Semiconvergence analysis of the randomized row iterative method and its extended variants

The row iterative method is popular in solving the large‐scale ill‐posed problems due to its simplicity and efficiency. In this work we consider the randomized row iterative (RRI) method to tackle this issue. First, we present the semiconvergence analysis of RRI method for the overdetermined and inconsistent system, and derive upper bounds for the noise error propagation in the iteration vectors. To achieve a least squares solution, we then propose an extended version of the RRI (ERRI) method, which in fact can converge in expectation to the solution of the overdetermined or underdetermined, consistent or inconsistent systems. Finally, some numerical examples are given to demonstrate the convergence behaviors of the RRI and ERRI methods for these types of linear system.     

基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

Rational Design of Two-Dimensional Magnetic Chromium Borides Based on First-Principles Calculation

Two-dimensional(2D) magnetic materials have been experimentally recognized recently,however,the Curie temperatures(TC) of known 2D systems are quite low.Generally,magnetic systems can be seen as constituent magnetic elements providing spins and the non-magnetic elements providing frameworks to host the magnetic elements.Short bond lengths between the magnetic and non-magnetic elements would be beneficial for strong magnetic interactions and thus high TC.Based on this,we propose to combine the magnetic element Cr and the non-magnetic element boron to design novel 2D magnetic systems.Using our self-developed software package IM2 ODE,we design a series of chromium-boride based 2D magnetic materials.Nine stable magnetic systems are identified.Among them,we find that CrB4-Ⅰ,CrB4-Ⅱ and CrBs-Ⅰ with common structural units [CrB8] are ferromagnetic metals with estimated TC of 270 K,120 K and 110 K,respectively.On the other hand,five CrB3 phases with structural units [Cr2B12] are antiferromagnetic metals.Additionally,we also find one antiferromagnetic semiconductor CrB2-Ⅰ.Our work may open new directions for identifying 2D magnetic systems with high TC.     

Highly Stable Univalent Copper of a Cu@Al/SBA-15 Nanocomposite Catalyzes the Synthesis of Fluorescent Aminobenzotriazoles Derivatives

With the development of green chemistry, it is still a challenge to maintain the unstable valence state of the metal in heterogeneous catalysts and realize new catalytic synthesis methods. In this paper, it is reported that an univalent copper nanocomposite (Cu@Al/SBA-15) can efficiently catalyze the formation of novel amino-containing benzotriazoles with great fluorescence properties in a new synthetic strategy. Subsequently, its application is further verified by an acylation reaction to produce a series of novel benzotriazoles derivatives with high yield. It is worth noting that the Cu@Al/SBA-15 nanocomposites not only enable the reaction completed with high yield in a short time, but can also be recycled many times without a significant reduction in activity, and the leaching of copper and aluminum species in reaction system is negligible. Finally, the detailed and feasible reaction mechanism is also provided.     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

n型IBC太阳电池选择性发射极工艺研究

为提升n型叉指背接触(IBC)太阳电池的光电转换效率,采用丝网印刷硼浆和高温扩散的方式形成选择性发射极结构,研究了硼扩散和硼浆印刷工艺对电池发射极钝化性能和接触性能的影响。实验结果表明,在硼扩散沉积时间和退火时间一定的条件下,硼扩散通源(BBr₃)流量为100 mL/min,沉积温度为830 ℃,退火温度为920 ℃时,发射极轻掺杂(p⁺)区域的隐开路电压达到710 mV,暗饱和电流密度为12.2 fA/cm²。发射极局部印刷硼浆湿重为220 mg时,经过高温硼扩散退火,重掺杂(p⁺⁺)区域的隐开路电压保持在683 mV左右,该区域方块电阻仅46 Ω/□,金属接触电阻为2.3 mΩ·cm². 采用该工艺方案制备的IBC电池最高光电转换效率达到24.40%,平均光电转换效率达到24.32%,相比现有IBC电池转换效率提升了0.28个百分点。     

全球海洋潜水旅游目的地分布特征及其自然影响因素研究

以全球海洋潜水旅游目的地为研究对象, 借助地理信息系统(GIS), 运用基尼系数、层次分析法(AHP)等方法, 研究全球海洋潜水旅游目的地的分布特征及其自然影响因素. 结果显示: (1)全球海洋潜水旅游目的地的分布数量由低纬向高纬递减; 洲际分布呈现高度集中, 主要聚集区是东亚与东南亚、地中海-红海以及加勒比海沿岸, 太平洋、印度洋与大西洋为散点分布. (2)影响海洋潜水旅游目的地的自然因素主要为海洋地形、海水温度、陆地气温、洋流、潮汐、海水能见度、珊瑚礁等, 相关因素影响程度与广度因海域呈现地域综合导控, 使得海洋潜水旅游目的地主要聚集在热带海域等地.     

Design and fabrication of GeAsSeS chalcogenide waveguides with thermal annealing

We reported a chalcogenide glass-based rib waveguide fabricated using photolithography and dry etching method. A commercial software(COMSOL Multiphysics) was used to optimize the waveguide structure and the distribution of the fundamental modes in the waveguide based on the complete vector finite component. We further employed thermal annealing to optimize the surface and sidewalls of the rib waveguides. It was found that the optimal annealing temperature for Ge As Se S films is 220℃, and the roughness of the films could be significantly reduced by annealing. The zero-dispersion wavelength(ZDW) could be shifted to a short wavelength around ~2.1 μm via waveguide structural optimization, which promotes supercontinuum generation with a short wavelength pump laser source. The insertion loss of the waveguides with cross-sectional areas of 4.0 μm×3.5 μm and 6.0 μm×3.5 μm was measured using lens fiber and the cut-back method. The propagation loss of the 220℃ annealed waveguides could be as low as 1.9 d B/cm at 1550 nm.     

On Hr(curl,Ω) estimates for a Maxwell type system in convex domains

In bounded convex domains, the regularity of a vector field u with its $\mathrm{div}\mathbf{u}$, $\mathrm{curl}\mathbf{u}$ in $L^r$ space and the tangential component or the normal component of u over the boundary in $L^r$ space, is established for $1<r<\infty$. As an application, we derive an $H^r(\mathrm{curl},\mathrm{\Omega })$ estimate for solutions to a Maxwell type system with an inhomogeneous boundary condition in convex domains. In contrast to the well-posed region of r in the space $H^r(\mathrm{curl},\mathrm{\Omega })$ for the Maxwell type system in Lipschitz domains given by Kar and Sini (2016) [16], we extend the well-posed region to be optimal.