碳纳米管负载的Co-Mo催化剂的HDS性能研究

应用X射线衍射(XRD)、程序升温还原(TPR)技术对等体积浸渍法制备的Co—Mo／CNT催化剂进行了表征，采用高压微反装置、以二苯并噻吩为模型化合物，对催化剂进行了HDS活性评价，XRD结果表明：260℃条件下处理催化剂，催化剂的表面物种主要是MoO3，表面物种高度分散；500℃焙烧处理的催化剂的表面物种主要是MoO2，同时在Co—Mo／CNT催化体系中出现了CoMoO3和Co2Mo3O03物种的强衍射峰，高温焙烧时催化剂活性组分在碳纳米管的表面容易聚集形成MoO2等晶体，TPR结果表明：在Co-Mo／CNT催化剂中，表面物种的还原温度低于Co—Mo／γ—Al2O3中物种的还原温度，活性评价表明：催化剂的TPR特性和加氢脱硫活性有很好的对应关系，Co—Mo／CNT具有很高的加氢脱硫选择性，并且活性明显高于Co—Mo／γ—Al2O3催化剂。     

硫代硫酸铵预硫化的Mo/Al2O3催化剂加氢脱硫反应性能研究

研究了新型固体硫化剂硫代硫酸铵对加氢脱硫催化剂的预硫化。采用浸渍法将硫代硫酸铵负载在Mo/Al₂O₃模型催化剂上制备出预硫化的催化剂。通过X射线衍射、还原气氛的热重质谱联用和光电子能谱等表征手段研究了预硫化催化剂的物相、活化以及反应后催化剂的表面成分。结果表明,硫代硫酸铵中不同价态的硫在催化剂活化过程中起到不同作用,S^2-硫化活性金属,S⁶⁺修饰载体,减少载体与活性金属的相互作用,促进硫化。不同S/Mo摩尔比的预硫化催化剂经原位氢气活化用于噻吩加氢脱硫反应,S/Mo摩尔比为3的预硫化催化剂显示出最好的加氢脱硫活性,预硫化催化剂比Mo/Al₂O₃催化剂的脱硫活性提高17%。     

免预硫化的加氢脱硫MoNiP/Al2O3催化剂的制备和表征

在Mo-Ni-P-O浸渍液中添加一定量的极性有机物如柠檬酸等,采用共浸渍法制备了一种不需预硫化和焙烧也具有较高加氢脱硫活性的MoNiP/Al2O3催化剂,并用N2吸附、程序升温还原、X射线光电子能谱、红外光谱和元素分析对催化剂进行了表征.结果表明,柠檬酸的添加削弱了金属组分与载体间的相互作用,有利于金属组分在载体表面的分散,且改善了催化剂的还原性,使催化剂在与含硫反应物料接触过程中自发硫化,从而有利于催化剂加氢脱硫活性的提高.     

超声波-微波法制备NiW/Al2O3加氢脱硫催化剂

 采用一次浸渍技术制备了NiW/Al2O3加氢脱硫(HDS)催化剂,在制备过程中采用超声波处理浸渍液,采用微波进行样品干燥. 以噻吩为模型化合物,在微反装置上评价了该催化剂的加氢脱硫活性. 使用X射线光电子能谱和透射电镜等表征手段研究了催化剂的表面状态和物化性. 结果表明,使用超声波及微波技术制备的NiW/Al2O3催化剂具有较高的加氢脱硫活性,催化剂的活性组分较易硫化,可生成更多的硫化物种参与反应. 催化剂中硫化态钨的表面原子浓度较高,从而使硫化态钨物种保持较高的表面分散度,有利于增加活性中心的数目. 该催化剂的活性中心结构具有较多配位不饱和的边缘位和棱边位,因而具有较高的加氢脱硫活性.     

Mo助剂含量对Mo-Ni2P/SBA-15/堇青石整体式催化剂加氢脱硫性能的影响

 采用共浸渍法制备了 P/Ni 摩尔比为 2 的 Ni2P/SBA-15, 再通过二次浸渍引入助剂 Mo 制得 Mo-Ni2P/SBA-15, 将它调制成活性胶后均匀涂敷于预处理后的载体表面, 干燥焙烧后在氢气流中采用程序升温还原法, 制备了一系列 Mo-Ni2P/SBA-15/堇青石整体式催化剂. 采用 X 射线衍射、N2 吸附-脱附和 X 射线光电子能谱对催化剂结构进行了表征, 以二苯并噻吩为模型含硫化合物, 考察了催化剂的加氢脱硫性能. 结果表明, Mo 的加入增大了催化剂的比表面积, 在催化剂表面形成了 MoNiP2, 且 Ni2P 为主要活性物相. Mo 在催化剂表面主要以 Mo6+和 Moδ+形式存在; 当 w(Mo) = 4.2% 时, n(Mo)/n(Ni+Mo) = 0.18 的整体式催化剂上二苯并噻吩的转化率最高, 且在较低反应温度时以直接脱硫机理为主, 而较高反应温度时以加氢脱硫机理为主.     

聚合物固载Co-Pd 催化剂的结构与活性

采用溶剂化金属原子浸渍(SMAI)法制备了几种不同金属含量的Co Pd催化剂,用X射线衍射、X射线光电子能谱和磁测定对催化剂进行表征,并与普通浸渍法(CI)制得的相同金属含量的催化剂进行比较.结果表明SMAI法制备的催化剂金属粒度小于CI法制备的催化剂,且前者零价金属含量高于后者.SMAI法制备的催化剂Co在表面上富集,而CI法制备的催化剂Co在表面和体相的金属含量基本相同.在二丙酮醇加氢及电催化反应中, SMAI法催化剂比相同组成的CI法催化剂具有更高的催化活性.     

Dibenzo二苯并噻吩在负载型 CoMoN_x/γ-Al2_O_3催化剂上的加氢脱硫

用浸渍法制备出γ- Al2 O3 负载不同 Co/( Co+ Mo)比的 Co Mo氧化物 ,以其作为前驱体 ,在 N2 - H2混合气体中程序升温反应 ,合成出一系列 Co Mo Nx/γ- Al2 O3 催化剂 .用二苯并噻吩 ( DBT)的加氢脱硫作为模型反应 ,评价了催化剂的催化活性和选择性 .研究表明 ,Co Mo Nx/γ- Al2 O3 催化剂催化 DBT的脱硫有两条途径 :一是直接氢解脱硫 ,产物为联苯 ;另一途径是 DBT上的苯环先加氢然后脱硫 ,主要产物是环己基苯 .其中 ,第一条途径为主要反应 .不同的预处理条件对催化剂的活性和选择性有明显影响 ,预还原并未提高催化剂的活性 ,预硫化却减低了产物的选择性 .在较宽的 Co/( Co+ Mo)比范围内 ,Co Mo Nx/γ- Al2 O3催化剂都显示出较高的催化活性     

硫代硫酸铵预硫化的Mo/AC催化剂加氢脱硫性能的研究

采用等体积浸渍法将硫代硫酸铵(ATS)负载在Mo/AC催化剂上,制备了器外预硫化的Mo/AC-ATS催化剂;以噻吩加氢脱硫(HDS)为探针反应,考察了活化温度和活化时间对预硫化催化剂加氢脱硫活性的影响。研究发现,300 ℃下活化0.5 h所得到的预硫化催化剂具有最好的加氢脱硫活性。与传统硫化剂CS₂和DMDS硫化的催化剂相比,采用Mo/AC-ATS催化剂,在最佳活化条件下,噻吩转化率分别提高了34%和42%。XPS、TPR-MS和TEM等表征结果显示,预硫化的Mo/AC-ATS催化剂中Mo⁴⁺含量较高,这是其具有较高加氢脱硫活性的主要原因。     

加氢处理催化剂的制备和表征 Ⅱ.制备方法对MoNiP/Al2O3催化剂性质的影响

 从实用的角度出发,比较了不同制备方法（干混法、干混－浸渍法和共浸渍法）对MoNiP／Al2O3催化剂性质的影响．结果表明,采用干混法制备的催化剂,活性金属（Mo,Ni）在其表面上虽然有较高的分散度,但其分散状态较差,因而影响其催化活性;采用干混－浸渍法和共浸渍法制备的催化剂,可以克服上述缺点,使活性金属在其表面上既有较高的分散度,又有优良的分散状态,因而催化活性较高．此外,采用干混－浸渍法制备的催化剂,有较大的比表面积和较大的孔容,而采用共浸渍法制备的催化剂,有较大的孔直径和较高的机械强度．活性评价实验结果表明,MoNiP／Al2O3催化剂的最佳焙烧温度为450℃．     

模型石脑油在硫化Co-Mo／SBA-15催化剂上的加氢异构化反应

通过浸渍法制备了Co/SBA-15、Mo/SBA-15和Co-Mo/SBA-15催化剂,对催化剂的孔结构、物相及表面酸性进行了表征,测定了硫化催化剂上噻吩加氢脱硫及1-己烯加氢异构的反应性能,并与工业Co-Mo/γ-Al2O3催化剂进行了对比.结果表明,Co-Mo/SBA-15催化剂表面具有较强的B酸中心,且对噻吩加氢脱硫具有较高的催化活性;而Co-Mo/γ-Al2O3催化剂表面主要为较强的L酸中心,对1-己烯加氢具有较高的催化活性.Mo/SBA-15催化剂的B酸酸性较强,但同时具有较高的1-己烯加氢活性,故它对1-己烯骨架异构的催化活性不高.Co-Mo/SBA-15催化剂的加氢活性相对较低,1-己烯容易在其较强的B酸中心上发生骨架异构反应,具有潜在的工业化应用前景.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.