研究堆慢正电子源构建中的关键机理问题

研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.     

Performance of the plugged-in 22Na based slow positron beam facility

The Beijing intense slow positron beam facility is based on the 1.3 GeV linac of Beijing ElectronPositron CoUider (BEPC) aiming to produce mono-energetic intense slow positron beam for material science investigation. The plugged-in 22Na based slow positron beam section has been newly constructed to supply continuous beam time for the debugging of positron annihilation measurement stations and improve the Beijing intense slow positron beam time using efficiency. Performance testing result of the plugged-in 22Na based slow positron beam facility are reviewed in this paper, with the measurement of the beam transport efficiency, the view of beam spot, the adjustment of beam position, the measurement of beam intensity and energy spread etc. included.     

Design of a new type positron beam system

A new type positron beam system is being constructed in Wuhan university. The goal of this project is to build a positron beam which can measure positron lifetimes and has high moderation efficiency. The system utilizes a magnetically guided incident positron beam and the sample is biased to a high negative potential to achieve the desired implantation energies. A conventional tungsten moderator is replaced by a solid Ne moderator with high moderation efficiency (about 1%). A multi-functional target chamber for slow beam studies is designed, which can be used for positron annihilation lifetime spectroscopy (PALS), Doppler broadening (DB) and coincidence Doppler broadening (CDB) measurements.     

北京慢正电子强束流运行性能测试

慢正电子强束流采用高能脉冲电子束流轰击金属钽靶, 以产生正负电子对的方式提供正电子, 作为慢正电子束流方法学研究和薄膜材料缺陷研究的束流基础. 本文是在该装置实现运行后, 对慢正电子束流的强度、能散、形貌等运行性能的测试工作的介绍, 以及慢正电子湮没多普勒测量系统的调试和标准样品的测量结果.     

正电子慢化体的研究和进展

正电子湮没技术是一种研究材料的微观缺陷和相变的灵敏工具,在通常的正电子谱仪中,正电子能量为MeV量级,在样品中注入深度比较学（－100μm）,主要研究材料体内的平均缺陷密度,慢正电子束方法把正电子的能量降低为keV量级（而且可以调节）,注入比较浅（－μm）,所以是研究表面缺陷的探测手段,正电子慢化体是产生慢正电子的关键设备,对其研究有重要意义,文章综述了慢化体研究的历史和现状,从物理概念出发介绍使正电子慢化的四种可能方法和当今慢化体的五种几何排列方法,其中应用最广泛的是钨慢化体和百叶窗式的排列方式,效率最高的是惰性气体固体慢化体,而加电场慢化体是有待开发的高效慢化体。     

SIMION simulation of a slow pulsed positron beam

A new slow pulsed positron beam, including a positron source, a moderator, a chopper, a pre-buncher, a main-buncher and a sample chamber, etc, has been installed and tested. It is necessary to simulate the acceleration, transportation and space focusing of positrons to meet the needs of beam debugging and further positron annihilation experiments. The result from SIMION simulations shows that the radius of the focused positron beam is less than 5 mm, which is further confirmed in our practical debugging process.     

脉冲慢正电子束流的直流化装置

在基于加速器的北京慢正电子强束流装置上, 用Penning-Trap技术实现了脉冲慢正电子束流的存储和直流化. 实验表明, 系统的真空度对正电子的存储效率有严重影响, 脉冲正电子的释放方式决定了直流化后束流的能量分散; 改变释放级信号波形以及释放方式可以得到能量分散小于1eV的准直流化慢正电子束流.     

Intense slow positron production at the 15 MeV LINAC at Argonne National Laboratory

An intense slow positron beam using a 15 MeV LINAC (average current 1.25 × 10¹⁵ e⁻/s) at the Radiation and Photochemistry Group, Chemistry Division of Argonne National Laboratory (ANL) has been proposed and studied. Computer simulated results optimizing the positron yield and distribution of energy and angle show that a slow positron production at 10¹⁰ e⁺/s is possible. A proposed design of an intense slow positron beam with optimal conditions of incident electron, converter/moderator configurations, and extraction/transportation is presented.     

基于北京慢正电子强束流的微脉冲化系统设计

慢正电子湮没寿命测量是研究材料表面微观缺陷的重要分析方法．束团化系统是实现慢正电子湮没寿命测量的核心部件, 主要由斩波、聚束两部分组成, 它可以将随时间连续分布的束流束团化, 从而获得正电子湮没寿命测量的时间起点及满足时间分辨率要求的束团．本文以粒子动力学计算为基础, 完成了束团化系统的物理设计, 其时间分辨率设计值为150ps(FWHM)．     

北京慢正电子强束流磁场输运系统设计研究

针对基于北京正负电子对撞机的慢正电子强束流系统对输运磁场的设计要求,本文对不同规格的磁场输运线圈模型、长螺线管端口处磁场的补偿以及地磁场和弯管道对正电子束流的影响等进行了计算,提出适用于本系统传输慢正电子束流的输运磁场分布、补偿线圈、调整线圈的加工参数,计算表明,系统的总体磁场不均匀度小于10髎.实际运行束流测试表明,所设计的磁场系统能够很好的将慢正电子束流输运到约16m远的样品测量室,慢正电子束斑尺寸基本没有变化,满足慢正电子束流系统的设计要求.     

Stretching of slow positron pulses generated with an electron linac

A facility for generating a high intensity slow positron beam using an electron linear accelerator has been constructed. A conversion efficiency of 6×10^–7 slow positrons per incident electron has been obtained for 75 MeV electrons. Storage and stretching of pulsed slow positrons have been successfully carried out with a Penning trap.     

慢正电子束流技术在金属/合金微观缺陷研究中的应用

正电子湮没谱学技术是研究材料微观结构非常有效的一种核谱学分析方法, 主要用于获取材料内部微观结构的分布信息, 特别是微观缺陷结构及其特性等传统表征方法难以获取的微观结构信息. 近年来, 在慢正电子束流技术快速发展的基础上, 正电子湮没谱学技术在薄膜材料表面和界面微观结构的研究中得到了广泛应用. 特别是该技术对空位型缺陷的高灵敏表征能力, 使其在金属/合金材料表面微观缺陷的形成机理、缺陷结构特性及其演化行为等研究方面具有独特的优势. 针对材料内部微观缺陷的形成、演化机理以及缺陷特性的研究, 如缺陷的微观结构、化学环境、电子密度和动量分布等, 正电子湮没谱学测量方法和表征分析技术已经发展成熟. 而能量连续可调的低能正电子束流, 进一步实现了薄膜材料表面微观结构深度分布信息的实验表征. 本文综述了慢正电子束流技术应用研究的最新进展, 主要围绕北京慢正电子束流装置在金属/合金材料微观缺陷的研究中对微观缺陷特性的表征和表面微观缺陷演化行为的应用研究成果展开论述.     

锆离子注入锆-4合金缺陷的慢正电子研究

采用慢正电子束多普勒展宽谱研究了Zr离子注入Zr-4合金产生的缺陷及其退火回复行为，发现经过大于离子注入剂量为1×10¹⁶cm^-2的样品所产生的缺陷在注入过程中已经回复，而对剂量为1×10¹⁵cm^-2样品做300℃退火处理，其缺陷基本回复，得出合金缺陷回复能较低的结论. 考虑到材料的缺陷含量越高，其抗腐蚀性能越差，在辐照环境下通过给材料保持一定温度，即可使其缺陷得到较好回复，从而提高材料的抗腐蚀性能.     

以慢原子束方式进行原子转移的双磁光阱系统

建立了一套用于玻色-爱因斯坦凝聚实验的铷原子双磁光阱装置.从低速强源中获得慢原子束，向超高真空磁光阱进行原子转移.低速强源磁光阱与超高真空磁光阱之间可维持3个量级的压强差,超高真空磁光阱的真空度最高可达1×10^-9 Pa. 慢原子束的束流通量达1×10⁹/s. 约4×10⁸个⁸⁷Rb原子被装载到超高真空磁光阱中.还讨论了两种典型情况下磁光阱中装载的最大原子数.     

Testing of a cryogenic source of slow monochromatic positrons

The results of testing a cryogenic source of slow monochromatic positrons based on the ²²Na isotope, designed and constructed at JINR, are presented. A solid neon moderator was used to generate a monochromatic beam from the continuous β⁺ spectrum of 0–0.5 MeV, with solid neon being frozen to the base layer, which is cooled to the temperature of 5–7 K. Test source of the ²²Na isotope allows the forming of a slow positron beam of intensity 5.8 × 10³ part./s and the average energy 1.2 eV at a spectrum width of 1 eV. The efficiency of moderation is 1% of the total positron flux.     

基于捕获的新型正电子束及应用

基于捕获的新型正电子束技术是通过潘宁阱中捕获、约束和积累正电子而发展的新一代正电子束技术。本文介绍正电子的捕获、冷却,压缩技术,基于捕获的正电子束形成技术,以及该技术将来发展展望,最后讨论该技术在原子物理学和材料科学等多个领域的应用。     

Some investigations of moderators for slow positron beams

Measurements were made on a low-energy positron beam apparatus in an attempt to increase the efficiency of the slow positron yield from radioisotopes. A study was made to sweep thermalized positrons to the surface of a silicon wafer with an applied electric field at 298 and 140 K. Temperature studies were also made on more conventional Pt and Pt+MgO powder moderators and the results are discussed. The role of the MgO powder has been clarified, though fundamental questions remain. The positron apparatus beam and relevant information regarding sources, temperature and magnetic fields are discussed in sufficient detail so that such a slow positron beam utilizing a “conventional” slow positron moderator could be easily duplicated for use in solid state studies.     

Simulation of time bunching for a pulsed positron beam

Simulate anneal arithmetic has been used to settle the problem of time bunching on a pulsed slow-positron beam device. This paper has searched for the parameters of the device in a large scope and achieved the time resolution within 150ps at the target with accelerating voltage in a range of 0.5-30kV.     

射频离子源束流特性分析

介绍了为HL-2A 装置设计的引出束功率为1MW 的射频离子源研制情况。目前,在测试平台上,该离子源已经成功引出了束能量和束电流分别为35keV 和12.4A、束质子比为79%、脉宽为100ms 的氢离子束,达到了其设计束功率的44%。用红外热成像的方法测量了离子束能量密度分布。结果表明,在距离引出系统地电极 1.3m 处,束密度分布遵循高斯分布。引出束的最佳导流系数为1.689×10^–6A•V^-3/2 左右,随射频功率改变有较小的变化。根据这些实验结果,采取了相关改进措施来改善离子源的引出束性能。     

慢正电子束技术的应用与发展

本文介绍了慢正电子束技术和最新发展,慢正电子束作为探针的基本特性,以及在多种学科中的应用等。