本体聚合法制备2-氯酚分子印迹聚合物及其性能评价

采用本体聚合法,以2-氯酚为模板分子,4-乙烯吡啶为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂合成了一系列分子印迹聚合物,并通过选择性实验和静态吸附实验对聚合物的选择性及吸附性能进行评价.结果显示:当以甲苯作为致孔剂,功能单体与模板分子的摩尔比为2:1时,聚合物对模板分子的印迹因子为1.71,亲和位点总数Bmax为0.1137 mmol/g,具有最优的选择性和吸附能力.     

环丙沙星分子印迹聚合物的制备及其吸附特性的研究

以环丙沙星(CIP)为模板分子,α-甲基丙烯酸(MAA)为功能单体,三甲基丙烯酸三羟甲基丙烷酯(TRIM)为交联剂,进行热聚合.通过对于功能单体和交联剂的用量对分子印迹聚合物吸附性能的影响的研究,得到最佳的聚合配比为n(CIP):n(MMA):n(TRJM)=1:6:16,并以此配比制得了对环丙沙星具有特异选择性吸附的分子印迹聚合物.通过静态平衡结合法研究了模板聚合物的结合动力学以及该聚合物的结合能力和选择特性,通过Scatchard分析法研究了印迹聚合物对模板分子的结合特性.结果表明,该印迹聚合物具有良好的吸附能力和吸附选择性,静态吸附分配系数KD为41.64,分离因子α为1.62;该印迹聚合物中形成了2类不同的结合位点,经计算它们的离解常数分别为Kd1=5.249×10-5mol·L-1,Kd2=2.237×10-3mol·L-1.     

芹菜素分子印迹聚合物的制备及印迹效率评价

采用分子印迹技术,以芹菜素为模板合成了其分子印迹聚合物,并优化了合成条件。采用平衡结合实验考察了印迹聚合物对底物的吸附性能与选择性,并对聚合物的印迹效率进行了评价。结果表明,以2-乙烯基吡啶(2-Vpy)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃(THF)为致孔剂,且当n(API):n(2-Vpy):n(EDMA)=1:8:40,反应温度为60℃时,所得的芹菜素分子印迹聚合物对底物具有高吸附性能和选择性识别能力;Scatchard分析表明,在研究的浓度范围内,聚合物中形成了对模板分子有不同亲和力的两类结合位点;芹菜素印迹聚合物的印迹效率为47.9%。     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

扑热息痛分子印迹聚合物膜选择性结合和渗透性质的研究

采用紫外光引发原位聚合的方法制备了具有支撑膜的扑热息痛分子印迹聚合物膜. 紫外分光光度法证明了模板分子与功能单体之间存在相互作用, 并据此选择了聚合反应时合适的溶剂. 用傅立叶红外光谱和扫描电镜分别测定了膜的结构和表面形貌. 渗透实验结果表明渗透时所用溶剂对渗透结果有重要影响. 合适的渗透溶剂可提高印迹膜对模板分子的渗透选择性.     

1-氨基乙内酰脲分子印迹聚合物的制备和吸附性能研究

以1-氨基乙内酰脲(AHD)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了分子印迹聚合物(M IP),考察了模板分子与功能单体不同比例下制备的M IP对模板分子的吸附性能。通过Scatchard分析,表明该印迹聚合物上存在一类等价的吸附位点,其结合位点的离解常数KD=4.33mmol/L。     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

甲醛分子印迹聚合物的理论设计

采用量子化学密度泛函理论中的B3LYP/6-31G（d, p）方法,以甲醛（HCHO）为印迹分子,衣康酸（IA）为功能单体,分别以乙二醇二甲基丙烯酸酯（EDMA）、季戊四醇三丙烯酸酯（PETA）和三甲醇基丙烷三甲基丙稀酸酯（TRIM）为交联剂,以水（H₂O）、乙腈（ACN）、甲醇（MT）、四氢呋喃（THF）、氯仿（CAS）和甲苯（TL）作为溶剂,计算并讨论了不同物质的量比例HCHO-IA稳定复合物成键作用位点、成键数目与结合能,优化了印迹物质的量比例、交联剂及溶剂,并基于价键理论的化学键电子密度拓扑分析方法对HCHO-IA稳定复合物的电子密度拓扑性质进行了分析研究.理论研究结果表明,HCHO印迹分子中的O原子与2个H原子均通过氢键与IA单体相互作用,在印迹物质的量比例为1∶3,且以TL为溶剂时形成的HCHO-IA有序复合物氢键数目最多,结合最强,HCHO-IA复合物构型最稳定;与EDMA、PETA交联剂相比,TRIM与IA结合最强,更适宜作为HCHO分子印迹聚合物（MIPs）的交联剂.本研究为HCHO-MIPs合成时印迹物质的量比例、交联剂及溶剂的选择提供了理论指...     

农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

氨基三唑分子印迹聚合物的制备及性能表征

采用分子印迹技术,以氨基三唑(AMI)为模板分子,异丁醇为溶剂,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酯(EDMA)为交联剂,合成了氨基三唑分子印迹聚合物(AMI-MIP)。采用静态平衡结合实验和选择性实验评价了AMI-MIP对底物分子的结合特性及分子识别性能,并进行了吸附动力学研究。结果表明,AMI-MIP对AMI存在不同亲和力的两类结合位点,且对AMI具有很高的选择吸附特性和良好的分子识别性能,AMI-MIP对AMI的吸附行为可用准二级吸附动力学方程加以描述。     

三元交联剂分子烙印手性固定相

采用２－乙烯基吡啶＋丙烯酰胺复合功能单体,以三甲氧基丙烷三甲基丙烯酸酯为三元交联剂制备了苯甲氧羰基－Ｌ－色氨酸烙印手性固定相,并与二元交联剂烙印相同氨基酸衍生物的情况进行了对比,发现三元交联剂在较小的用量下就可使分子烙印聚合物达到足够的交联度,实现烙印分子对映体的基线分离。     

Synthesis of Molecularly Imprinted Polymer for Removal of Effective Impurity (Benzhydrol) from Diphenhydramine Hydrochloride Drug

The present study describes the synthesis and preliminary testing of molecularly imprinted polymers (MIPs) as scavenger resins for removal of the genotoxic impurities (GTI) benzhydrol from active pharmaceutical ingredients (API). A new molecularly imprinted polymer was synthesized using benzhydrol (template molecule), methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross‐linker), 2,2′‐azobisisobutironitril (intiator) and chloroform (porogenic solvent). To compare the performance of this polymer, a control polymer or non‐imprinted polymer (NIP) was prepared under the same conditions without the use of template molecule. The synthesized polymers were characterized by FT‐IR spectroscopy. Selectivity of the molecularly imprinted polymer for absorption benzhydrol impurities through adsorption experiments reviews and the results were compared with the adsorption of impurities by NIP. Various parameters were optimized such as time, pH, type of eluent for elution of impurities from polymer, concentration of sample and saturation of polymer. The proposed method was applied for removal of benzhydrol from Diphenhydramine hydrochloride syrup and passing it through the MIPs led to the quantitative removal of benzhydrol.     

A NOVEL MOLECULARLY IMPRINTED POLYMER： SYNTHESIS AND ADSORPTION BEHAVIOR OF GATIFLOXACIN

A kind of molecularly imprinted polymer （MIPs） with high selectivity was prepared using methacrylic acid （MAA） as functional monomer, ethylene glycol dimethacrylate （EDMA） as crosslinker and Gatifloxacin as template. The effect of various parameters such as volume of solvent, functional monomer dosage, crosslinker dosage and polymerization time were investigated. The selective binding experiment for substrates show that the affinity and selectivity for Gatifloxacin were higher than that for blank polymer. Scatchard analysis show that the MIPs recognized template with two kinds of binding sites. The dissociation constant Kd and maximum adsorption quantity Qmax of these two kinds of binding sites were calculated： Kd1 and Qmax1 of the binding sites with high affinity were 8.67×10^-4 mol/L and 28.19μmol/g, while Kd2 and Qmax2 of the binding sites with low affinity were 1.05×10^-3 mol/L and 33.20μmol/g respectively.     

药物氟哌酸分子印迹聚合物膜的制备及其渗透性质研究

以聚偏氟乙烯微孔滤膜为支撑膜,氟哌酸为模板分子,用紫外光引发原位聚合方法制备了分子印迹聚合物膜.研究了模板分子与功能单体之间的相互作用,用扫描电镜表征了膜的表面形貌.混合底物渗透实验结果表明,分子印迹聚合物膜中存在着由形状和功能基团均与模板分子氟哌酸相互补的孔穴组成的通道,该通道可选择性地富集底物分子.     

Recognition of Staphylococcus enterotoxin via molecularly imprinted beads

The synthesis of molecularly imprinted beads for the recognition of the protein Staphylococcus enterotoxin B (SEB) is described. Two kinds of organic silane (3-aminopropyltrimethoxysilane (APTMS) and octyltrimethoxysilane (OTMS)) were polymerized on the surface of polystyrene microspheres after the SEB template was covalently immobilized by forming imine bonds. The resulting imprinted beads were selective for SEB. The Langmuir adsorption models were applied to describe the equilibrium isotherms. The results showed that an equal class of adsorption was formed in the molecularly imprinted polymer (MIP) with the maximum adsorption capacity of 3.86 mg SEB/g imprinted beads. The MIP has much higher adsorption capacity for SEB than the nonimprinted polymer, and the MIP beads have a higher selectivity for the template molecule.     

Grafting of MIPs from PVDF Membranes via Reversible Addition-fragmentation Chain Transfer Polymerization for Selective Removal of p-Hydroxybenzoic Acid

Effective molecularly imprinted membranes(MIMs) were developed as an efficient adsorbent for the selective removal of p-hydroxybenzoic acid(p-HB) from acetylsalicylic acid(ASA, aspirin). The MIMs were grafted successfully from poly(vinylidene fluoride) microfiltration membranes via reversible addition-fragmentation chain transfer(RAFT) polymerization. The graft copolymerization of acrylic acid(AA) in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer(MIP) film coated membranes. The obtained MIMs were characterized by scanning electron microscopy(SEM), Fourier transform infrared spectrophotometer(FTIR) and Raman spectra, and batch mode adsorption studies were carried out to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin.     

Selective separation of magnolol using molecularly imprinted membranes

Molecularly imprinted membranes (MIMs) for selective separation of magnolol were prepared by thermal polymerization using magnolol as the template, ethylene glycol dimethacrylate (EGDMA) as the cross‐linker, 2,2‐azobisisobutyronitrile (AIBN) as the initiator, organic solvent as the porogen, methacrylamide (MAM) and acrylic acid (AA) as the functional monomers and cellulose acetate as the agglutinant. Commercial filter paper was used as the supporting material. The effects of different porogens and the ratio of functional monomers on the binding and recognition capacity of MIMs were investigated, and the morphology of the membranes was examined by scanning electron microscopy (SEM). The results showed that the MIMs have the highest selectivity to magnolol when the ratio of MAM/AA was 1:4 and tetrahydrofuran (THF) with dimethyl sulfoxide (DMSO) was used as the porogen. The morphology of the imprinted membranes after template extracting is much rougher with big cavities than that of the non‐imprinted membranes (NIMs) and the imprinted membranes before template extracting. The MIMs can selectively separate the magnolol.