高温二维液相色谱系统的构建及其评价

在二维液相色谱中, 第二维的分离速度是制约其发展的重要因素. 升高色谱柱温度可以有效降低流动相粘度, 加快溶质在两相间的传质速率, 有效加快分析速度. 以离子交换色谱法(WAX)为第一维分离模式和反相色谱法(RP)为第二维分离模式, 十通阀和两个捕集柱为接口, 通过将第二维色谱柱温度升高到80 ℃和提高流量到3 mL/min, 构建了高温WAX/RP二维液相色谱系统. 以4种标准蛋白的酶解物为样品评价系统的分离性能, 第一维共有33个馏分被捕集并导入到第二维分析, 高温二维液相色谱系统识别出187个色谱峰.     

某些酚类的高温液相色谱行为

建立了高温液相色谱系统,在高温条件下,采用甲醇-水作为流动相,在Polymerx RP-1聚合物(PSDVB)色谱柱上考察了6种酚类样品的色谱行为.实验条件:温度40～160 ℃,流速0.2～5.5 mL/min,流动相中甲醇浓度范围40%～80%.考察了温度、流速和流动相组成对酚类样品的保留、分辨、柱效和系统压力的影响,探讨了酚类样品在聚合物柱上的热力学行为.温度升高2.35℃大约相当于流动相中甲醇浓度增加1%,可以通过改变色谱柱温度调节样品保留和改变选择性.柱温升高,降低了流动相的粘度,允许在高温条件下使用较高的流速实现快速分离.在160℃、V(甲醇):V(水)=40:60,为流动相和3 mL/min流速条件下,可于2.5 min内实现6种酚类的完全分离.     

C18柱串联冠醚手性柱高效分离3种芳香族氨基酸对映体

将C18柱与手性冠醚柱串联,建立了一种反相高效液相色谱法用于3种芳香族氨基酸对映体同时拆分的方法.考察了反相色谱流动相的组成、pH值、柱温、流速对对映体拆分的影响.实验结果表明,当流动相为HClO4-乙睛溶液(86:14,V/V,pH 2.0)、柱温20℃、流速0.4 mL/min时,3种氨基酸对映体可获得基线分离.进一步对比了C18柱、冠醚手性柱和串联顺序不同的4种分离模式,结果表明,C18柱不能拆分氨基酸对映体,仅能分离不同种类氨基酸;冠醚手性柱可分离氨基酸映体,但不同种类氨基酸色谱峰出现重叠;串联模式能实现3种氨基酸对映体的基线分离,实现双柱优势互补,而串联顺序对分离影响不大,仅影响色谱峰的峰形.     

超临界流体色谱对吴茱萸中吲哚类生物碱的快速分析

建立了超临界流体色谱快速分析吴茱萸中吲哚类生物碱的方法。以标准品混合物和复杂样品为对象比较4种色谱柱的分离效果,进行色谱柱的筛选;考察了进样体积、改性剂、添加剂、温度和背压对保留行为的影响。结果表明,进样体积对峰形影响显著;添加剂对保留时间和色谱峰形影响有限;改变改性剂能使保留时间显著改变;降低温度,升高背压,保留时间减小。经过优化,确定采用Waters ACQUITY UPC² BEH色谱柱,以甲醇为改性剂,在35 ℃柱温和2.07×10⁷ Pa背压条件下,15 min内完成复杂样品的分析。同时采用超高效液相色谱完成复杂样品的快速分析。结果表明,超临界流体色谱可用于天然产物的高效快速分析,同时该方法与超高效液相色谱在分离选择上的差异有助于天然产物分析方法的拓展。     

密闭舱内VOCs现场快速定量检测技术与装置研究

该文发展了可对压强变化的密封舱实现计量采样-富集的采样技术,基于薄壳金属筒式低功耗均温色谱柱组件,结合微池热导检测器/小型氢火焰离子化检测器,建立了一种对密闭舱内挥发性有机物(VOCs)进行现场快速定量检测的方法和装置。根据负压罐和密封舱的压强差值和绝压值以及温度,计算出有效采样体积(折算到标准大气压),进而计算出富集倍数。当有效采样体积为100 mL时,对甲苯的富集倍数大于400倍。所研制的色谱柱组件将色谱柱紧密排绕在薄壳式金属筒外层,加热丝紧密排绕在金属筒内侧,可实现小于0.4℃的均温效果和40℃/min的程序升温速率。在以10℃/min加热至300℃过程中,功耗低于35 W,300℃恒温加热功率仅需28 W。将色谱柱组件的分离性能(包括半峰宽、柱效、分离度和重复性)与实验室进口色谱仪炉箱得到的结果进行对比,发现两种加热方式得到的色谱分离性能相当。采用多种VOCs样品对采样-富集性能进行评价。在高速分离模式下,5 min内可实现53种VOCs的快速分离,半峰宽均小于0.8 s。研制出的整机已应用于烃类、苯系物、醇类、醛酮类等多种VOCs的快速分析,并与商品化便携式气相色谱或气相色谱-质谱的性能参数进行了对比,结果满意。     

多维气相色谱法提高丙烯腈色谱分析速度的方法

采用多维气相色谱法,既可提高丙烯醛、丙酮、乙腈、丙烯腈相邻两组分的分离度,又可提高分析速度。按GDX-502与402的体积比为85∶15比例混装长4.5m、内径3mm的色谱柱;氢气作为载气,流速为65mL/min;柱箱初温140℃保持15min,以15℃/min的速率升至180℃保持12min。丙烯腈样品中7种组分即可全部出峰,总分析时间为30min,比原国标推荐的方法缩短了近50min。     

高效液相色谱分析法测定色氨酸对映体

采用高效液相色谱法,以手性冠醚Crownpak CR( )为固定相、高氯酸溶液/甲醇混合溶液为流动相,成功地实现了色氨酸(Trp)对映体的色谱分离.考察了流动相中甲醇含量、流量和柱温等因素对分离效果的影响.研究表明,适当提高流动相中的甲醇含量、降低流动相流量、降低柱温可以有效地提高分离度.另一方面,提高流动相中的甲醇含量、提高流动相流量、升高柱温可以显著地缩短样品的保留时间.确定了一种最佳分析分离条件,即流动相为甲醇∶高氯酸溶液=15∶85(V/V),流动相流量0.8 mL/min,柱温20℃,波长220 nm,在此条件下进行色谱分离,样品的保留时间小于12 min,分离度达到2.06.该方法具有快速、高效、准确和精密度高等优点.     

三聚氰胺在双色谱柱串联模式下的色谱保留研究

研究了亲水相互作用色谱柱串联C_(18)柱上三聚氰胺的色谱保留,并应用牛奶基质中三聚氰胺的高效分离。将HILIC柱与C_(18)柱串联,研究不同色谱柱串联顺序及色谱分离条件下三聚氰胺的保留情况,结果表明:当流动相为乙腈-乙酸铵(10mmol/L)=85∶15(v/v)、柱温30℃、流速0.75mL/min、检测波长220nm、HILIC柱在前C_(18)柱在后串联时,三聚氰胺分离效果最佳。在最佳的色谱条件下,对市售牛奶进行测定,未检测出三聚氰胺,加标回收率在81.1%～119%,三聚氰胺在双柱模式下分析效果良好。     

蛋白蛋分离与纯化过程中高效离子交换色谱柱的再生

高效离子交换色谱法分离和纯化蛋白质时,蛋白质在色谱柱上的不可逆吸附使柱效降低,柱压升高。本文使用2％的胰蛋白酶溶液在37℃下处理TSKgelCM-5PW和TSKgelDEAE-5PW（7×7．5mmI.D.）离子交换色谱柱24h后,柱压显著降低,柱效提高4~13倍,交换容量也得到恢复。离子交换色谱柱的恢复程度和交换容量与处理液的用量有关。     

IEX/RP二维液相色谱中弱保留组分收集模式的构建及系统评价

以十通阀和捕集柱接口形式,构建了弱阴离子交换/反相(WAX/RP)二维液相色谱分离系统.通过将第一维离子交换色谱分析中的前部集中洗脱出的弱保留组分收集后单独分析,剩余样品进一步采用二维液相色谱分析,可以有效避免第二维色谱柱对特殊样品局部集中流出导致的第二维分离超柱容量问题,提高了系统的整体分离能力.使用4种蛋白胰蛋白酶酶解后的多肽样品评价该系统,在不分流的系统中共检测到115个峰.对第一维分离的前15 min分流后得到的组分单独分析,共识别出58个峰,后续的二维分离中共得到78个峰.2种方法相比,第二种方法检测峰数增加了21个,一些低丰度的组分在弱保留组分收集后被识别.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.