Strong influences of cocatalyst on ethylene/propylene copolymerization with a MgCl2/SiO2/TiCl4/diester type Ziegler-Natta catalyst

Using triethylaluminum (TEA), triisobutylaluminum (TIBA) or TEA/TIBA mixtures of molar ratio 75/25, 50/50 and 25/75 as the cocatalyst, five different ethylene-propylene copolymer samples were synthesized by a MgCl₂/SiO₂/TiCl₄/diester type Ziegler-Natta catalyst in a slurry polymerization process. The synthesized copolymers are strongly heterogeneous in chain structure and were fractionated into part of nearly random copolymer and part of segmented copolymer. Both polymerization activity and copolymer structure were found to be markedly changed when the cocatalyst was changed from TEA to TEA/TIBA mixtures or pure TIBA. As the content of TEA in cocatalyst increases, yield of the random part of product increases and the yield of the crystalline segmented copolymer part decreases. There is also a decrease in ethylene content of the whole product with increasing TEA amount. Copolymerization behaviors of the TEA/TIBA mixture activated catalysis systems are not simple superposition of those activated by pure TEA and TIBA. When a 50/50 TEA/TIBA mixture was used as cocatalyst, the copolymerization activity became the highest, and yields of both the random copolymer part and the segmented copolymer part are close to the highest level. On the other hand, both parts of the copolymer produced with a 50/50 TEA/TIBA mixture are relatively more blocky than the products of TEA or TIBA systems, and difference in ethylene content between the random part and the segmented part was the smallest. The segmented copolymer part of three typical samples was further fractionated by temperature-gradient extraction fractionation into fractions of different ethylene content and sequence distribution. Changing TEA content in the cocatalyst exerted strong influences also on the fraction distribution of the segmented part of copolymer.     

Ni2P-NiS双助剂促进g-C3N4光催化产氢动力学

本文通过简单的一步水热法得到Ni₂P-NiS双助催化剂,之后采用溶剂蒸发法将Ni₂P-NiS与g-C₃N₄纳米片结合构建获得无贵金属的Ni₂P-NiS/g-C₃N₄异质结。研究结果表明,优化后的复合材料具有良好的光催化产氢活性,其产氢速率最高可到6892.7 μmol·g^-1·h^-1,分别为g-C₃N₄ (150 μmol·g^-1·h^-1)、15%NiS/g-C₃N₄ (914.5 μmol·g^-1·h^-1)和15%Ni₂P/g-C₃N₄ (1565.9 μmol·g^-1·h^-1)的46.1、7.5和4.4倍。这主要归因于Ni₂P-NiS相比Ni₂P和NiS单体具有更好的载流子转移能力,其与g-C₃N₄形成的肖特基势垒能有效促进光生载流子在二者界面上的分离,同时Ni₂P-NiS能进一步降低析氢过电势,进而显著增强了表面析氢反应动力学。本研究为开发稳定、高效的非贵金属产氢助剂提供了实验基础。     

空心NiCo2S4纳米球助催化剂担载ZnIn2S4纳米片用于可见光催化制氢

纳米片与空心球上之间的合理界面调控是开发高效太阳能制氢光催化剂的潜在策略。在各类光催化材料中,金属硫化物由于具有相对较窄的带隙和优越的可见光响应能力而被广泛研究。ZnIn₂S₄是一种层状的三元过渡金属半导体光催化剂,其带隙可控(约2.4 eV)。在众多金属硫化物光催化剂中,ZnIn₂S₄引起了广泛兴趣。然而,单纯的ZnIn₂S₄光催化活性仍然相对较差,主要是因为光生载流子的复合率较高、迁移速率较慢。在半导体光催化剂上负载助催化剂是提升光催化剂性能的一种有效方法,因为它不仅可以加速光生电子和空穴的分离,而且还可以降低质子还原反应的活化能。作为一种三元过渡金属硫化物,NiCo₂S₄表现出较高的导电性、较低的电负性、丰富的氧化还原特性以及优越的电催化活性。这些特性表明,NiCo₂S₄可以作为光催化制氢的助催化剂,以加速电荷分离和转移。此外,NiCo₂S₄和ZnIn₂S₄都属于三元尖晶石的晶体结构,这可能有助于构建具有紧密界面接触的NiCo₂S₄/ZnIn₂S₄复合物,从而提高光催化性能。本文中,将超薄ZnIn₂S₄纳米片原位生长到非贵金属助催化剂NiCo₂S₄空心球上,形成具有强耦合界面和可见光吸收的NiCo₂S₄@ZnIn₂S₄分级空心异质结构光催化剂。最优NiCo₂S₄@ZnIn₂S₄复合样品(NiCo₂S₄含量：ca. 3.1%)的析氢速率高达78 μmol·h^-1,约是纳米片组装ZnIn₂S₄光催化剂析氢速率的9倍、约是1% (w, 质量分数)Pt/ZnIn₂S₄样品析氢速率的3倍。此外,该复合光催化剂在反应中表现出良好的稳定性。荧光和电化学测试结果表明,NiCo₂S₄空心球是一种有效的助催化剂,可促进光生载流子的分离和传输,并降低析氢反应的活化能。最后,提出了NiCo₂S₄@ZnIn₂S₄光催化析氢的可能反应机理。在NiCo₂S₄@ZnIn₂S₄复合光催化剂中,具有高导电性的NiCo₂S₄助催化剂可快速接受ZnIn₂S₄上的光生电子,用以还原质子生成氢气,而电子牺牲剂TEOA捕获光生空穴,进而完成光催化氧化还原循环。该研究有望为基于纳米片为次级结构的分级空心异质结光催化剂的设计合成及其光催化制氢研究提供一定的指导。     

采用CO吸附原位红外光谱研究Pt/TiO_2光催化体系中助催化剂作用

采用CO作为探针分子,将原位透射红外光谱应用于研究助催化剂Pt在Pt/TiO2光催化体系中的作用.实验发现,光照条件下,CO的覆盖度及样品温度没有明显变化,CO在Pt/TiO2上的吸附峰红移11 cm–1,在Pt/Al2O3上的吸附峰没有位移,表明CO在Pt/TiO2上的红移来源于TiO2上的光生电子转移到Pt上,这解释了为什么加入Pt助催化剂可提高光催化产氢活性.     

铑催化剂的制备及其催化取代苯乙炔不对称聚合研究

以1,5-环辛二烯(cod)和2,5-降冰片二烯(nbd)为配体,合成了[Rh(cod)Cl]_2和[Rh(nbd)Cl]_2两种铑催化剂,利用红外吸收光谱、核磁共振对其进行测试表征,准确确定其结构,且[Rh(nbd)Cl]_2的收率高达79.4%。再用四种手性氨作为助催化剂和[Rh(cod)Cl]_2或[Rh(nbd)Cl]_2形成催化体系催化含十二烷基的取代苯乙炔单体(1)聚合,聚合物重均分子量最高达49.39万,按照螺旋选择聚合机理诱起了聚合物主链上的螺旋结构;此外,首次在无助催化剂的作用下,用[Rh(nbd)Cl]_2催化含有L-丙氨醚、L-缬氨醚、L-苯丙氨醚取代基的苯乙炔单体(2、3、4)进行不对称聚合,三种聚合物产率高且分子量大,通过自配位螺旋选择聚合诱起三大分子主链上的螺旋结构,所得聚合物Poly(2)、Poly(3)、Poly(4)的主链顺式构型所占百分比分别为70%、77%、77%,因此取得了比较理想的催化效果。     

金属-有机框架衍生的多功能光催化剂

在光催化过程中,光催化剂被太阳能激发产生光生电子和空穴,来实现环境净化或能量转换,是应对全球变暖和能源短缺的有效途径之一.然而,光催化技术面临的主要瓶颈问题是光生载流子的低分离效率和高反应能垒.而催化剂本身的特性对这一点起到了决定性的作用.因此,催化剂的合理设计和改性是提高光催化效率的关键.金属有机框架(MOFs)是一...     

Two bis-[1-(aryliminomethyleny)-2-oxy-naphthalen] nickel catalysts for the polymerization of methyl methacrylate

Two bis-(1-arylliminomethylenyl-2-oxy-naphthalen) nickel complexes (aryl = 2-methylphenyl, complex 1; aryl = 2,6-diisoproylphenyl, complex 2) were reacted with alkylaluminium in presence of equimolar PPh₃ and tested as catalysts in methyl methacrylate (MMA) polymerization. The two nickel catalysts can initiate polymerization of MMA with good to high activity, the highest activity reaching 1.1 × 10⁵ g PMMA/(mol Ni · h) by less bulky complex 1 at 0.8 mol/L of MMA, 400 of Al/Ni ratio and 0 °C. In addition, the structures of nickel complexes and polymerization conditions, such as monomer concentration, polymerization temperature and Al/Ni molar ratio on catalytic activity of polymerization have great influences on catalytic activity and product properties.     

大规模合成非贵金属磷化物/CdS复合光催化剂高效可见光催化产氢（英文）

目前,在可见光照射下光催化产氢是一条解决能源短缺的理想途径.该途径实现工业化的两个关键因素是得到低成本的光催化剂和高的产氢效率.非贵金属助催化剂代替贵金属可大大降低光催化剂的成本.通过简单的方法大规模合成并组装半导体和非贵金属助催化剂以形成复合光催化剂可进一步降低成本.本文采用大规模和低成本的共沉淀法合成了磷化物/CdS光催化剂,实现了光催化产氢.当负载CoP和Mo P助催化剂后,光催化产氢活性得到大幅度提高.其中CoP/CdS和Mo P/CdS的最佳产氢量分别为140和78μmol/h,并分别为CdS的7.0倍和4.0倍,分别为Pt/CdS的2.0倍和1.1倍.这说明磷化物CoP和Mo P是具有优良催化活性的低成本非贵金属助催化剂,可以代替贵金属助催化剂应用在光催化产H_2中.在制备磷化物/CdS时,先将两种磷化物反应原料分别在水热反应釜和马弗炉中煅烧合成前驱体,再分别在管式炉氮气和氢气氛围中进行磷化得到磷化物Mo P和CoP.然后,将得到的Mo P和CoP分别溶解在Cd(NO_3)_2·4H_2O溶液中,在搅拌状态下逐滴加入Na_2S溶液形成沉淀,即可得到复合物磷化物/CdS.CoP/CdS和Mo P/CdS的HRTEM观察显示,磷化物助催化剂与CdS半导体紧密结合,证明了共沉淀法制备助催化剂/半导体复合光催化剂的有效性.磷化物与CdS的紧密结合促进了光激发电子从CdS向磷化物转移,从而大大提高了光催化产氢活性.这项工作为低成本大规模制备光催化剂和光催化产H_2实现工业化提供了一条可行性思路.     

Effects of cocatalyst on structure distribution of propylene polymers catalyzed by rac-Me2Si(Ind)2ZrCl2/aluminoxane

Propylene polymerization and propylene/1-octene copolymerization were studied using rac-Me₂SiInd₂ZrCl₂(1)/MAO or rac-Me₂SiInd₂ZrCl₂/(MAO + TIBA) as catalyst (methyl aluminoxane, MAO; AliBu₃, TIBA). The structure distribution of the polymers was characterized by temperature gradient extraction fractionation or precipitation fractionation, as well as by DSC analysis of the thermal segregated samples. By comparing the structure distribution of polypropylene and propylene-1-octene copolymer synthesized by 1/MAO and 1/(MAO + TIBA), it is found that adding TIBA in the catalyst system increase the blockiness of the polymer chain, especially in the copolymerization system. It is assumed that, when iso-butyl is incorporated in the aluminoxane, ion pair of the active center and the aluminoxane counter ion may exist in different states that show different catalytic behaviors, resulting in the formation of polymers with block structure.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.