地减少了合成过程的用水量,缩短了晶化时间,提高了产品的钙镁离子交换性能,从整体上优化了P型分子筛的合成工艺。     

微波场中T型分子筛的合成及晶化研究

研究了微波场中T型分子筛的结晶过程。考察了微波加热体系中合成参数如合成时间、溶胶组成、反应压力和模板剂用量对分子筛晶化的影响。微波加热的主要优点是减少合成时间,无模板剂的溶胶在普通加热条件下的晶化时间需要120 h,而在微波场中则仅需要20～25 h。另一方面,由于微波的快速加热特性促进了稳定相钙十字沸石的生成,从而减小了次稳定相T型分子筛的结晶区间。在未添加模板剂条件时,100 ℃下微波水热合成T型分子筛的结晶区间为：20≤n_SiO2/n_Al2O3≤22和0.31≤ n_M2O/n_SiO2≤0.33(其中M₂O=Na₂O+K₂O, n_Na/n_K=3和n_M2O/n_SiO2=11.70)。在普通加热和微波加热合成体系中,添加模板剂均能扩大结晶区间,同时还可以进一步减少合成时间。     

一元醇热法制备SrHfO3：Ce超微球发光粒子

以Sr(NO₃)₂和HfOCl₂·8H₂O为原料,乙醇/水作溶剂,KOH为矿化剂,Ce(NO₃)₃·6H₂O作为激活剂,用一元醇热法制备了掺杂Ce³⁺的SrHfO₃超微球粒子。用XRD、SEM、荧光光度计分析了粒子合成过程的物相变化、形貌特征及激发和发射光谱。结果表明：在n_Sr：n_Hf=1：1,V_C2H5OH：V_H2O=4：1,水热合成温度140℃,反应时间4h,pH=13.5的条件下,获得SrHfO₃：Ce形貌为球微、分散均匀的粒子,粒径约900nm。当Ce³⁺掺杂浓度为0.7mol%时发光强度最大。     

T型分子筛膜的合成、表征与渗透汽化性能

采用二次生长法,在不锈钢、α-Al₂O₃和莫来石多孔管状支撑体上分别合成了高渗透汽化性能的T型分子筛膜。考察了合成条件如合成时间、n(SiO₂)/n(Al₂O₃)、n(H₂O)/n(Al₂O₃)和硅源等对T型分子筛膜形成和分离性能的影响。通过XRD和SEM表征了膜的晶相和形貌。     

MFI沸石纳米片及b轴取向MFI沸石薄膜的制备

我们通过自下而上（bottom-up）的方法制备了高宽深比、高结晶度的b轴方向上超薄的MFI沸石纳米片,为制备b轴取向MFI沸石薄膜提供了基础。采用滑动涂覆法（slip coating method）在玻璃片载体上制备了厚度约为100 nm的b轴取向MFI纳米片晶种层。采用无模板剂二次生长法,抑制晶种层面外孪晶生长,实现了晶种层的面内外延生长。在合成体系的n_SiO2：n_Na2O：n_{C2 H5 OH}：n_{H2 O}=1：0.03：1.3：0.89、晶化时间48 h、晶化温度180℃时,制备了厚度约为200 nm的连续致密的b轴取向MFI沸石膜,与基于四丙基氢氧化铵（TPAOH）的常规合成溶液水热二次生长制备的MFI沸石膜相比,厚度降低了90%,并且保持了晶种层的b轴取向性。     

温度控制的原位脱羧3-氟邻苯二甲酸与铅(Ⅱ)配位聚合物的合成、晶体结构及荧光性质

Pb(NO₃)₂与3-氟邻苯二甲酸(H₂Fpht)和2,2'-联吡啶(bpy)在不同水热反应温度下获得了2个新的配位聚合物:[Pb(Fba)(bpy)(NO₃)] _n (1)和[Pb₄O₂(Fba)₄] _n (2)。3-氟邻苯二甲酸配体经由原位脱羧生成了3-氟苯甲酸根(Fba)。配合物1具有Pb-NO₃-Pb双螺旋链结构,是由硝酸根桥联四方反棱柱[PbO₆N₂] 结构单元而形成,而Fba与bpy配体螯合配位于中心铅离子。配合物2为Pb-OH-Pb链状结构,包含四面体结构单元[Pb₄( μ₄-OH)₄] ⁴⁺,且具有4个晶体学独立的铅离子中心:Pb(1)O₆、Pb(2)O₆、Pb(3)O₅和Pb(4)O₅。这两个配合物链分别经氢键作用力自组装为三维超分子网络结构。室温下,测定了配合物的固体荧光光谱,均显示为基于配体的荧光发射。有意思的是,通过荧光淬灭机理配合物2可以选择性地检测硝基苯。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.