Time calibration for the end cap TOF system of BESⅢ

The time calibration for end cap TOF system of BESⅢ is studied in this paper. It has achieved about 110 ps time resolution for muons in dimu events. The pulse height correction using electronic scan curve and the predicted time calculated using Kalman filter method are introduced. This paper also describes the study of using electrons and muons as calibration samples.     

BESIII barrel time-of-flight （TOF） calibration using cosmic ray data

The principle of the method for the BESIII TOF calibration using cosmic ray data without magnetic field are reported in this paper. After applying calibration constants, the single-end readout time resolution could reach about 150 ps, and the time resolution for one layer is achieved to be about 110 ps. The paper also described the extraction scheme for the event start time of cosmic events.     

A new method of waveform digitization based on time-interleaved A/D conversion

Time interleaved analog-to-digital conversion (TIADC) based on parallelism is an effective way to meet the requirement of the ultra-fast waveform digitizer beyond Gsps. Different methods to correct the mismatch errors among different analog-to-digital conversion channels have been developed previously. To overcome the speed limitation in hardware design and to implement the mismatch correction algorithm in real time,this paper proposes a fully parallel correction algorithm. A 12-bit 1-Gsps waveform digitizer with ENOB around 10.5 bit from 5 MHz to 200 MHz is implemented based on the real-time correction algorithm.     

A high dynamic range readout unit for a calorimeter

A high dynamic range readout system, consisting of a multi-dynode readout PMT and a VA32 chip, is presented. An LED system is set up to calibrate the relative gains between the dynodes, and the ADC counts per MIPs from dynode 7 are determined under cosmic-ray calibration. A dynamic range from 0.5 MIPs to 1×10⁵ MIPs is achieved.     

中国散裂中子源反角白光中子束流参数的初步测量

中国散裂中子源(CSNS)已于2018年5月建设完工,随后进行了试运行.其中的反角白光中子束线(Back-n)可用于中子核数据测量、中子物理研究和核技术应用等多方面的实验.本文报道对该中子束的品质参数测量实验过程以及最终实验结果.实验主要采用中子飞行时间法,利用~(235)U,~(238)U裂变室和~6Li-Si探测器测量了中子能谱和中子注量率,又利用闪烁体-互补金属氧化物半导体探测系统测量了中子束斑的剖面,得到了该束线的初步实验测量结果.其中白光中子的全能谱测量范围eV—100 MeV,给出了不确定度分析;给出了中子注量率两个实验厅位置的满功率值;给出了白光中子在直径60 mm情况下的全能区束斑.通过与模拟结果的比较探讨了以上结果的合理性,并提出了改进计划.这些实验结果为以后该束线的核数据测量和探测器标定实验奠定了基础.