Thermodynamic properties of the N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide

This work is a continuation of our wide ranging investigation on quinolinium based ionic liquids (ILs). The study includes specific basic characterisation of the synthesized compounds N-octylquinolinium bromide, [OQuin][Br] and N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide [OQuin][NTf₂] by NMR spectra, elementary analysis and water content. Differential scanning calorimetry (DSC) measurements gave us properties of the pure [OQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at the glass transition. Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 10 binary mixtures composed of organic solvent dissolved in the IL: {[OQuin][NTf₂] + aromatic hydrocarbon (benzene, or thiophene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol, or 1-dodecanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (250 to 370) K. For mixtures with benzene and alkylbenzenes, the immiscibility gap in the liquid phase in a low mole fraction of the IL was observed with upper critical solution temperature (UCST) higher than the boiling point of the solvent. In the system with thiophene, the immiscibility gap is lower and UCST was measured. For binary mixtures with alcohols, complete miscibility in the liquid phase was observed for 1-butanol and 1-hexanol. In the systems with longer chain alcohols, the immiscibility gap with UCST was noted. Typical behaviour for ILs was observed with an increase of the chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Thermodynamic properties of the N-butylisoquinolinium bis(trifluoromethylsulfonyl)imide

A new isoquinolinium ionic liquid (IL) has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterization of synthesized compounds: N-isobutylquinolinium bromide, [BiQuin][Br] and N-isobutylquinolinium bis{(trifluoromethyl)sulfonyl}imide [BiQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [BiQuin][NTf₂], i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at glass transition have been measured using a differential scanning microcalorimetry technique (DSC). Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 8 binary mixtures composed of organic solvent dissolved in the IL: {[BiQuin][NTf₂] + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fraction and temperature from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with an immiscibility gap in the liquid phase existing at low mole fraction of the IL with a very high upper critical solution temperature (UCST). For mixtures with alcohols, complete miscibility was observed for 1-butanol and also an immiscibility gap with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed that with increasing chain length of an alcohol, the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Some Aspects of Ionic Liquids as Diverse and Versatile Sustainable Solvents

In this mini review several particular cases of ionic liquid solution behavior are discussed, namely solutions of ionic liquids with aliphatic alcohols, polyalcohols, arenes, chloromethanes and poly(ethyleneglycol) as well as salting-out and salting-in effects. The presented cases clearly expose ionic liquids as being diverse and versatile sustainable solvents that exhibit flexible phase behavior and, consequently, variable phase diagrams. These can be tuned either by changing the length of the alkyl chain(s) of the ionic liquid??s cation (and/or sometimes the anion), or by introducing a different aliphatic nature to the other solution constituent (e.g., by varying polymer chain length or the number of carbon atoms in chloromethanes). Sometimes, the evolution of the phase diagrams is fine and continuous, showing several consecutive stages, revealing both qualitative and quantitative changes. Finally, the diversity and versatility of ionic liquids are viewed as important features that contribute to their efficiency as tunable solvents or salting media.     

Massenspektrometrische Untersuchung von Bromiden: Über den Einfluss der Radikalstabilität auf die Ringgrösse Cyclischer Bromonium-Ionen

The existence of 5- or 6-membered cyclic bromonium ions, produced from ω-phenyl alkyl bromides under electron-impact conditions, is decisively dependent upon the stability of the phenyl alkyl radicals.     

Alkane/Alcohol mixed monolayers at the solid/liquid interface

In this work, we present the behavior of solid monolayers of binary mixtures of alkanes and alcohols adsorbed on the surface of graphite from their liquid mixtures. We demonstrate that solid monolayers form for all the combinations investigated here. Differential scanning calorimetry (DSC) is used to identify the surface phase behavior of these mixtures, and elastic neutron incoherent scattering has been used to determine the composition of the mixed monolayers inferred by the calorimetry. The mixing behavior of the alcohol/alkane monolayer mixtures is compared quantitatively with alkane/alkane and alcohol/alcohol mixtures using a regular solution approach to model the incomplete mixing in the solid monolayer with preferential adsorption determining the surface composition. This analysis indicates the preferential adsorption of alcohols over alkanes of comparable alkyl chain length and even preferential adsorption of shorter alcohols over longer alkanes, which contrasts strongly with mixtures of alkane/alkane and alcohol/alcohol of different alkyl chain lengths where the longer homologue is always found to preferentially adsorb over the shorter. The alcohol/alkane mixtures are all found to phase separate to a significant extent in the adsorbed layer mixtures even when molecules are of a similar size. Again, this contrasts strongly with alkane/alkane and alcohol/alcohol mixtures where, although phase separation is found for molecules of significantly different size, good mixing is found for similar size species.     

Thermophysical properties and phase equilibria study of the binary systems {N-hexylquinolinium bis(trifluoromethylsulfonyl)imide + aromatic hydrocarbons,or an alcohol}

The new quinolinium ionic liquid has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterisation of synthesized compounds: N-hexylquinolinium bromide, [HQuin][Br] and N-hexylquinolinium bis{(trifluoromethyl)sulfonyl}imide [HQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [HQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity have been measured using a differential scanning microcalorimetry technique (DSC) and thermal analysis instrument (TA). Densities and viscosities were determined as a function of temperature. Phase equilibria for the binary systems: {[HQuin][NTf₂]) + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with immiscibility gap in the liquid phase beginning from (0.13 to 0.28) mole fraction of the IL with very high an upper critical solution temperature (UCST). For mixtures with alcohols, the complete miscibility was observed for 1-butanol and immiscibility with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed, that with increasing chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibria data sets. For the systems containing immiscibility gaps, (IL + an alcohol) parameters of the LLE correlation were used to the prediction of SLE.     

Phase behavior of polyion-surfactant ion complex salts: effects of surfactant chain length and polyion length

The aqueous phase behavior of a series of complex salts, containing cationic surfactants with polymeric counterions, has been investigated by visual inspection and small-angle X-ray scattering (SAXS). The salts were alkyltrimethylammonium polyacrylates, CxTAPAy, based on all combinations of five surfactant chain lengths (C6, C8, C10, C12, and C16) and two lengths of the polyacrylate chain (30 and 6 000 repeating units). At low water contents, all complex salts except C6TAPA6000 formed hexagonal and/or cubic Pm3n phases, with the hexagonal phase being favored by lower water contents. The aggregate dimensions in the liquid crystalline phases changed with the surfactant chain length. The determined micellar aggregation numbers of the cubic phases indicated that the micelles were only slightly aspherical. At high water contents, the C6TAPAy salts were miscible with water, whereas the other complex salts featured wide miscibility gaps with a concentrated phase in equilibrium with a (sometimes very) dilute aqueous solution. Thus, the attraction between oppositely charged surfactant aggregates and polyions decreases with decreasing surfactant chain length, and with decreasing polyion length, resulting in an increased miscibility with water. The complex salt with the longest surfactant chains and polyions gave the widest miscibility gap, with a concentrated hexagonal phase in equilibrium with almost pure water. A decrease in the attraction led to cubic-micellar and micellar-micellar coexistence in the miscibility gap and to an increasing concentration of the complex salt in the dilute phase. For each polyion length, the mixtures for the various surfactant chain lengths were found to conform to a global phase diagram, where the surfactant chain length played the role of an interaction parameter.     

Catalytic C(1), C(2)-Bond Cleavage of Long-Chain Aliphatic Alcohols and ω-Phenylalkyl Alcohols

A catalytic one step procedure for the C(1), C(2)-bond cleavage of long-chain aliphatic alcohols and ω-phenyl alcohols has been investigated, using as examples decanol, dodecanol, hexadecanol, benzyl alcohol, 2-phenylethanol and 3-phenyl-propanol. The reactions, which were carried out in a continuous flow tubular reactor using a Ni/Cu catalyst, showed good activity and selectivity with respect to the cleavage products. On the basis of the experimental studies a reaction scheme for the heterogeneous catalytic C(1), C(2)-bond cleavage of the alcohols is suggested.     

An NMR self-diffusion investigation of water/xylene/alkyl amine solutions

Extensions of the solution phases have been determined and the self-diffusion behaviour investigated in ternary systems containing water/xylene/primary alkyl amine, where the chain length of the amine varied between C₆ and C₁₀. The phase diagrams at 25°C are dominated by a solution phase and a rather large water/xylene miscibility gap which increases slightly in size with increasing chain length of the amine. A lamellar liquid crystalline phase was found in all binary amine/water systems at 25°C, except for hexylamine where the lamellar phase melts below this temperature. The self-diffusion coefficients of all components decrease in a similar way when water is added to a xylene/amine solution. The self-diffusion is rapid and of similar magnitude for all components, which shows that no well-defined inverse aggregates are formed. The data are discussed in terms of hydrogen bonding between the different species in the solution.     

烷基-α-D-吡喃葡萄糖苷的合成与性能

以D-葡萄糖为原料,经全乙酰化、在SnCl_4催化下与脂肪醇糖苷化、脱保护3步反应合成了7种不同碳链长度的烷基-α-D-吡喃葡萄糖苷。利用核磁共振、表面张力仪和偏光显微镜等对其进行结构、表面张力和热致液晶等性能测试,结果表明,当烷基-α-D-吡喃葡萄糖苷烷基链长(n)为6~9时,均有发泡和乳化性能,其中正壬基-α-D-吡喃葡萄糖苷具有最佳的发泡和乳化性能;烷基糖苷(n=6~9)的表面张力(γ_(CMC))及临界胶束浓度(CMC)均比较低;饱和吸附量(Γ_(max))随烷基链的增长而减小,饱和吸附面积(A_(min))随烷基链增长而增大;形成胶束时的标准自由能(ΔG_(mic))和吸附自由能(ΔG_(ads))均为负值,其绝对值随烷基链增长而越来越大,其中正辛基-α-D-吡喃葡萄糖苷的表面活性最好;烷基糖苷(n=4~9)对皮肤均无急性刺激作用;所合成的烷基糖苷均具有热致液晶行为,随烷基链长的增加,液晶相的温度范围变宽,液晶相的稳定性越好。     

Odd-even effect in miscibility of main-chain liquid crystal polymers with low molar mass nematogens

Qualitative phase diagrams were constructed using the contact method for binary mixtures of several chemically-distinct low molar mass nematogens (LMMN) with a main chain liquid crystal polymer (TPB-x) which has a mesogenic group, 1-(4-hydroxy-4'-biphenyl)-2-(4-hydroxy phenyl) butane, separated by flexible alkyl spacers of variable length, x. Several interesting effects were observed. TPB-x was found to exhibit an odd-even variation in miscibility in the nematic state (2n + 1 = miscible, 2n=immiscible) with 4'-pentyl-4-cyanobiphenyl (5CB), but not with 4'-pentyloxy-4-cyanobiphenyl (5OCB) in which most polymers were completely miscible. On prolonged isothermal annealing in the biphasic region in 5CB, TPB-2n exhibited spherulitic crystallization of the liquid crystal polymer. These observations are shown to be qualitatively consistent with a modification of the Flory-Huggins theory by Brochard et al.     

Solubility of phosphonium ionic liquid in alcohols, benzene, and alkylbenzenes

The (solid + liquid) phase equilibria and (liquid + liquid) phase equilibria of binary mixtures containing quaternary phosphonium salt-tetrabutylphosphonium methanesulfonate and alcohols or alkylbenzenes were investigated. The systems {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + 1-butanol, or 1-hexanol, 1-octanol, 1-decanol, or 1-dodecanol} and {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + benzene, or toluene, ethylbenzene, or propylbenzene} have been measured by a dynamic method at a wide range of temperatures from 220 to 386 K. Solid-liquid equilibria with immiscibility in the liquid phase were detected with the aromatic hydrocarbons ethylbenzene and propylbenzene. The basic thermodynamic properties of pure ionic liquid--the melting point, enthalpy of fusion, enthalpy of solid-solid-phase transition, and glass transition--have been determined by differential scanning calorimetry. The experimental data of systems with alcohols were correlated by means of the UNIQUAC ASM and NRTL1 equations and of systems with alkylbenzenes with Wilson and NRTL equations utilizing parameters derived from the (solid + liquid) equilibrium. The root-mean-square deviations of the solubility temperatures for all calculated data are dependent upon the particular system and the particular equation used.     

Isotope effects on miscibility of 1-butyl-3-methylimidazolium tetrafluoroborate with butanols

The liquid-liquid miscibility temperatures as a function of composition and deuterium substitution have been experimentally determined for the binary mixtures of 1-butyl-3-methylimidazolium tetrafluroborate with 1-butanol, isobutyl alcohol, 2-butanol, and tert-butyl alcohol and their deuterated forms (OH/OD substitution). All systems exhibit upper critical solution temperatures (UCSTs) with a visible effect of branching in alcohols. Deuteration of alcohols in the hydroxyl group results in a decrease of the UCST of the given system and the largest shift is observed for tert-butyl alcohol. These solvent isotope effects nicely correlate with the polarity expressed by dielectric constants or E(T)(30) parameters of alcohols. The effect of the isotope substitution on the miscibility of ILs with butanols can be rationalized by using the statistical-mechanical theory of the isotope effects coupled with a phenomenological g(E) model. Following this procedure one finds that the isotope shift of UCST is associated mainly with the zero-point energy contribution.     

Nanostructure changes in protic ionic liquids (PILs) through adding solutes and mixing PILs

The effect of adding primary n-alcohols with aliphatic chains and hexane on the nanostructure of a series of 14 protic ionic liquids (PILs) was explored using small and wide angle X-ray scattering (SAXS and WAXS). PILs were investigated with primary, secondary and tertiary ammonium cations containing different alkyl chain lengths, with and without hydroxyl substitution of the alkyl chain. Formate or nitrate anions were paired with these cations. The PILs which had no identified intermediate range order between 5-16 ? had very low solubilities of the solutes. The other PILs, which had non-polar domains present, were mostly miscible with the primary alcohols of ethanol, propanol and butanol. When the alkyl chain length of the alcohols was similar to the PILs then the alcohols co-partitioned with the alkylammonium cation components of the PILs and caused either an increase or decrease in the size of the non-polar domains, depending on whether the alcohol chain length was longer or shorter than that of the cation in the PIL respectively. For ethylammonium nitrate (EAN) with propanol or butanol and propylammonium nitrate (PAN) with butanol, the difference between the alcohol chain length and the alkyl chain length was too great to lead to a modified nanostructure, and instead large aggregates were present. The solubility of hexane in the alkylammonium nitrate PILs had a very strong correlation to the alkyl chain length. The addition of hexane had very little effect on the non-polar domain sizes, which was attributed to it not being orientated in alignment with the alkylammonium cations in the non-polar domains. Lastly, seven binary PIL-PIL solution series were investigated using SAXS and WAXS to show how the nanostructure of these systems can be fine tuned to control the size and structure of the non-polar domains.     

Phase equilibria study in binary systems (tetra-n-butylphosphonium tosylate ionic liquid + 1-alcohol, or benzene, or n-alkylbenzene)

Ambient pressure (solid + liquid) equilibria (SLE) and (liquid + liquid) equilibria (LLE) of binary systems--ionic liquid (IL) tetra- n-butylphosphonium p-toluenesulfonate + 1-alcohol (1-butanol, 1-hexanol, 1-octanol, 1-decanol, or 1-dodecanol), benzene, or n-alkylbenzene (toluene, ethylbenzene, n-propylbenzene)-have been determined by using dynamic method in a broad range of mole fractions and temperatures from 250 to 335 K. For binaries containing alcohol, simple eutectic diagrams were observed with complete miscibility in the liquid phase. Only in the case of system [IL + n-propylbenzene] was mutual immiscibility with an upper critical solution temperature (UCST) with low solubility of the IL in the alcohol and high solubility of the alcohol in the IL detected. The basic thermal properties of pure IL, i.e., melting and glass-transition temperatures as well as enthalpy of melting, have been measured with differential scanning microcalorimetry technique (DSC). Well-known UNIQUAC, Wilson, NRTL, NRTL1, and NRTL2 equations have been fitted to obtain experimental data sets. For the system containing immiscibility gap [IL + n-propylbenzene], parameters of the equations have been derived only from SLE data. As a measure of goodness of correlations, root-mean square deviations of temperature have been used. These experimental results were compared to the previously measured binary systems with tetra- n-butylphosphonium methanesulfonate. Changing anion from methanesulfonate to p-toluenesulfonate decreases solubilities in systems with alcohols and increases the solubilities in binary systems with benzene and alkylbenzenes.     

共聚高分子混合物的分子热力学模型

以硬球链流体的分子热力学模型为基础 ,引入方阱位能相互作用的贡献 ,建立了共聚高分子混合物的分子热力学模型 .模型中具有物理意义的链节参数 (链节数、链节直径和链节间的相互作用能 )由纯物质的pVT关系拟合得到 ,而用来校正交叉作用能和交叉碰撞直径的可调参数需由液液平衡的实验数据回归得到 .采用了相对简单的处理方法来确定这些可调参数 .对所选共聚高分子混合物的共存曲线、互溶窗和互溶图等相行为的关联结果令人满意 .     

Polymer blends containing liquid crystal polymers

Polymer blends can be either composed of mixtures of flexible components, of a stiff chain and a flexible macromolecule, or of two stiff-chain polymers. All three cases may be dealt with in terms of the Flory lattice model. Special attention is paid to the influence of liquid crystalline order on the miscibility of the two polymers. For isotropic mixtures all three cases may be described in terms of the usual Flory–Huggins approximation. If a nematic phase is formed the miscibility of blends of rigid rods with flexible macromolecules (molecular composites) is strongly reduced because of entropic reasons. Highly ordered mixture of two stiff-chain polymers in melt can be described in terms of the regular solution theory leading to the same miscibility criterion as is valid for two flexible polymers. All deductions are compared to recent experimental work.     

Reaction gas chromatography/mass spectrometry. 2—the use of catalytic on-line dehydrogenation for the investigation of alcohols by gas chromatography/mass spectrometry

A method for structure determination of aliphatic alcohols within mixtures is described. It involves the use of a vapour phase dehydrogenation micro-reactor (Cu, 300°C) located between the chromatographic column and the mass spectrometer or between the injection port and the column. Since primary and secondary alcohols are converted into corresponding carbonyl compounds, they can be readily differentiated from tertiary alcohols and dialkyl ethers. An examination of the mass spectra of alcohols and carbonyl compounds permits the determination of molecular mass, the location of hydroxyl group and the determination of branching at the β-carbon atom.     

Aliphatic dipeptide tags for multi-2-plex protein quantification

Mass-balanced (1)H/(2)H-isotope dipeptide tag (MBIT) is diversified as aliphatic tags for multiplexed protein quantification. Aliphatic MBITs are based on the N-acetyl-Xxx-Ala dipeptide, where Xxx is an artificial amino acid with a linear alkyl side chain from C(2)H(5) to C(8)H(17) (C(2)-C(8) tags). (1)H/(2)H isotopes are encoded in the methyl groups of N-acetyl and Ala to yield a pair of isobaric tags with 2-plex quantitation signals separated by 3 Da. C(2)-C(5) tags are prepared by solid-phase synthesis, while C(6)-C(8) tags are synthesized by olefin metathesis in solution. These aliphatic tags are made reactive toward the primary amines of peptides, and the relative abundances of quantitation signals are characterized using both matrix-assisted laser desorption ionization and electrospray ionization tandem mass spectrometry. MBIT-linked peptides co-migrate in reverse-phase liquid chromatography (LC), and their tandem mass spectra exhibit 2-plex quantitation signals as well as sequence ions in similar abundances. As the length of alkyl side chain increases, C(2)-C(8) tags show a stepwise increase in both the LC retention time and the relative abundance of quantitation signals. In addition, the quantitation linearity is well-maintained in a 15-250 fmol range. The multiplexing capability of aliphatic MBITs is demonstrated by applying three different tags (C(6)-C(8) tags) to the quantification of yeast heat shock proteins expressed under four different physiological conditions.     

Physico-chemical properties and phase behaviour of piperidinium-based ionic liquids

The sufficient review of the existing literature of the 1-alkyl-1-methylppiperidinium-based ionic liquids has been presented. The phase diagrams for the binary systems of {1-butyl-1-methylpiperidinium thiocyanate [BMPIP][SCN] + an alcohol (1-hexanol, 1-heptanol, 1-octanol, 1-nonanol, 1-decanol, 1-dodecanol), or + water, or + aliphatic hydrocarbons (n-hexane, n-heptane, n-octane), or + cyclohexane, or, + cycloheptane, or + aromatic hydrocarbons (benzene, toluene, ethylbenzene)} and for the binary systems of {1-ethyl-1-methylpiperidinium bis{(trifluoromethyl)sulfonyl}imide [EMPIP][NTf₂] + an alcohol (ethanol, 1-propanol, 1-butanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol), or + water} have been determined at atmospheric pressure using a dynamic method. The influence of an alcohol chain length was discussed for these ionic liquids. A systematic decrease in the solubility was observed with an increase of the alkyl chain length of an alcohol. (Solid + liquid) phase equilibria with complete miscibility in the liquid phase region were observed for the systems involving water and the alcohols for the thiocyanate-based ionic liquid. Opposite, the bis{(trifluoromethyl)sulfonyl}imide-based ionic liquid reveal the immiscibility gap in the liquid phase. The correlation of the experimental data has been carried out using the NRTL equation. The phase diagrams reported here have been compared to the systems published earlier with the 1-alkyl-1-methylpiperidinium-based ionic liquids. The influence of the cation and anion on the phase behaviour has been discussed. The basic thermal properties of pure ILs, i.e. melting temperature and the enthalpy of fusion, the solid-solid phase transition temperature and enthalpy have been measured using a differential scanning microcalorimetry technique.