替格瑞洛中间体的合成

以(3a S,4R,6S,6aR)-6-羟基-2,2-二甲基-四氢-3a H-环戊烷并[d][1,3]-二氧环戊烯-4-氨基甲酸苄酯为原料,经烯丙基取代、双键双羟基化、Smith降解、脱保护基和成盐反应,合成了替格瑞洛中间体(3a S,4R,6S,6aR)-6-(2-羟基乙氧基)-2,2-二甲基-四氢-3a H-环戊烷并[d][1,3]-二氧环戊烯-4-氨基草酸盐,总收率56.0%,其结构经1H NMR,13C NMR和ESI-MS确证。     

替格瑞洛的合成工艺改进

以2-丙硫基-4,6-二氢-5-氨基嘧啶和2-{［(3aR,4S,6R,6aS)-6-氨基-2,2-二甲基四氢-3aH-环戊基［d］［1,3］二氧-4-基］氧}-1-乙醇L-酒石酸盐为原料,经C-N偶联,亲核取代和环合反应制得2-{［(3aR,4S,6R,6aS)-6-(7-氯-5-丙硫基-3H-［1,2,3］三唑［4,5-d］嘧啶-3-基)-2,2-二甲基四氢-3aH-环戊基［d］［1,3］二氧-4-基］氧}-1-乙醇(4); 4与(1R,2S)-2-(3,4-二氟苯基)环丙胺D-扁桃酸盐经亲核取代反应后酸解脱除丙酮叉保护基合成替格瑞洛,总收率58.7%,纯度99.2%,其结构经¹H NMR, MS(ESI)和XRD确证。     

替拉瑞韦的合成工艺改进

(2S)-2-环己基-N-(2-吡嗪基羰基)甘氨酰-3-甲基-L-缬氨酸(2)与(1S,3aR,6a S)-八氢环戊烯并[c]吡咯-1-羧酸乙酯盐酸盐(3)缩合得到(1S,3aR,6a S)-2-((2S)-2-(((2S)-2-环己基-2-(吡嗪羰基)氨基)乙酰基)氨基)-3,3-二甲基-1-氧代丁基)-八氢环戊二烯并[c]吡咯-1-羧酸乙酯(5),5水解得到(1S,3aR,6a S)-2-((2S)-2-(((2S)-2-环己基-2-(吡嗪羰基)氨基)乙酰基)氨基)-3,3-二甲基-1-氧代丁基)-八氢环戊二烯并[c]吡咯-1-羧酸(6),此中间体再与(3S)-3-氨基-N-环丙基-2-羟基己酰胺盐酸盐(4)经过酰胺化、戴斯-马丁氧化得到替拉瑞韦(1),反应总收率为64%,HPLC色谱纯度99.9%。     

利用Reformatsky反应合成1-β-碳氢霉烯类抗生素中间体

以(2R)-3-[(3S,4R)-1-(叔丁基二甲基硅氧基)乙基]-4-乙酰氧基氮杂环丁-2-酮为母体,2-溴乙(丙)酸酯或2-溴丙酰胺为亲核试剂,通过Reformatsky反应合成了一系列新型的1-β-碳氢霉烯类抗生素中间体——3-{(2R)-2-[(3S,4R)-1-(叔丁基二甲基硅氧基)乙基]氮杂环丁-2-酮-4-基}乙(丙)酸酯(3a～3d)和3-{(2R)-2-[(3S,4R)-1-(叔丁基二甲基硅氧基)乙基]氮杂环丁-2-酮-4-基}-N,N-二取代丙酰胺(3e,3i和3k),其结构经1H NMR和13C NMR表征,其中3a～3e和3i未见文献报道。     

水溶性稠杂环均三唑并噻二唑体系的合成及生物活性(I): 哌嗪取代衍生物

4-氨基-5-吡啶-4-基-均三唑硫醇(1)在复合催化剂DMAP和TBAB作用下与对卤代苯甲酸经环缩合反应以高收率得到中间体6-(5-氯-3-甲基-1-取代苯基-1H-吡唑-4-基)-3-吡啶-3-基-均三唑并[3,4-b][1,3,4]噻二唑(2a～2c), 接着苯环卤原子与取代哌嗪在聚乙二醇催化作用下发生亲核取代反应得到相应的哌嗪游离碱(3a～3c). 其中, 单取代哌嗪游离碱3a与含功能基的卤代物缩合得到功能基取代的哌嗪衍生物(4a～4g). 这些产生的游离碱与盐酸反应得到相应的水溶性盐酸盐. 所合成新化合物的结构经元素分析和光谱数据表征, 并评价了它们的体外抗菌活性及构效关系.     

1-(1-乙基-1H-5-吲哚基)-2-苯基-1,2-二酮缩合成1,2,4-三嗪类化合物反应

报道了一种1-(1-乙基-1H-5-吲哚基)-2-苯基-1,2-二酮与氨基胍碳酸氢盐缩合生成互为同分异构体的两种1,2,4-三嗪的反应,并通过运用目标定向合成和核磁的方法,研究了1,2-二酮苯环上不同取代基对反应产品比例的影响.反应总收率为40%~81%,且当不对称1,2-二酮苯环上无取代基时,其生成的同分异构体6-(1-乙基-1H-5-吲哚基)-5-苯基-3-氨基-1,2,4-三嗪(2a)和5-(1-乙基-1H-5-吲哚基)-6-苯基-3-氨基-1,2,4-三嗪(4a)比例为40∶60;当苯环上取代基为吸电子基时,6-(1-乙基-1H-5-吲哚基)-5-(4-硝基苯基)-3-氨基-1,2,4-三嗪(2b)和5-(1-乙基-1H-5-吲哚基)-6-(4-硝基苯基)-3-氨基-1,2,4-三嗪(4b)比例为63∶37;当苯环上取代基为供电子基时,绝大部分生成2系列构型结构.     

含吡啶环系西佛碱大环配合物和氮杂大环自由配体的合成

2, 6-二羟甲基吡啶(1)经活性MnO~2氧化得到2, 6-二甲酰基吡啶(2)。邻硝基苯酚与N-取代的二(氯乙基)胺在DMF溶液中反应, 得到N-取代的1, 5-二(邻硝基苯氧基)-3-氮杂戊烷(3a～3c), 再经水合肼/Raney Ni还原, 获得N-取代的1, 5-二(邻氨基苯氧基)-3-氮杂戊烷(4a～4c)。利用Ba^2^+作为模板离子, (2)分别与(4a～4c)反应, 合成了一类新的含吡啶环系西佛碱大环配合物I-III, 配合物I、III与NaBH~4的乙醇溶液还原解络, 得到氮杂大环自由配体IV和V。所有西佛碱大环配合物和氮杂大环自由配体均经元素分析、IR、^1H NMR、MS等证实了它们的结构和组成。     

2-(2′-氨基苯基)苯并咪唑衍生物分子内质子转移理论研究:取代基效应

研究了2-(2′-氨基苯基)苯并咪唑(APBI)氨基中一个H被CH3(E-C),SiH3(E-OSi),NH2(E-N),COH(E-CO),NO2(E-NO2),CF3(E-F),CN(E-CN3),OMe(E-OMe),COCH3(E-CC),Ts(E-S),p-CH3C6H4CO(E-C=O)和p-CH3C6H4NHCO(E-NH)取代后,其基态及激发态分子内质子转移(ESIPT)性质的变化规律.结果表明各衍生物基态最稳定构型为烯醇式构型E,次稳定构型旋转异构体R,酮式构型K只有当取代基为E-CN3,E-F,E-NO2,E-N,E-OMe和E-S时才存在.基态各环的核独立化学位移(NICS)研究表明取代基的引入会影响APBI环电子离域性.所有APBI衍生物都能发生激发态分子内质子转移,当引入取代基为E-CN3,E-N或E-OMe时,所得的APBI衍生物S1态分子内质子转移是无能垒过程;引入取代基为E-C,E-C=O或E-OSi时,对APBI的ESIPT势能面基本无影响,而当取代基为E-CC,E-NH,E-CO,E-F,E-NO2和E-S时,使得S1态APBI的K*构型能量低于E*.     

N-水杨醛腙修饰11-氮杂青蒿素衍生物的合成及性质研究

合成了N-水杨醛腙修饰的11-氮杂青蒿素及去氧类似物.采用紫外、荧光、核磁共振以及分子模拟等技术分析了二聚体(3R,5a S,6R,8a S,9R,12S,12a R)-11-(((E)-2-羟基-5-(4-羟基-3-((E)-(((3R,5a S,6R,8a S,9R,12R,12a R)-3,6,9-三甲基-10-氧代十氢-3,12-环氧[1,2]二氧杂[4,3-i]异喹啉-11(12H)-基)亚氨基)甲基)苄基)亚苄基)氨基)-3,6,9-三甲基十氢-3,12-环氧[1,2]二氧杂[4,3-i]异喹啉-10(3H)-酮(3)的优势构像;探索了它与血红素的作用行为;研究了它与杯[4]咔唑的结合、识别及被增溶性能.结果表明,因水杨醛腙键的OH与席夫碱N原子之间的分子内氢键作用,3呈现分子钳状的优势构像,使其得以识别血红素.此外, 3可被杯[4]咔唑的疏水空腔封装,且结合作用强(结合常数Ka=2.8×105 L·mol-1),因而其水溶性得以改善,这为今后生物活性测试奠定了基础.     

杂环光化学IV.1,2,4-三氮杂-双环[4.2.0]辛烷衍生物的光化学合成

通过1,3-二甲基-6-氮杂胸腺嘧啶与含极性取代基的烯类化合物的光环合加成反应,合成了1,2,4-三氮杂-2,4,6-三甲基-3,5-二氧-8-乙酰基-双环[4.2.0]辛烷的三个差异构体(6R,8S)-1a,(6S,8R)-2a和(6R,8R)-3a;1,2,4-三氮杂-2,4,6-三甲基-3,5-二氧-8-氰基-双环[4.2.0]辛烷的两个差相异构体(6S,8R)-2b和(6R,8R)-3b以及1,2,4-三氮杂-2,4,6-三甲基-3,5-二氧-8-羧甲酯基的两个差相异构体.讨论了该反应的区域选择性,以及产物的立体化学。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.