煤中汞赋存形态及其热解时析出规律研究

利用程序升温热解反应系统,研究了煤中不同形态汞的析出温度,通过积分各析出温度下汞的总析出量来分析各赋存形态的汞所占比例,同时研究了添加CaCl2后抑制煤热解过程中汞析出的机理。结果表明,实验所选煤中汞主要存在三种赋存形态,其析出温度点分别在220、300和400℃;其中,300℃析出的汞所占比例最高,为54.18%,从析出温度分析该部分汞主要以HgS的形式赋存。添加CaCl2对第一和第三赋存形态的汞析出具有抑制作用,改变了其析出温度,对第二赋存形态的汞析出几乎无影响,添加后使得汞析出温度更为集中;抑制析出的主要原因是氧化吸附,添加CaCl2对汞总析出量基本无影响。     

新疆广播电视大学网络教学平台课程个性化学习系统的设计与安全机制研究

新疆广播电视大学的网络教学平台是新疆发展远程教育的骨干力量,提供双语教学,能够满足绝大部分教学需求,但是在教学内容与平台智能方面还未实现精细化教学的目标,难以实现因材施教.本文针对上述问题,引入了个性化学习理论,在现有网络教学平台上设计网上课程个性化学习系统架构,并对系统中的资源建设与管理、个性化设计以及安全性机制进行了探讨.网上课程个性化学习系统可以在确保教学平台安全可信的前提下提高教学质量,有利于学生的个人发展.     

Uniaxial stress influence on lattice, band gap and optical properties of n-type ZnO： first-principles calculations

The lattice,the band gap and the optical properties of n-type ZnO under uniaxial stress are investigated by firstprinciples calculations.The results show that the lattice constants change linearly with stress.Band gaps are broadened linearly as the uniaxial compressive stress increases.The change of band gap for n-type ZnO comes mainly from the contribution of stress in the c-axis direction,and the reason for band gap of n-type ZnO changing with stress is also explained.The calculated results of optical properties reveal that the imaginary part of the dielectric function decreases with the increase of uniaxial compressive stress at low energy.However,when the energy is higher than 4.0 eV,the imaginary part of the dielectric function increases with the increase of stress and a blueshift appears.There are two peaks in the absorption spectrum in an energy range of 4.0-13.0 eV.The stress coefficient of the band gap of n-type ZnO is larger than that of pure ZnO,which supplies the theoretical reference value for the modulation of the band gap of doped ZnO.     

High-sensitivity Bloch surface wave sensor with Fano resonance in grating-coupled multilayer structures

A new type of device consisting of a lithium niobate film coupled with a distributed Bragg reflector (DBR) was theoretically proposed to explore and release Bloch surface waves for applications in sensing and detection. The film and grating made of lithium niobate (LiNbO₃) were placed on both sides of the DBR and a concentrated electromagnetic field was formed at the film layer. By adjusting the spatial incidence angle of the incident light, two detection and analysis modes were obtained, including surface diffraction detection and guided Bloch detection. Surface diffraction detection was used to detect the gas molecule concentrations, while guided Bloch detection was applied for the concentration detection of biomolecule-modulated biological solutions. According to the drift of the Fano curve, the average sensor sensitivities from the analysis of the two modes were 1560 °/RIU and 1161 °/RIU, and the maximum detection sensitivity reached 2320 °/RIU and 2200 °/RIU, respectively. This study revealed the potential application of LiNbO₃ as a tunable material when combined with DBR to construct a new type of biosensor, which offered broad application prospects in Bloch surface wave biosensors.     

新型共沸混合工质HC170／FC116沸腾传热实验研究

实验测量了新型共沸混合工质HC170/FC116的池核沸腾传热特性.实验测量的加热面为紫铜表面,热流密度范围为50 kW/m2～300 kW/m2.同时实验结果与复叠温区常用制冷剂R503和R508B的传热性能进行了比较,发现新型共沸混合工质HC170/FC116的传热性能高于R508B.最后对实验数据回归得到了共沸混合工质传热系数计算关联式,此关联式的计算值与实验数据的偏差在士10%以内.     

Ba2+沉淀法提取生物油馏分中的酚类物质

从NaOH试剂浓度、反应温度与反应时间三个方面,对钡离子沉淀法提取不同温度段收集的生物油馏分中的酚类物质进行了实验研究,并利用气相色谱-质谱联用仪（GC-MS）对提取效果进行了分析。实验结果表明,钡离子沉淀法对愈创木酚类物质的提取效果较为突出,且NaOH浓度（1.0-6.0mol/L）、反应温度（30-50℃）与反应时间（10-40min）对愈创木酚的提取率影响较大。在NaOH浓度为5.5mol/L、反应温度为35℃、反应时间为20min时,提取率达到最大,其中,三个温度段收集的生物油即低温水相馏分、低温油相馏分与高温馏分中的愈创木酚提取率分别为34.1%、33.8%和33.5%。     

多孔硅-Au/Ag枝晶复合材料研究进展

基于金属包裹的多孔硅衬底具有制备成本低、检测能力强的优点。自20世纪表面增强拉曼散射(SERS)现象被发现以来,多孔硅-Au/Ag复合材料逐渐展现出作为SERS衬底的优势,被广泛应用于生物、化学、医疗等领域。本文综述了近些年来基于多孔硅复合Au/Ag纳米颗粒混合平台的研究,重点讨论了将贵金属Ag/Au复合于多孔硅衬底上的制备方法,介绍了它们在不同制备条件下枝晶结构的生长形貌和检测性能,并对多孔硅-Ag/Au枝晶复合结构作为SERS衬底的未来发展进行简要分析。     

Effect of staggered array structure on the flow field of micro gas chromatographic column

A new design of staggered array semi-packed micro gas chromatographic column was presented based on the micro electromechanical system(MEMS)technology.It was a sensor for gas sample analysis.The internal velocity fields of ten types of semi-packed micro gas chromatographic column were studied.The effects of array spacing and dislocation spacing on the flow field distribution were investigated.The results show that on the basis of ensuring the formation of virtual wall,with the increase of array spacing,the maximum velocity difference between the flow channels in the vertical direction decreases gradually,but the velocity difference in the flow channels a and b increases.When the inlet velocity was set to be 0.18 m/s,the maximum velocity difference in the channel of the staggered semi-packed micro gas chromatography column 3(CSAC3)was 0.05610 m/s.The maximum velocity difference in the channel a was 0.09160 m/s.The maximum velocity difference in the channel b was 0.02401 m/s.CSAC3 had a more uniform velocity field distribution,which can effectively suppress the laminar flow effect during chromatographic separation,and had a smaller pressure distribution,which puts forward lower requirements for carrier gas system.The staggered array semi-packed micro gas chromatography column proposed in this paper can effectively improve the velocity field distribution and pressure distribution in the channel,and provide a theoretical basis for the design of the new micro gas chromatography column structure.     

氮掺杂和空位对石墨烯纳米带热导率影响的分子动力学模拟

石墨烯是近年纳米材料研究领域的一个热点,其独特的热学性质受到了广泛关注,为了实现对石墨烯传热特性的预期与可控,利用氮掺杂和空位缺陷对石墨烯进行改性.采用非平衡态分子动力学方法研究了扶手形石墨烯纳米带中氮掺杂浓度、位置及空位缺陷对热导率影响并从理论上分析了热导率变化原因.研究表明氮掺杂后石墨烯纳米带热导率急剧下降,氮浓度达到30%时,热导率下降了75.8%;氮掺杂位置从冷浴向热浴移动过程中,热导率先近似的呈线性下降后上升;同时发现单原子三角形氮掺杂结构比多原子平行氮掺杂结构对热传递抑制作用强;空位缺陷的存在降低了石墨烯纳米带热导率,空位缺陷位置从冷浴向热浴移动过程中,热导率先下降后上升,空位缺陷距离冷浴边缘长度相对于整个石墨烯纳米带长度的3/10时,热导率达到最小.石墨烯纳米带热导率降低的原因主要源于结构中声子平均自由程和声子移动速度随着氮掺杂浓度、位置及空位缺陷位置的改变发生了明显变化.这些结果有利于纳米尺度下对石墨烯传热过程进行调控及为新材料的合成应用提供了理论支持.     

共沸混合工质HFC23/FC116沸腾传热实验研究

实验测量了二元共沸混合工质HFC23/FC116的池核沸腾传热特性。实验测量的加热面为紫铜表面,热流密度范围为50kW/m~2～300kw/m~2。同时实验结果与复叠温区常用制冷剂HFC13和R503的传热性能进行了比较。最后通过对实验数据进行多元回归分析,得到了共沸混合工质传热系数计算关联式,此关联式的计算值与实验值的偏差在±10%以内。