Radiation-Induced Emulsion Copolymerization of Tetrafluorethylene with Propylene. The Behavior of the HF Formed

The radiation-induced emulsion copolymerization of tetrafluoroethylene with propylene was carried out at room temperature in the presence of gaseous monomers. The formation of hydrofluoric acid in the course of polymerization was observed. The amount of HF formed increased linearly with the irradiation time at various dose rates in the early stage. The tendency was similar to that of time-polymer yield curves. The rate of HF formation was proportional to the first order of the dose rate. The amount of HF formed increased in the presence of oxygen and decreased remarkably above 1 wt% emulsifier, while the polymer yield decreased in the presence of oxygen and increased with the emulsifier concentration. A remarkable decrease in the amount of HF formed in higher emulsifier concentration is mainly attributable to chemical absorption or electrostatic capture of H⁺ ion on polymer particles produced. Hydrofluoric acid is mainly formed by reaction between primary products (e _aq ^? and H) from the radiolysis of water and organic fluoride (tetrafluoroethylene and emulsifier), and is little formed by reaction between primary products and copolymer produced. The G value of HF formation was in the order of emulsifier-water system > suspension polymerization > emulsion polymerization, while the polymer yield was in the order of emulsion polymerization > suspension polymerization.     

Distribution patterns of gamma radiation dose rate in the high background radiation area of Odisha,India

Journal of Radioanalytical and Nuclear Chemistry - Absorbed dose rates in air for 20 residential areas in Odisha were measured using a vehicle-mounted NaI(Tl) scintillation spectrometer. The...     

Phase behavior of binary mixtures composed of ethylene carbonate and various organic solvents

Phase behaviors of the binary mixtures composed of ethylene carbonate (EC) and aliphatic alcohols, ω-phenyl alcohols, and alkylbenzenes were investigated. In addition, heat of solution of EC into these organic solvents was measured. The EC/methanol and EC/ethanol systems gave homogeneous solution at the temperature above their liquidus lines, while the mixtures of EC and alcohols with longer alkyl chain showed a miscibility gap in a liquid phase and provided the monotectic-type phase diagram. The liquid–liquid phase separation region expanded with the increase in the alkyl chain length. A similar phase behavior was also observed for the mixtures of EC and alkylbenzenes. On the other hand, the EC mixtures with ω-phenyl alcohols showed no miscibility gap in a liquid phase at least up to 4-phenylbutan-1-ol which has C4 alkyl chain intervening between phenyl and hydroxyl groups. This result demonstrates that both of the hydroxyl and phenyl groups act to facilitate the mixing of aliphatic compounds with EC. The phase behavior of these EC mixtures was analyzed applying the modified regular solution model in which the pair interaction energy was regarded as free energy. The model calculation with the use of heat of solution of EC at infinite dilution as the pair interaction enthalpy reproduced well both of the experimentally obtained liquidus line and mutual solubility curve as well as monotectic point.     

Radiation in a hypersonic shock layer generated around a projectile

Radiation emitted from the shock layer generated around a hypersonic flight model is experimentally investigated by using a ballistic range (two-stage light-gas gun). A polyethylene projectile of 1.2 cm in diameter is launched in this facility at the velocity of 5 km/sec (M=15), and the emission from the induced shock layer around the projectile is observed with a spectroscope. As a result, molecular band-spectra from NO and N₂ are detected along with those from carboncontaining molecules. Total emission power is measured with a diode-type powermeter. In addition, dimension effect of the flight model is theoretically and numerically examined, and a scaling law on thermochemical structure of the shock layer is developed. It shows that the thickness of thermal boundary-layer formed on the model surface does not follow the conventional scaling law based on the reaction distance and on the energy relaxation distance. Finally, the radiative field around the projectile is numerically computed, and the total power emitted from the shock layer is estimated. From the comparison between computed and measured results, the validity of the calculation model is discussed.     

Reverse current reduction of Ge photodiodes on Si without post-growth annealing

A new approach to reduce the reverse current of Ge pin photodiodes on Si is presented, in which an i-Si layer is inserted between Ge and top Si layers to reduce the electric field in the Ge layer. Without post- growth annealing, the reverse current density is reduced to -10 mA/cm^2 at -1 V, i.e., over one order of magnitude lower than that of the reference photodiode without i-Si layer. However, the responsivity of the photodiodes is not severely compromised. This lowered-reverse-current is explained by band-pinning at the i-Si/i-Ge interface. Barrier lowering mechanism induced by E-field is also discussed. The presented ＂non-thermal＂ approach to reduce reverse current should accelerate electronics-photonics convergence by using Oe on the Si complementary metal oxide semiconductor （CMOS） platform.     

Evaluation of influence of anisotropic diffusion near a wall in near-field fluorescence correlation spectroscopy of nanoparticles

Fluorescence correlation spectroscopy (FCS) of colloidal nanoparticles using a near-field fiber probe was numerically simulated. The near-wall dynamics was simulated by accounting for the anisotropic mobility of nanoparticles owing to hydrodynamic interaction with a wall (Stokes viscous force). By comparing the simulation results with theoretical model calculations, we found that the influence of anisotropic diffusion is insignificant in near-field FCS autocorrelation analysis.     

A regiocontrolled synthesis of substituted indoles by palladium-catalyzed coupling of 2-bromonitrobenzenes and 2-bromoacetanilides

The palladium-catalyzed cross-coupling reaction of 2-bromonitrobenzenes or 2-bromoacetanilides with ethylene has been used to produce a variety of substituted indoles. The mild reaction conditions and selectivity inherent in the coupling reaction have been utilized to produce regiochemically pure 4-, 5-, 6-, and 7-substituted indoles.