On the Theory of Acoustic Scanning of Damage to Underground Pipelines

Acoustical Physics - The paper studies the evolution of a pulsed signal initiated by the pushing of a cylindrical piston and propagating through a stationary fluid filling a buried pipeline with an...     

Electron energy spectrum in the field-ionized plasma

In this article, the effect of ionization on the energy spectrum of electrons within the interaction of a laser pulse with hydrogen atoms is investigated using particle-in-cell simulation codes. The results show that the behaviour of electrons' energy distribution function in the field-ionized plasma, which occurred due to the field ionization, compared with that in the pre-plasma strongly depends on the pulse shape. For short rise-time pulses (here 30 fs), due to the rapid enhancement of laser electric field, ionization occurs quickly, and as a result, there is not much difference in the electron energy in both the media. However, for pulses with rise time of 40 fs, in the pre-plasma state, the electron population reaches higher energies compared with the field-ionized plasma state. The main reason for this difference is the nonlinear wave breaking that happens earlier due to density inhomogeneity in the field-ionized plasma. On the other hand, at longer rise-time pulses (here 60 and 70 fs), electrons achieve higher energies in the field-ionized plasma than those in the case of pre-plasma. In this case, because of density fluctuations in the field-ionized plasma, the Raman backscattered radiations are seeded by a strong initial noise at the earlier times and the Mendonca condition for chaos threshold is met sooner. Therefore, the electrons gain more energy through the stochastic mechanism that is in agreement with chaotic nature of the motion.     

Phase Transitions in Frustrated ErBaCo4O7 + x (x = 0–0.06) Cobaltites at a Small Deviation from Stoichiometry

Journal of Experimental and Theoretical Physics - The structural (lattice metric) and elastic characteristics of ErBaCo4O7 + x cobaltites, which are subjected to different heat treatment and are...     

Quasi-solid state microscopic dynamics in equilibrium classical liquids: Self-consistent relaxation theory

Theoretical and Mathematical Physics - In the framework of the concept of time correlation functions, we develop a self-consistent relaxation theory of the transverse collective particle dynamics...     

Virtual Field Characterization for Ratcheting Effect Under Cyclic Loading

Experimental Mechanics - Ratcheting is an important mechanical behavior of metals and alloys, which is caused by the repeated accumulations of tensile and compressive strain in circle load....     

Nonlinear Optical Properties of Novel Metallophthalocyanines

Journal of Applied Spectroscopy - Detailed measurements of nonlinear optical properties and optical limiting for four phthalocyanine (Pc) derivatives (PcCo, PcCu, PcMn, and PcSi) are reported. The...     

High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.     

Synthesis and Structure of a New Ruthenium(II) Clathrochelate and the Use of a Highly Porous Ceramic Material with an Immobilized Complex in the Oxidative Conversion of Methane

Kinetics and Catalysis - A new ruthenium(II) cage complex with polar terminal groups in the apical substituents has been synthesized; the molecular design of the complex contributes to the...     

Key Role of a-Top CO on Terrace Sites of Metallic Pd Clusters for CO Oxidation

Pd-based catalysts are the most widely used for CO oxidation because of their outstanding catalytic activity and thermal stability. However, fundamental understanding of the detailed catalytic processes occurring on Pd-based catalysts under realistic conditions is still lacking. In this study, we investigated CO oxidation on metallic Pd clusters supported on Al₂O₃ and SiO₂. High-angle annular dark-field scanning transmission electron microscopy revealed the formation of similar-sized Pd clusters on Al₂O₃ and SiO₂. In contrast, CO chemisorption analysis indicated a gradual change in the dispersion of Pd (from 0.79 to 0.2) on Pd/Al₂O₃ and a marginal change in the dispersion (from 0.4 to 0.24) on Pd/SiO₂ as the Pd loading increased from 0.27 to 5.5 wt %; these changes were attributed to differences in the metal-support interactions. Diffuse reflectance infrared Fourier-transform spectroscopy revealed that fewer a-top CO species were present in Pd supported on Al₂O₃ than those in Pd supported on SiO₂, which is related to the morphological differences in the metallic Pd clusters on these two supports. Despite the different dispersion profiles and surface characteristics of Pd, O₂ titration demonstrated that linearly bound CO (with an infrared signal at 2090 cm⁻¹) reacted first with oxygen in the case of CO-saturated Pd on Al₂O₃ and SiO₂, which suggests that a-top CO on the terrace site plays an important role in CO oxidation. The experimental observations were corroborated by periodic density functional calculations, which confirmed that CO oxidation on the (111) terrace sites is most plausible, both kinetically and thermodynamically, compared to that on the edge or corner sites. This study will deepen the fundamental understanding of the effect of Pd clusters on CO oxidation under reaction conditions.     

The effect of scintillator materials on the fast neutron multiplicity measurement

Journal of Radioanalytical and Nuclear Chemistry - To analyze the effect of scintillator detectors on the fast neutron multiplicity, this paper uses Geant4 and Matlab to simulate and study three...