电解液对炭载Pd催化剂对甲酸氧化的电催化性能的影响

为了了解(NH4)2SO4,K2SO4和H2SO4电解液对炭载Pd(Pd/C)催化剂对甲酸氧化的电催化性能的影响和机理,用电化学方法测量了Pd/C催化剂在不同电解液中对甲酸氧化的电催化性能。发现在不同电解液中,Pd/C催化剂对甲酸氧化的电催化活性和稳定性按(NH4)2SO4>K2SO4>H2SO4的次序降低。由于在含甲酸的电解液中,不同电解液的pH值差别较小,电解液的pH值只有较小的影响。其次,电解液的电导率对甲酸氧化峰峰电位有一定的影响。最后,由于NH4+起着特殊作用,它能降低CO在Pd/C催化剂电极上的吸附量,因此,在(NH4)2SO4电解液中,Pd/C催化剂对甲酸氧化的电催化性能最好。     

Ti/SnO2+Sb2O3/Fe-PbO2电极电催化性能研究

制备了Ti/SnO2+Sb2O3/Fe-PbO2阳极,采用SEM、XRD和ICP对电极的表面形貌和组成进行了表征.为了考察电极的电催化活性,以苯酚为目标污染物,进行了电催化降解实验.研究结果表明Ti/SnO2+Sb2O3/Fe-PbO2电极电催化降解苯酚模拟废水的最佳工艺条件为:电流密度10mA/cm2、支持电解质Na2SO4浓度0.05 mol/L、温度25℃.在25℃时苯酚的电催化氧化降解反应遵循一级反应动力学规律,并且苯酚的电催化氧化主要是·OH参与的间接氧化,反应过程中电极表面产生的羟基自由基对苯酚的氧化去除起着主要作用.     

Pt/RuO2/CNTs纳米催化剂中RuO2含量对甲醇电催化氧化性能的影响

制备了一种新的甲醇直接燃料电池Pt/RuO2/CNTs阳极催化剂,在相同Pt负载量下,其甲醇电催化氧化活性是Pt/CNTs的3倍.采用循环伏安法研究发现Pt/RuO2/CNTs纳米催化剂中RuO2含量对甲醇电催化氧化活性有明显影响,当Pt和RuO2在碳纳米管上含量分别为15%和9.5%时,Pt/RuO2/CNTs催化剂具有最佳的甲醇电催化氧化活性.RuO2负载在碳纳米管上比电容的变化,反映了水合RuO2结构中质子与电子传输平衡的能力,分析表明,催化剂中RuO2含量不同导致电容的变化是影响甲醇电催化氧化活性的主要原因.当催化剂结构中质子与电子传输达到平衡时,催化剂比电容最大,电催化氧化活性最高.这种基于电容关联电催化剂的观点对甲醇直接燃料电池阳极催化剂的设计非常有意义.     

Pt/MO2/CNTs催化剂上乙醇电氧化研究

应用循环伏安法研究了几种催化剂Pt/MO2/CNTs（M = Sn, Ti, Ce）和Pt/CNTs对乙醇在H2SO4溶液中的电催化氧化过程。结果表明,金属氧化物的加入有利于乙醇的电氧化,其中,Pt/CeO2/CNTs对乙醇电氧化中间态产物具有显著的氧化性能。综合初始氧化电位、峰电流、总氧化峰面积等参数可以得出Pt/SnO2/CNTs催化剂性能最佳。     

花瓣状铂-金-石墨烯纳米结构的制备及其在葡萄糖测定中的应用

利用氧化石墨烯(GO)、PtCl62-、AuCl4-作为前驱体,在-0.4 V条件下,采用一步电化学还原法对GO和金属前驱体进行同时还原,成功制备了花瓣状的Pt-Au-GO纳米结构;同时利用伏安法研究了该催化剂对葡萄糖氧化的电催化性能,结果表明,此纳米结构对葡萄糖氧化反应表现出很好的电催化性能;据此构建了无酶葡萄糖传感器,该传感器在较低的电位下(-0.1 V)对葡萄糖的线性检测范围为1.0~25.0 mmol/L,响应灵敏度为26.3μA cm-2(mmol/L)-1,检出限为4.0μmol/L(S/N=3),且传感器具有很好的重现性、稳定性和选择性,可用于实际样品的分析检测。     

离子液体中CNT/nanoTiO_2-Pt膜电极电催化氧化葡萄糖

循环伏安法研究葡萄糖在离子液体[EMI]BF4中于碳纳米管/纳米TiO2膜载Pt(CNT/nanoTiO2-Pt)复合膜电极上的电催化氧化.结果表明,CNT/nanoTiO2-Pt电极对葡萄糖氧化具有高催化活性,氧化电位为-0.46V;在组成为离子液体与水的体积比为3∶1的电解液中,葡萄糖的氧化效果最好.电极反应过程受浓差极化控制.     

稀土氧化物的掺杂量对SO42-/ZrO2/Al2O3催化剂催化性能的影响

采用浸渍-沉淀法制备负载型纳米ZrO2/Al2O3,复合载体,并将不同量的氧化钕、氧化镨掺杂到负载型纳米ZrO2/Al2O3复合载体中以调变ZrO2的表面性能.同时以此复合载体负载SO42-制备SO42-/REXOY-ZrO2/Al2O3催化剂.运用XHD、BET、NH3-TPD、原位红外技术对催化剂的晶相结构、比表面积、孔径分布、酸中心种类等进行表征,并以α-蒎烯异构化为探针反应考察了催化剂的活性.结果表明,适量的稀土掺杂会增加催化剂的比表面积,降低ZrO2的粒径,从而增加催化剂表面SO42-的配位吸附量,提高表面酸中心数和酸强度,增强催化剂的活性.     

Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的制备与表征

采用浸渍法对无定形ZnO分别用稀H2SO4和(NH4)2S2O8溶液处理, 制备了SO42-/ZnO和S2O82-/ZnO固体酸. 通过固体离子交换法制备了Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO两种催化剂, 并采用XRD, FTIR, TPD和TPR等进行了表征. 研究结果表明, 用稀H2SO4和(NH4)2S2O8溶液分别浸渍处理无定形ZnO, 经过500-600 ℃高温焙烧后得到的SO42-/ZnO和S2O82-/ZnO固体酸表面形成了Zn3O(SO4)2物种; py-FTIR结果表明, 两者均具有B酸中心和L酸中心, 进一步的NH3-TPD研究结果证明, 制备的固体酸NH3脱附峰均出现在543 ℃附近, 属于高强度固体酸. 结构分析认为, 由于SO42-强烈的电子诱导作用, SO42-和ZnO形成的桥式配位物种产生了B酸中心和L酸中心, 而其螯合配位形成的物种没有酸性. SO42-/ZnO和S2O82-/ZnO固体酸与CuCl进行离子交换所制备的Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的Cu(Ⅰ)易于还原, 对甲醇氧化羰基化合成碳酸二甲酯(DMC)表现出较高的活性和选择性, DMC选择性为98.3%, 时空收率可达到1.9 g(g·h).     

亚铁氰化钾电催化氧化L-半胱氨酸的电化学行为研究

研究了在0.10 mol/L Na2SO4溶液中K4Fe(CN)6在玻碳电极(GCE)上电催化氧化L-半胱氨酸(L-Cys)的电化学行为。在-0.2~0.6 V的电位窗口内,L-Cys在GCE上的直接电化学氧化过程迟缓,不易直接发生氧化反应。在K4Fe(CN)6作用下,在0.23 V处出现一个不可逆的氧化峰,且氧化峰电流明显增大。研究结果表明,K4Fe(CN)6对L-Cys的氧化具有良好的电催化作用。电催化氧化峰电流Ipa随扫描速度的增大而增大,且与扫描速率平方根(v1/2)呈线性关系,表明该电催化氧化反应是受扩散控制的电化学过程。催化氧化峰电流与L-Cys浓度在4×10-5~2×10-3mol/L范围内呈良好的线性关系(R=0.9966)。该催化反应过程中电子转移系数α=0.5568,运用计时电流法(CA)得到该电催化氧化的速率常数k为(7.19±0.05)×102(mol/L)-1.s-1。     

稀土氧化物掺杂对SO4^2-／ZrO2／Al2O3催化剂催化性能的影响

采用浸溃-沉淀法在具有较大比表面积的Al2O3上直接合成纳米ZrO2制备负载型纳米ZrO2/Al2O3复合载体,并将氧化钪、氧化钕、氧化错等稀土氧化物(RExOy)分别掺杂到负载型纳米ZrO2/Al2O3复合载体中以改善ZrO2的表面性能.同时以此复合载体负载SO42-制备SO42-/RExOy-ZrO2/Al2O3催化剂.运用XRD,BET,NH3-TPD,原位红外等技术与方法对催化剂的晶相结构、比表面积、孔径分布、酸中心种类等进行表征,并以α-蒎烯异构化反应为探针考察了催化剂的催化性能.结果表明,掺杂的稀土氧化物没有改变ZrO2的晶相结构,但ZrO2粒度有所减小,催化剂的比表面积增加,同时稀土氧化物的存在还会改变催化剂表面SO42-的配位方式,提高表面酸中心数和酸强度,增强催化剂的活性.催化剂的孔结构对选择性有较大的影响.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.