Dy^3＋在Ba3La（B03）3中的光致发光

研究了Ba3La(BO3)3基质中Dy^3 的光致发光特性；探讨了RE^3 的电荷半径比(z／r)和Ce^3 ，Dy^3 含量对Dy^3 发光强度及发光颜色的影响；分析了Ba3La(BO3)3中Ce^3 对Dy^3 发光的敏化作用；确定了Dy^3 的^4F9／2→^6H15／2及^4F9／2→^6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用。     

单掺杂与共掺杂离子对Sr2Mg(BO3)2磷光体热释发光的影响

通过高温固相法合成了Sr2Mg(BO3)2磷光体, 并研究了Li＋, Bi3＋, Gd3＋, Ti4＋共掺杂对Sr2Mg(BO3)2∶Dy磷光体热释发光的影响. 研究发现: Li＋的共掺杂使Sr2Mg(BO3)2∶Dy磷光体的热释光主峰强度增加, 而 Bi3＋, Gd3＋或Ti4＋的掺入使样品的热释光强度降低. 在Li＋, Bi3＋, Gd3＋或Ti4＋共掺杂的Sr2Mg(BO3)2∶Dy磷光体高温热释光发射谱中, 我们观察到了480, 579, 662和755 nm的发射峰, 为特征Dy3＋离子的4F9/2→6H15/2, 4F9/2→6H13/2, 4F9/2→6H11/2和4F9/2→6H9/2跃迁, 与Sr2Mg(BO3)2∶Dy磷光体的发射一致. 利用峰形法, 我们评估了Sr2Mg(BO3)2∶ , ( )热释光磷光体234 ℃发光峰的动力学参数, 陷阱深度E＝1.1 eV, 频率因子s＝6.3×109 s－1, 遵循二级动力学.     

新型单基质白光荧光粉Sr3La1-x（PO4）3:xDy3+制备及发光性能

采用高温固相法合成了Sr3La1-x(PO4)3:xDy3+荧光粉,并对其结构和发光特性进行了研究。样品发射光谱呈多峰发射,主峰位于482,576和666 nm,分别对应Dy3+的4F9/2→6H15/2,4F9/2→6H13/2和4F9/2→6H11/2特征跃迁。监测不同发射峰,激发光谱峰位置不变,主激发峰位于348,362和385 nm,可以被InGaN管芯有效激发。分析了Dy3+掺杂浓度对样品发光强度的影响,确定Dy3+的最佳掺杂摩尔分数为10%。根据Dexter理论分析其浓度猝灭机理为电偶极-电偶极相互作用。不同Dy3+掺杂浓度样品发射光谱的色坐标均在白光区域内。     

Dy3+离子在硼磷酸锌玻璃中的发光性质

Dy3 离子在可见光范围内的两个主发射分别起源于4F9/2→6H15/2的蓝光和4F9/2→6H13/2的黄光.4F9/2→6H13/2属于超灵敏跃迁,跃迁几率强烈受环境的影响,因此,两种跃迁的分支比随离子所处环境的变化而改变.通过高温熔融的方法制备一系列Dy2O3掺杂的ZnO-B2O3-P2O5玻璃,并计算了Dy3 离子发光的黄、蓝强度比和色坐标.结果表明:随着ZnO百分含量的增加,P2O5百分含量的减小,Dy3 离子发光的黄、蓝强度比减小,同时色坐标趋于白光;而B2O3的作用居中.进一步的研究发现,B2O3在玻璃中的存在方式[BO3]和[BO4]对Dy3 离子发光的黄、蓝强度比的作用不同.[BO3]使Dy3 离子发光的黄、蓝强度比增大,[BO4]则相反.通过固体核磁共振谱和红外光谱的测试,表明所研究的三元系ZnO-B2O2-P2O5玻璃样品,由于P2O5的含量较高,B2O3基本以[BO4]四面体为结构单元.因此Dy3 发光的黄、蓝比与玻璃的组成及百分含量之间存在着上述规律性.     

Dy3+单掺及Dy3+,Er3+共掺GdVO4纳米粒子的制备及发光性能的研究

用水热法制备了Dy3+单掺及Dy3+,Er3+双掺GdVO4纳米荧光粉,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱仪(FTIR)和荧光(FL)光谱对合成样品的结构、形貌和发光性能进行表征;探讨了Dy3+掺杂浓度、络合剂对GdVO4:Dy3+纳米晶的结构、形貌和发光性能的影响;考察了不同波长的近红外光和紫外光激发的GdVO4:Dy3+,Er3+,得到不同颜色的上转换和下转换荧光光谱。以760~830 nm近红外光和210~380 nm紫外光激发GdVO4:Dy3+纳米晶,可获得Dy3+蓝绿色双模发光;其中蓝光来自于Dy3+离子的4F9/2→6H15/2跃迁,绿光由Dy3+离子4F9/2→6H13/2跃迁产生。     

Ce和Dy在Cd0.5Zn0.5B4O7中的发光特性及能量双向传递

采用高温固相法制备了白蓝光双发射为一体的Cd0.5Zn0.5B4O7∶Ce/Dy系列发光材料. 由XRD测得Cd0.41Zn0.5B4O7∶Ce0.04/Dy0.02的晶胞参数: a=1.3885 nm, b=0.8020 nm, c=0.8670 nm, 属于正交晶系, Pbca空间群. 在Ce/Dy双掺的体系中存在Ce3+和Dy3+两种发光中心, 254~350 nm激发主要是Dy3+的 4F9/2→6H15/2和4F9/2→6H13/2跃迁发射, 而355—390 nm激发主要为Ce3+的5d→4f跃迁发射. 340 nm激发Ce/Dy双掺发光体的发射强度是同浓度Dy3+单掺的31倍, Ce3+是Dy3+的高效敏化剂, 而355—390 nm激发Dy3+是Ce3+的敏化剂. 体系中存在少见的Ce3+→Dy3+与Dy3+→Ce3+的能量双向传递.     

Ba_3(PO_4)_2:Ce~(3+),Dy~(3+)荧光粉的组成与发光特性研究

在活性炭还原气氛下高温固相法合成了Ba3(PO4)2:Ce3+,Dy3+紫外发射荧光粉。XRD图谱表明,烧结温度为1100℃时保温处理3 h,样品为单相的Ba3(PO4)2型六方晶系结构。荧光光谱显示:单掺Ce3+样品中,Ce3+掺杂浓度为8%(摩尔分数)时样品的发光最强,发射峰的位置处在350 nm附近(Ce3+的2D→2F5/2和2D→2F7/2跃迁发射)。适量的Sr2+取代部分Ba2+离子,改变了基质晶格环境,使样品的发光强度得到提高且发射峰向长波方向红移。引入Dy3+作为敏化剂,样品发射峰红移到386 nm,亮度增强,主要是由于Dy3+和Ce3+之间发生了有效的能量传递过程。确定了Dy3+的最佳掺杂浓度为3%,发光强度提高了27%。     

(ZnBaLa)BO3∶Eu3+的合成与发光的研究

高温固相扩散法合成了发光材料Zn1．5xBa1．5yLa1-x-y-z)BO3∶Eu3+z(x+y+z＜0．4)．对样品进行了XRD和IR分析,结果表明：在空气中900 ℃条件下,合成了荧光体样品,LaBO3中La3+离子被部分Zn2+和Ba2+离子取代使晶系发生了变化,LaBO3属于正交晶系,而(Zn0．27Ba0．24La0．61)BO3∶Eu3+0．05经过XRD属于立方晶系,a=0.639 7,V=0.261 8 nm3．扫描电镜测其晶貌,平均粒度为22 μm左右．样品的激发光谱和发射光谱显示：在基质BO3结构中O2—Eu3+的CT带位于295 nm,Eu3+的强发射来自5D0→7F1和5D0→7F2跃迁,存在磁偶极和电偶极两种跃迁．     

（ZnBaLa）BO3：Eu^3＋的合成与发光的研究

高温固相扩散法合成了发光材料Zn1．5xBa1．5yLa1-x-y-z)BO3∶Eu3+z(x+y+z＜0．4)．对样品进行了XRD和IR分析,结果表明：在空气中900 ℃条件下,合成了荧光体样品,LaBO3中La3+离子被部分Zn2+和Ba2+离子取代使晶系发生了变化,LaBO3属于正交晶系,而(Zn0．27Ba0．24La0．61)BO3∶Eu3+0．05经过XRD属于立方晶系,a=0.639 7,V=0.261 8 nm3．扫描电镜测其晶貌,平均粒度为22 μm左右．样品的激发光谱和发射光谱显示：在基质BO3结构中O2—Eu3+的CT带位于295 nm,Eu3+的强发射来自5D0→7F1和5D0→7F2跃迁,存在磁偶极和电偶极两种跃迁．     

新型联吡啶二羧酸镝配合物的合成及其性能

2,2'-联吡啶-6,6'-二甲酸(H2bpdc)与Dy2O3经水热反应合成了一个新型的联吡啶二羧酸镝配合物[Dy2(bpdc)3(H2O)3·0.5H2O(1)],其结构和性能经IR,元素分析,FL,X-射线单晶衍射和TG表征。实验结果表明:1具有较好的热稳定性;在336 nm紫外光激发下,1分别在484 nm(4F9/2→6H15/2)和576 nm(4F9/2→6H13/2)处发射Dy(Ⅲ)的特征荧光。     

3-Trifluoromethyl- and 3-difluoromethyl-thalidomides

Syntheses of racemic 3-trifluoromethyl- and 3-difluoromethyl-thalidomide starting from 2-(tert-butyloxycarbonylimino)-3,3,3-trifluoropropionate or -3,3-difluoropropionate as fluorine-containing building blocks are described.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

白光LED用荧光材料Ba3 Gd( BO3 )3:Eu3+的发光性能研究

用高温固相反应法制备了稀土离子Eu3+ 掺杂的三元稀土硼酸盐Ba3Gd(BO3)3发光材料, 通过X射线衍射 (XRD) 、荧光光谱和扫描电镜 (SEM) 等测试手段对Ba3Gd(BO3)3:Eu3+ 荧光粉的制备条件、发光性能以及形貌进行了研究. XRD结果表明, 在1000 ℃时可得到Ba3Gd(BO3)3 纯相. 扫描电镜照片显示颗粒基本为球形, 粒径约为200～400 nm. 发光光谱测试表明, Ba3Gd(BO3)3:Eu3+荧光粉在近紫外区(UV) (396 nm)和蓝光区(466 nm)可以被有效地激发, 分别用255和396 nm的紫外光激发样品时, 以Eu3+ 的 5D0-7F2 (611和616 nm) 超灵敏跃迁为主要发射峰. 当Eu3+的掺杂浓度为10%(摩尔分数)时, Ba3Gd(BO3)3:Eu3+ 在611和616 nm处的发光强度最大. 因此, 这种荧光粉是一种可能应用在白光LED上的红色荧光材料.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Electrochemical oxidation of 3-imidazoline 3-oxides

Cyclic voltammetry was used to study the electrochemical oxidation of substituted 3-imidazoline 3-oxides. It was determined that the oxidation potentials (E _p/2) of the compounds depend on the nature of the substituents in the 1 and 4 positions of the ring. A correlation analysis ofE _p/2 of the the compounds and _I and _R of the substituent constants in the 4 position of the ring was carried out. The obtained results show that oxidation of 3-imidazoline 3-oxides can occur at the nitrone or amine fragment, depending on the nature of the substituent in the 1 position of the ring.Institute of Organic Chemistry, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2545–2550, November, 1992.     

Photoluminescent Property Effect of Sc3+ on Er3+/y3+/yb3+ Doped Al2O3 Powders

The photoluminescence (PL) property effect of Sc3+ on the Er3+/Y3+/Yb3+ doped Al2O3 powders prepared by sol-gel method has been investigated. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) implied that the distribution of dopants (Er3+ , Y3+ , Yb3+ , Sc3+) was improved effectively with the rise of Sc3+ concentration. The Fourier transform infrared spectra (FTIR) results demonstrated that the ligand around the quenching center -OH and the population of -OH were altered by introducing different amounts of Sc3+ . The PL intensity centered at 1530 nm was increasingly improved with the rise of Sc3+ concentration, as well as the corresponding full widths at the half maximum (FWHM) and lifetime. The optimized PL intensity was 4.7 times higher than that non-Sc3+ doped sample for the Al2O3 powders codoped with 10mol% Sc3+ . This material can be promising candidates for optical fiber amplifier.     

Er^3＋／Yb^3＋：Sr3Y2（BO3）4晶体的光谱和激光性质

采用提拉法生长了双掺Yb3+和Er3+离子浓度分别为18.63%和0.87%(原子分数)的Sr3Y2(BO3)4晶体.利用测量的偏振吸收谱结合Judd-Ofeh理论,拟合得到了该晶体中Er3+离子的偏振和有效J-O参数.测量了Er3+离子4I13/2能级和Yb3+离子2F5/2能级的荧光衰减曲线,并计算了4I13/2能级的荧光量子效率和Yb3+到Er3+的能量传递效率.利用Fuchtbauer-Ladenberg公式计算了Er3+离子4I13/2→4I15/2跃迁的偏振受激发射截面.在平-凹谐振腔中,利用97nm波长光纤耦合准连续半导体激光端面泵浦1.12mm厚的该晶体,当输出镜透过率为1.5%时,获得了最大输出功率为1.3 w和斜率效率为20%的1560 nm附近的激光输出.结果表明,Er3+/Yb3+:Sr3+Y2+(BO3)4晶体是一种优良的1.5～1.6 μm波段激光的增益介质.     

3-Acylaminopyrazole derivatives via a regioselectively N-protected 3-nitropyrazole

A simple procedure for the selective protection of the endocyclic 1-N of 3-aminopyrazoles as tert-butoxycarbamate (Boc) in good yield is described. A 3-nitropyrazole derivative represents the key intermediate with the nitro substituent determining the regiochemistry of the obtained protected compound. Subsequent acylation at the exocyclic amino group gave rise, after Boc removal, to a series of 3-acylaminopyrazoles in high yields and purities.     

Etude du Systeme LiPO3-Pr(PO3)3 Donnees sur LiPr(PO3)4

The LiPO₃-Pr(PO₃)₃ system was studied by micro-differential thermal analysis. The only new compound observed in the system was LiPr(PO₃)₄, melting incongruently at 1246 K. An eutectic appears at 926 K. Crystallographic data and powder diagram of the new compound are given. LiPr(PO₃)₄ crystallizes in the C2/c monoclinic system with unit cell: a=16.428(6), b=7.054(3), c=9.747(4) Å, β=126°31′(3), V=910.2 ų, Z=4. The IR and Raman spectra of this compound are given. This revised version was published online in July 2006 with corrections to the Cover Date.