SPME-GC/MS检测生态纺织品中持久性有机污染物

持久性有机污染物(POPs)能持久存在于环境中,并通过生物链(网)累积,对人类健康造成致癌、致畸、致突变性和内分泌干扰作用.其作为棉麻等种植中的杀虫剂可能在纤维上残留,从而通过与皮肤接触对人体造成伤害.     

硫酸氢季铵盐催化环氧化物和氮杂环丙烷的醇解反应

利用四丁基硫酸氢铵(TBAHS)和大孔树脂(D201型)支载的硫酸氢季铵盐(D201-HSO4), 分别催化环氧化合物或氮杂环丙烷与甲醇的开环反应, 以高产率得到β-甲氧基醇或β-甲氧基胺. 两种催化剂对该反应都很有效, 但大孔树脂支载的硫酸氢季铵盐(D201-HSO4)易于制备, 并可以重复使用.     

R-(+)-α-苯乙胺基草酰肼的拉曼光谱研究

酰肼类的衍生物是制备光学纯螺二酮的一种重要手性拆分剂, 因此, 对酰肼类衍生物结构研究就显得尤为重要。在本文中我们对手性拆分剂R-(+)-α-苯乙胺基草酰肼进行了拉曼光谱测试分析, 并对主要的谱峰进行了归属, 进一步证实了它的结构。     

Intrinsic stress analysis of sputtered carbon film

Intrinsic stresses of carbon films deposited by direct current （DC） magnetron sputtering were investigated. The bombardments of energetic particles during the growth of films were considered to be the main reason for compressive intrinsic stresses. The values of intrinsic stresses were determined by measuring the radius of curvature of substrates before and after film deposition. By varying argon pressure and target-substrate distance, energies of neutral carbon atoms impinging on the growing films were optimized to control the intrinsic stresses level. The stress evolution in carbon films as a function of film thickness was investigated and a void-related stress relief mechanism was proposed to interpret this evolution.     

高反射率Mo/B4C多层膜设计及制备

 运用遗传算法优化设计了Mo/B₄C多层膜结构。入射光入射角度取10°时,设计的理想多层膜膜对数为150,周期为3.59 nm,Gamma值（Mo膜厚与周期的比值）为0.41,峰值反射率为33.29%。采用恒功率模式直流磁控溅射方法制作Mo/B₄C多层膜。通过在Mo/B4C多层膜与基底之间增加15 nm厚的Cr粘附层,提高多层膜与基底的粘附力。另外,还采用调整多层膜Gamma值的方法减小其内应力,调整后多层膜结构周期为3.59 nm, Mo膜厚1.97 nm, B4C膜厚1.62 nm,峰值反射率26.34％。制备了膜对数为150的Mo/B₄C膜并测量了其反射率,在波长7.03 nm处,Mo/B₄C多层膜的近正入射反射率为21.0％。最后对测量结果进行了拟合,拟合得到Mo/B₄C多层膜的周期为3.60 nm,Gamma值0.60,界面粗糙度为0.30 nm。