AlMCM-41负载Ni催化剂的正十二烷加氢转化反应性能研究

采用N_2脱附、XRD，NH_3-TPD和H_2-TPR等手段表征中孔分子筛AlMCM-41负载 Ni催化剂。结果表明，AlMCM-41负载Ni后会导致中孔分子筛骨架部分塌陷，孔道有 序度降低，而且，Ni与载体的相互作用随着载体中铝含量的增加而增强。此外，催 化剂的表面酸性以弱酸和中强酸为主。正十二烷加氢转化反应评价表明，在催化剂 Si/Al比为17.4 ～ 38.7范围内，随着铝含量的减少，氢解副反应加剧，正十烷的 转化率逐渐升高，异构选择率则以先增加后减小的趋势变化，在Si/Al=23.2时达到 最大值。当Si/Al比为17.4时，催化剂的酸/金属功能呈现较好的匹配，正十二烷裂 解产物以C_6为中心呈对称分布且i/n-(C_4～C_9)比例较高。     

嫁接Al改性MCM-41介孔分子筛催化合成双酚F

以十六烷基三甲基溴化铵和正硅酸乙酯为原料,合成纯硅MCM-41介孔分子筛。 再利用九水硝酸铝为改性剂来嫁接改性纯硅MCM-41介孔分子筛,NH3-TPD结果表明,嫁接后的AlMCM-41产生了中强酸。 用改性后不同n(Si)/n(Al)的AlMCM-41催化合成双酚F,在n（苯酚）/n（甲醛）=30、反应时间5 h、反应温度90 ℃、m（甲醛）/m（AlMCM-41）=7的反应条件下,在一定范围内,双酚F的产率随Al含量增加而增加,但在n（Si）/n（Al）＜50时,双酚F的产率反而下降,当n（Si）/n（Al）=50时,双酚F的产率最高,为42.28%。     

嫁接Al改性MCM-41介孔分子筛催化合成双酚F

以十六烷基三甲基溴化铵和正硅酸乙酯为原料,合成纯硅MCM-41介孔分子筛。再利用九水硝酸铝为改性剂来嫁接改性纯硅MCM-41介孔分子筛,NH3-TPD结果表明,嫁接后的AlMCM-41产生了中强酸。用改性后不同n(Si)/n(Al)的AlMCM-41催化合成双酚F,在n(苯酚)/n(甲醛)=30、反应时间5 h、反应温度90℃、m(甲醛)/m(AlMCM-41)=7的反应条件下,在一定范围内,双酚F的产率随Al含量增加而增加,但在n(Si)/n(Al)50时,双酚F的产率反而下降,当n(Si)/n(Al)=50时,双酚F的产率最高,为42.28%。     

AlMCM-41介孔分子筛的合成及表征

以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.     

负载型中孔分子筛上苯与长链烯烃烷基化反应

在合成纯硅及含铝MCM-41中孔分子筛基础上,制备负载PW12、SiW12及PMo12杂多酸的催化剂。用XRD、N2吸附和苯与1-十二烯烷基化反应对几种催化剂进行表征。结果表明,与HY、HM和Hβ分子筛相比,HAlMCM-41和HSiMCM-41中孔分子筛具有较好的线性烷基苯选择性,其苯基十二烷异构体分布优于HY而不及HM和Hβ分子筛;负载型中孔分子筛催化剂具有杂多酸分散性好、比表面积大和孔径分布集中的性质,与载体相比其催化活性明显提高;关于催化活性,负载型催化剂载体或负载杂多酸种类比较结果为HAlMCM-41>HSiMCM-41、PW12>SiW12>PMo12,其中SiW12HAlMCM-41催化剂的苯基十二烷选择性和异构体分布为最佳。     

低硅铝比ZSM-48分子筛合成及其正构十二烷临氢异构催化性能研究

通过静态水热合成法,溴化六甲二铵作为结构导向剂合成出系列低硅铝比的ZSM48沸石分子筛(Si/Al100),所合成样品中最低硅铝比为38.6(ICP-AES),这将拓宽ZSM-48高硅沸石分子筛的应用范围。制备Pt负载双功能催化剂,用于正构十二烷临氢异构催化反应。结果表明,硅铝比的改变可以影响催化剂的活性,投料硅铝比为70的双功能催化剂具有最优的催化性能,但硅铝比改变对异构产物的分布没有明显的影响,其异构产物以支链在中间位的异构体为主。     

AlMCM-48介孔分子筛的合成研究

采用正硅酸乙酯为硅源,十六烷基三甲基溴化铵作模板剂合成MCM-48介孔分子筛.用Al(NO3)3溶液浸渍MCM-48从而获得AlMCM-48.用XRD、27AlNMR对样品进行了表征.这种方法掺杂铝不破坏分子筛骨架结构,Si/Al低至5时分子筛结构保持完好.其中部分铝进入了骨架.     

基于原位合成的Ni/Mg@MCM-41上的CO2甲烷化研究

通过原位引入Mg一步法合成了Mg@MCM-41复合介孔材料,并将其作为载体制备了高性能Ni基CO_2甲烷化催化剂。通过BET、XRD、TEM、CO_2-TPD、TG等手段对催化剂进行了表征分析,着重比较了Mg/Si物质的量比对于催化剂特性的影响。结果表明,当Mg/Si物质的量比为0.05时能够在不破坏孔道结构的前提下显著增加催化剂上的碱性位,有效地提高了催化剂对CO_2的吸附和活化,从而促进CO_2甲烷化反应过程中反应物的转化。实验所制得的催化剂均具有较好的热稳定性和催化反应活性,其中,Ni/0.05Mg@MCM-41在CO_2甲烷化反应表现出最优的催化性能,在320℃,1 MPa的条件下,CO_2转化率和CH_4选择性分别高达84.3%和97.8%。     

SAPO-11的制备及十八烷异构性能研究

采用水热法合成出不同硅铝比的SAPO-11分子筛,负载Pt后的催化剂在固定床反应器上对正十八烷进行临氢异构化反应。采用XRD、BET、SEM、TEM和NH3-TPD对载体及催化剂进行表征。考察了Si含量的变化对正十八烷临氢异构性能的影响。通过改变温度、压力、空速以及氢油比等反应参数,考察了硅铝比为0.3的0.5%Pt/SAPO-11催化剂的异构化性能。确定最佳反应条件：在温度为340 ℃、压力为3 MPa、空速为1 h-1和氢油比为1000：1时,正十八烷转化率可达73.1%,煤气比为1.44,异构率为64.2%。     

碱对AlMCM-41合成和催化性能的影响

用无机碱NaOH和有机碱TEAOH合成了不同硅铝比的AlMCM-41介孔分子筛,通过XRD、SEM、TEM、TPDA、吡啶吸附IR和N2等温吸附进行了表征.研究表明,使用TEAOH适合于合成低硅铝比AlMCM-41,而使用NaOH合成高硅铝比的AlMCM-41,所得产物的有序程度较高.由TEAOH合成AlMCM-41的比表面、孔径、总酸量和Brnsted酸量均略大于由NaOH合成的样品,而且对异丙苯裂解和苯与1-十二烯烷基化反应的活性前者也高于后者.     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Effect of the Method of Modification of Zeolite X on Selectivity of Catalytic Methylation of Toluene

Theoretical and Experimental Chemistry - The effect of the method of modification of catalysts based on zeolite X by cesium and magnesium cations (ion exchange and impregnation) on the selectivity...     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of tetrabenzoporphins of the basis of isoindoline

Chemistry of Heterocyclic Compounds -