含有1,4,7-三苄基-1,4,7-三氮杂环壬烷的两个双核铜配合物的合成、表征及其与DNA的相互作用

合成了2个含有1,4,7-三苄基-1,4,7-三氮杂环壬烷（Bn₃tacn）的双核铜配合物：[Cu₂（Bn₃tacn）₂（m-bdc）（CH₃CN）₃（H₂O）₂]ClO₄（1）和[Cu₂（Bn₃tacn）₂（OH）₂]（ClO₄）₂（2）。配合物1由间苯二甲酸采取单双齿方式桥连Cu（Ⅱ）离子,配合物2由OH桥连。配合物1和2晶体均属于单斜晶系,分别为P2₁/c空间群和C2/c空间群。分别对2个配合物进行了红外光谱、紫外-可见光谱和元素分析表征。研究了配合物1与DNA的相互作用,对配合物2进行了循环伏安测试。     

Fe2O3/CNT催化湿法H2O2氧化苯酚

通过化学沉积法和热处理得到多壁碳纳米管负载Fe2O3催化剂 Fe2O3/CNT, Fe2O3的负载质量分数约为15.1%,XRD表征显示,负载的Fe2O3存在α和γ这2种晶型。考察了Fe2O3/CNT催化湿式H2O2氧化去除废水中苯酚催化性能,通过苯酚的去除率及反应过程中催化剂活性组分的溶出总量,研究了催化剂制备过程中添加聚乙烯醇对催化剂性能的影响。在苯酚和H2O2初始浓度分别为350和1 500 mg/L、催化剂投加量为1.0 g/L、温度80 ℃条件下,经过240 min的反应,苯酚去除率达100％,COD去除率为86.1％。     

铁电存储器中高能质子引发的单粒子功能中断效应实验研究

利用中国原子能科学研究院的中高能质子实验平台,针对两款商用铁电存储器开展了中高能质子单粒子效应实验研究,发现其中一款器件在质子辐照下发生了单粒子翻转和单粒子功能中断.本文主要针对单粒子功能中断效应展开了后续实验研究.首先通过改变质子能量对器件进行辐照,发现单粒子功能中断截面随质子能量的提高而增加.为进一步研究器件发生单粒子功能中断的机理,利用激光微束平台开展了辅助实验,对铁电存储器的单粒子功能中断效应的敏感区域进行了定位,最后发现铁电存储器单粒子功能中断是由器件外围电路发生的微锁定导致的.     

Multi-scale computation methods: Their applications in lithium-ion battery research and development

Based upon advances in theoretical algorithms, modeling and simulations, and computer technologies, the rational design of materials, cells, devices, and packs in the field of lithium-ion batteries is being realized incrementally and will at some point trigger a paradigm revolution by combining calculations and experiments linked by a big shared database,enabling accelerated development of the whole industrial chain. Theory and multi-scale modeling and simulation, as supplements to experimental efforts, can help greatly to close some of the current experimental and technological gaps,as well as predict path-independent properties and help to fundamentally understand path-independent performance in multiple spatial and temporal scales.     

百万吨级乙烯压缩机加气流动特性研究

级间加气是乙烯工业节能增产的重要手段,特别是百万吨乙烯压缩机加气量高达8倍于上游通流流量,对下游叶轮气动匹配及整机性能影响巨大.目前关于压缩机加气特性及与通流相互影响的研究鲜有报道.本文基于计算流体动力学方法,建立了通流部件与径向加气室内部流动的耦合模型,并以百万吨乙烯压缩机为研究对象,通过分析上一级通流特性、通流-加...     

PS-b-P (DMS-stat-VMS)嵌段聚合物的制备及性能

采用活性阴离子聚合方法,以仲丁基锂为引发剂,以苯乙烯、六甲基环三硅氧烷（D3）和2,4,6-三乙烯基-2,4,6-三甲基环三硅氧烷（V3）为反应单体,分步聚合制备了聚苯乙烯-b-聚（二甲基硅氧烷-stat-乙烯基甲基硅氧烷）[PS-b-P（DMS-stat-VMS）]嵌段聚合物.采用傅里叶变换红外光谱、氢核磁共振谱及凝胶渗透色谱对共聚物的化学结构、分子量及分子量分布进行了表征,并通过扫描电子显微镜、原子力显微镜及接触角等测试方法研究了共聚物各链段组分对共聚物形貌及表面亲疏水/油性的影响.结果表明,所制备的共聚物分子量分布较窄,由于各组分性能的差异而呈现出微相分离结构,同时该共聚物保留了PS-b-PDMS原有的表面性质,为设计结构多样性及性能优异的聚硅氧烷共聚物提供了新思路.     

Sensitivity of heavy-ion-induced single event burnout in SiC MOSFET

The energy deposition and electrothermal behavior of SiC metal-oxide-semiconductor field-effect transistor(MOSFET)under heavy ion radiation are investigated based on Monte Carlo method and TCAD numerical simulation.The Monte Carlo simulation results show that the density of heavy ion-induced energy deposition is the largest in the center of the heavy ion track.The time for energy deposition in SiC is on the order of picoseconds.The TCAD is used to simulate the single event burnout(SEB)sensitivity of SiC MOSFET at four representative incident positions and four incident depths.When heavy ions strike vertically from SiC MOSFET source electrode,the SiC MOSFET has the shortest SEB time and the lowest SEB voltage with respect to direct strike from the epitaxial layer,strike from the channel,and strike from the body diode region.High current and strong electric field simultaneously appear in the local area of SiC MOSFET,resulting in excessive power dissipation,further leading to excessive high lattice temperature.The gate-source junction area and the substrate-epitaxial layer junction area are both the regions where the SiC lattice temperature first reaches the SEB critical temperature.In the SEB simulation of SiC MOSFET at different incident depths,when the incident depth does not exceed the device's epitaxial layer,the heavy-ion-induced charge deposition is not enough to make lattice temperature reach the SEB critical temperature.     

A Numerical Study of Vortex and Precipitating Cloud Merging in Middle Latitudes

We mainly focus on the study of precipitating cloud merging associated with vortex merging. The vortex and precipitating cloud merging are simulated by the cloud resolving model from 0000 21 to 1800 23 July 2003. The results show that the model well simulates vortex circulation associated with precipitating clouds. It is also proven that the vortex merging follows the precipitating cloud merging although vortices show the spatial and temporal differences. The convection vorticity vector is introduced to describe the merging processes. Two merging cases are identified during the 42-h simulation and are studied.     

综合题新编选登

题167已知直三棱柱ABC-A1B1C1中有下列三个条件:①A1B⊥AC1;②A1B⊥B1C;③B1C1=A1C1.试利用①,②,③构造出一个你认为正确的命题,并加以证明.图1三棱柱解设C1A1=a,C1B1=b,C1C=c.A1B⊥AC1A1B·AC1=0(b-a c)(-a-c)=0-a·b a2-c2=0(1)A1B⊥B1CA1B·B1C=0(b-a c)(c-b)=0c2-b2 a·b=     

新题征展(69)

A 题组新编 1.已知ABCD为空间四边形,分别求下列情况下两对角线AC、BD所成的角: