酶催化合成共轭亚油酸甘油酯的溶剂效应

研究了以共轭亚油酸(CLA)和甘油为原料,利用脂肪酶Novozym 435在异辛烷和无溶剂两种反应体系中采用直接酯化法催化合成共轭亚油酸甘油酯,并探讨了温度和时间对溶剂效应的影响.结果表明:在65℃,n(甘油):n(CLA)=2:1,酶添加量为体系总质量的1%的条件下,反应24 h后,不同反应体系中共轭亚油酸的转化率相近,分别为83.44%和88.24%,而所得共轭亚油酸甘油酯的组成有显著差别,分别形成W/O型和O/W型微乳液,前者以单甘酯和二甘酯为主产物,后者以三甘酯为主产物.     

Lipozyme TL IM催化油酸酯化反应制备1,3-甘油二酯

探究了固定化脂肪酶Lipozyme TL IM催化单甘酯与油酸进行酯化反应制备1,3-甘油二酯的可能性,考察了溶剂、水活度、反应温度、底物摩尔比以及溶剂用量对甘油二酯产率及脂肪酶1,3-位置选择性的影响.在优化的实验条件(45℃,1.5 g Lipozyme TL IM,油酸与单甘酯摩尔比1.5∶1,6.0 g三氯甲烷,水活度为0.33)下,反应6 h时,甘油二酯产率可达80%,其中1,3-甘油二酯产率高达92%以上.Lipozyme TL IM循环使用5次后,甘油二酯产率及脂肪酶选择性无明显下降.     

脂肪酶 Novozyme 435 选择性催化2,2-二甲基环丙烷甲酸乙酯合成S-(+)-2,2-二甲基环丙烷甲酸

 采用脂肪酶催化外消旋 2,2-二甲基环丙烷甲酸乙酯 (DMCPE) 不对称水解合成西司他丁关键手性中间体 S-(+)-2,2-二甲基环丙烷甲酸 (S-(+)-DMCPA). 比较了 5 种不同来源的脂肪酶, 从中优选出立体选择性较高和催化活性较高的脂肪酶 Novozyme 435, 系统考察了影响该酶催化不对称水解反应的关键因素, 获得了优化的生物催化工艺条件. 结果表明, 当脂肪酶 Novozyme 435 用量为 16 g/L, 底物 DMCPE 浓度为 65 mmol/L 时, 以 pH 值为 7.2 的磷酸缓冲液 (1 mol/L) 为反应介质, 30 oC 反应 64 h, 产物的收率和光学纯度分别为 45.6% 和 99.2%. 脂肪酶 Novozyme 435 催化 DMCPE 不对称水解制备 S-(+)-DMCPA 工艺的产物光学纯度高, 路线可行, 并且酶可重复使用, 具有良好的工业化应用前景.     

甘油酯化降酸反应过程研究

研究了酸化油甘油酯化反应降低酸值的反应过程,考察了温度、甘油与酸化油中游离脂肪酸物质的量比和单甘酯含量对反应的影响,发现甘油单甘酯能明显促进酯化反应的进行。对二元体系甘油三酯-甘油、油酸-甘油和单甘酯-甘油的液-液相平衡以及甘油-单甘酯-油酸三元体系液-液相平衡的分析结果表明,甘油单甘酯的存在能够显著提高甘油与脂肪酸的相互溶解。这较好地解释了甘油单甘酯在酸化油酯化反应中的促进作用。     

大环碳酸酯的Novozym-435酶促开环聚合

研究了14元环的碳酸丁二酯二聚体在固定化脂肪酶Novozym-435催化下的开环聚合反应制备聚碳酸丁二酯.聚合在常压,75℃的甲苯溶液中进行,反应条件温和.详细探讨了反应条件诸如单体浓度,酶浓度对于聚合的影响.结果显示Novozym-435具有与异辛酸亚锡可比拟的高催化活性,同时可以回收重复使用.聚合动力学研究表明碳酸丁二酯的酶促甲苯溶液开环聚合和环状内酯的酶促甲苯溶液聚合有所不同,没有表现出活性聚合的特征.     

水相中微波辅助合成咪唑并[1,2-α]吡啶衍生物的研究

开展了水相中硝基烯烃与氨基吡啶反应生成咪唑并[1,2-α]吡啶衍生物的微波辅助合成研究。结果表明:相同反应时间,在微波辅助条件下,生成咪唑并[1,2-α]吡啶衍生物的速率较常规加热条件下增大。一系列咪唑并[1,2-α]吡啶衍生物被高效的合成出来,最高产率达到85%。产物结构经~1H NMR,~(13)C NMR及MS得到确证。该方法具有产率高、操作简单、环境友好等优点。     

华根霉菌丝体结合脂肪酶催化酯合成动力学拆分2-辛醇

研究了华根霉CCTCC M201021菌丝体结合脂肪酶(RCL)在非水相中催化酯合成动力学拆分外消旋2-辛醇的能力.发现RCL对该反应具有较好的光学选择性(E>100),辛酸和异辛烷分别是最佳的酰基供体和反应溶剂,体系水活度的减少对反应的光学选择性没有明显影响,但能显著提高反应初速度.在相同转化率下,通过添加3A分子筛降低体系水含量可使反应初始速度提高7.3倍.当底物浓度提高到0.230 mol/L,反应40 h时转化率达44.4%,产物酯的ee值为94.7%.与三种商品化脂肪酶进行了比较,发现在相同条件下RCL对2-辛醇的拆分不但具有较好的光学选择性(E=103.1),而且也表现出较高的反应初速度和转化率.     

微波辐射固体酸催化合成马来酸双酯

首次在微波辐射下，用活性炭固载对甲苯磺酸催化合成了马来酸双酯．当微波辐射功率为150W．正辛醇：酸酐＝3：1，催化剂用量为2．5g时，反应20min后，马来酸酐转化率达89．8％，产物的选择性为99．5％．同时，也发现随着醇的炭数增多，反应温度和反应速率增加；在微波辐射条件下，酯化反应速率、产物选择性都高于常规加热方式下的反应结果．     

3-芳氧基-1-丙胺类HIV-1 Tat/PCAF BRD抑制剂的合成及生物活性

为了研究HIV-1 Tat/PCAF BRD抑制剂的构效关系, 合成了6个3-芳氧基-1-丙胺类化合物. 以取代的2-硝基苯酚为起始原料, 在常规加热和微波辐射加热下与1,3-二溴丙烷反应合成3-(2-硝基芳氧基)-1-溴丙烷(3), 结果显示, 微波辐射加热比常规加热下的反应速度明显加快, 收率有所提高. 3和邻苯二甲酰亚胺钾进行N-烷基化反应合成了2-[3-(芳氧基)-丙基]二氢异吲哚-1,3-二酮, 再经肼解得到了目标化合物, 所有化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. ELISA检测法测定了它们体外抑制HIV-1 Tat/PCAF BRD的活性, 并对影响活性的因素进行了讨论.     

酶促开环聚合与自缩合乙烯基共聚合相结合制取超支化聚合物

在Novozyme 435脂肪酶催化下, 甲基丙烯酸羟乙酯(HEMA)引发己内酯(ε-CL)开环聚合反应, 得到一端为双键, 另一端为羟基的直链聚己内酯(PCL)产物; 将其端羟基官能化得到大分子AB*型单体, 与苯乙烯以原子转移自由基聚合(ATRP)反应形式进行自缩合乙烯基共聚合, 得到超支化结构聚苯乙烯-b-聚己内酯产物.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.