二部组合加权网络的同步能力分析

研究了多层二部组合加权网络同步能力,首先根据主稳定函数模型(MSF)得到网络的超拉普拉斯矩阵并在同步域有界和无界两种情况下推导出反映网络同步能力的两个重要指标;其次在所得指标的基础上分析了同步能力与层数、路的节点数、完全二部图节点数、层间耦合强度和层内耦合强度之间的关系,为提高网络同步能力提供了理论依据;最后使用MATLAB软件进行了仿真图像实验,验证了理论结果的有效性.     

Superconducting membrane mechanical oscillator based on vacuum-gap capacitor

Using the diluted S1813 UV photoresist as a sacrificial layer, we successfully fabricate a superconducting suspended parallel-plate capacitor, in which the top layer of aluminum film acts as a membrane mechanical resonator. Together with a superconducting octagonal spiral inductor, this parallel-plate capacitor constitutes a superconducting microwave resonator. At m K temperature, the transmission characteristic and spectrum of the microwave resonator are measured.Sideband frequencies caused by the vibration of the membrane mechanical resonator are clearly demonstrated. By downconverting with a mixer, the dependence of fundamental frequency and its harmonics on the input microwave power are clearly demonstrated, which is consistent with the numerical simulation.     

磁通量子比特qubit信号强度随势垒偏置电压的变化

在20mK极低温下,测量了超导磁通量子比特的环流方向,并测到量子比特(qubit)信号.通过改变磁通量子比特的势垒高度,得到qubit信号强度随势垒高度的变化的实验数据并建立理论模型解释了实验现象.     

粘土担载的钼基催化剂的制备、结构及CO加氢合成醇性能

采用溶胶凝胶法与等体积浸渍相结合制备了一系列以粘土为载体的K-Co-Mo催化剂. 采用XRD、N₂等温吸脱附、H_{26+的还原,但对Mo⁴⁺和Co²⁺的还原没有明显的影响. 催化剂经还原后,在其表面生成了一种更低价态的Mo^δ+(1<δ<4)物种,被认为是合成醇的活性中心. 与非负载催化剂相比,粘土担载的K-Co-Mo具有更高的合成醇性能. 负载型催化剂具有较高的活性物种分散度,并且其介孔结构在一定程度上延长了合成醇反应中间体的滞留时间,从而促进了低碳醇的生成. 经773 K还原的催化剂具有较高的活性,其原因可为催化剂表面具有较高含量的Mo^δ+物种.}     

也谈中学生自学能力的培养

利用自编学案诱导学生分步自学,培养学生的自学习惯;加强学生阅读能力的培养,结合物理学科知识的联系,让学生比较、归纳,促使学生掌握自学方法;强化信息题的训练,培养信息处理能力,实现自学能力的有效提升.     

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well vertical-cavity surface-emitting laser

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well (QW) vertical-cavity surface-emitting laser (VCSEL) based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm². The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed operation. While under continuous-wave (CW) operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12℃ to 96℃ and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.     

Theoretical simulation and analysis of large size BMP-LSC by 3D Monte Carlo ray tracing model

Luminescent solar concentrators(LSC) can reduce the area of solar cells by collecting light from a large area and concentrating the captured light onto relatively small area photovoltaic(PV) cells, and thereby reducing the cost of PV electricity generation. LSCs with bottom-facing cells(BMP-LSC) can collect both direct light and indirect light, so further improving the efficiency of the PV cells. However, it is hard to analyze the effect of each parameter by experiment because there are too many parameters involved in the BMP-LSC. In this paper, all the physical processes of the light transmission and collection in the BMP-LSC were analyzed. A three-dimensional Monte Carlo ray tracing program was developed to study the transmission of photons in the LSC. A larger-size LSC was simulated, and the effects of dye concentration, the LSC thickness, the cell area, and the cell distance were systematically analyzed.     

基于悬空电容的机械振子的制备和表征

微机械振子在信息处理的研究领域有着重要的应用,我们采用超导材料铝制备了悬空电容,该悬空电容的上极板构成了微机械振子.悬空电容和螺旋电感一起构成LC振荡电路.微波通过平面波导传输线耦合进来,在LC电路中形成电磁振荡,同时,激励出薄膜机械振子的机械振动.本文详细介绍了采用稀释的光刻胶作牺牲层来制备悬空结构的方法,并通过测试,研究了悬空电容中的薄膜振动特性,为今后机械振子与微波场、光场甚至量子比特的相互耦合等研究工作提供了重要参考.     

臭氧修饰(001)晶面TiO2纳米片及其光催化降解甲苯研究

本文系统研究了臭氧修饰对(001)主导晶面锐钛矿型TiO₂光催化剂降解甲苯性能的影响. 利用自行搭建的光催化VOCs降解装置对催化剂光降解甲苯的性能进行了测试. 通过多种表征手段,结合原位DRIFTS和DFT计算研究了臭氧表面修饰及甲苯吸附和降解机理. 结果表明,用臭氧进行表面修饰可以显著提高(001)主导晶面TiO₂光催化降解甲苯的性能. (001)晶面上丰富的5c-Ti不饱和配位是臭氧分子的吸附位点,其解离后形成的Ti-O键与H₂O分子结合,在表面生成大量孤立的Ti_5c-OH. Ti_5c-OH 是甲苯分子的吸附位,它的形成显著提高了对甲苯分子的吸附能力. 在光照下Ti_5c-OH与光生空穴结合能形成·OH自由基. 通过臭氧解离产生的O₂也可以与光生电子结合形成超氧自由基. 这些具有强氧化性活性自由基的形成促进了对气相甲苯的光催化降解速率.     

分离扇回旋加速器磁通道的复测安装

由于空间狭小且不能通视,分离扇回旋加速器的检修与准直复位一直困扰着机械准直人员。加上时间紧张,如何快速准确找到故障原因和准确复位是保证加速器正常运行所必须思考的问题。分析了磁通道的工作原理和传动机制,建立了有效的传动监测模型,标定并改善了电机的传动性能。基于多重坐标系转换总结出一种快速安装的方法,快速复位精度满足物理要求,保证束流的顺利引出。该方法精度满足实验要求(不超过0.2 mm),具有可继承性,能够为相关加速器类似元器件的检修与准直工作提供依据。