The novel 4-hydroxyphenylpyruvate dioxygenase inhibitors in vivo and in silico approach: 3D-QSAR analysis,molecular docking,bioassay and molecular dynamics

4-Hydroxyphenylpyruvate dioxygenase (HPPD) is not only an important target enzyme for the treatment of type I tyrosinemia, but also a new target for design bleaching herbicides, and it plays key role in the biosynthesis of tocopherol and plastoquinone. Thirty-six known active pyridine derivatives were collected, and comparative molecular field analysis (CoMFA) and comparative molecular similarity index analysis (CoMSIA) models based on common skeleton were constructed to obtain novel HPPD herbicides with higher activity. Two new HPPD inhibitors were rationally designed and synthesized according to the CoMFA and CoMSIA models and verified by enzyme activity, biological assays, and molecular docking. The promising compound W1 ((E)-5-(3-(4-bromophenyl)acryloyl)-6-hydroxy-2,3-dihydropyridin-4(1H)-one) showed better AtHPPD inhibitory activity, and the bioassay results revealed that some weeds showed bleaching symptoms. The good binding stability of W1 and protein was confirmed by molecular dynamics simulation in 100 ns. These results would be highly useful in the progress of new HPPD inhibitors discovery.     

碳酸钙固硫固体进样测汞仪快速测定硫化铅精矿中汞

在使用固体进样测汞仪直接测定硫化铅精矿中汞时,由于试样中硫含量通常较高(高达30%以上),在测定过程中大量的硫被氧化会污染甚至腐蚀固体进样测汞仪的核心部件催化管,导致催化管寿命严重缩短。为解决该问题,建立碳酸钙固硫-固体进样测汞仪直接测定硫化铅精矿中汞的分析方法;并对Ca/S比,分解温度,分解时间,齐化时间等参数进行优化。在最优条件下,Hg的含量在2~20 ng和20~500ng线性范围内回归系数(R²)分别为0.9996和0.9998;方法检出限(LOD)为0.006 μg/g。用该法对3个典型样品进行测定,相对标准偏差RSD≤9%(n=7),加标回收率为96%~106%。该方法简单、快捷,准确度和精密度高,适合硫化铅精矿中汞的快速测定。     

-电感耦合等离子体质谱法测定硅锰冶炼渣中8种金属元素

实验采用HCl-HNO₃-HF-HClO₄混合酸为消解体系对样品进行前处理,加入1.0 mL盐酸羟胺溶液(100 g/L)溶解残渣,选择合适的同位素,以¹⁰³Rh为内标测定Cr、Co、Ni、Cu、Zn和Cd,以¹⁹³Ir为内标测定Tl和Pb,建立了电感耦合等离子体质谱(ICP-MS)法测定硅锰冶炼渣中8种重金属元素的方法。实验发现,样品前处理选择HCl∶HNO₃∶HF∶HClO₄=5∶5∶5∶1,并在复溶阶段加入1.0 mL盐酸羟胺溶液(100 g/L)可以完全消解样品,实验采用KED模式和干扰系数校正法消除质谱干扰,样品中待测元素的测定结果不受基体成分的干扰。通过绘制校准曲线及测定流程空白,各元素校准曲线的相关系数均大于0.9999,方法检出限为0.006~0.19 mg/kg,方法定量限为0.018~0.57 mg/kg。对硅锰渣实际样品进行测定,各元素的相对标准偏差(RSD,n=11)在0.83%~4.1%,加标回收率为94.7%~106%;经过人员比对实验,相对偏差为-4.54%~4.24%。测定结果稳定可靠,能满足硅锰冶炼渣中8种微量金属元素含量的分析检测要求。     

Crystallographic characterization of three cathinone hydrochlorides new on the NPS market: 1-(4-methylphenyl)-2-(pyrrolidin-1-yl)hexan-1-one (4-MPHP), 4-methyl-1-phenyl-2-(pyrrolidin-1-yl)pentan-1-one (α-PiHP) and 2-(methylamino)-1-(4-methylphenyl)pentan-1-one (4-MPD)

Cathinones belong to a group of compounds of great interest in the new psychoactive substances (NPS) market. Constant changes to the chemical structure made by the producers of these compounds require a quick reaction from analytical laboratories in ascertaining their characteristics. In this article, three cathinone derivatives were characterized by X-ray crystallography. The investigated compounds were confirmed as: 1-[1-(4-methylphenyl)-1-oxohexan-2-yl]pyrrolidin-1-ium chloride ( 1 , C₁₇H₂₆NO⁺·Cl^?, the hydrochloride of 4-MPHP), 1-(4-methyl-1-oxo-1-phenylpentan-2-yl)pyrrolidin-1-ium chloride ( 2 ; C₁₆H₂₄NO⁺·Cl^?, the hydrochloride of α-PiHP) and methyl[1-(4-methylphenyl)-1-oxopentan-2-yl]azanium chloride ( 3 ; C₁₃H₂₀NO⁺·Cl^?, the hydrochloride of 4-MPD). All the salts crystallize in a monoclinic space group: 1 and 2 in P2₁/c, and 3 in P2₁/n. To the best of our knowledge, this study provides the first detailed and comprehensive crystallographic data on salts 1 – 3 .     

碰撞池-电感耦合等离子体质谱法测定芝麻中痕量的锗

建立了碰撞池-电感耦合等离子体质谱法测定芝麻中痕量的锗元素(germanium , Ge)。采用微波消解,碰撞池(KED模式)-电感耦合等离子体质谱检测,在线引入内标元素铑(Rh),同时消解液中加入3%正戊醇增敏。结果 3 % 正戊醇可使_⁷⁴Ge的上机检测信号强度提高2.85倍,_⁷⁴Ge校正曲线线性相关系数为1.00000,检出限为0.0555 μg/kg,加标回收率为92.0%~106%,相对标准偏差(relative standard deviation, RSD%)为2.6%~4.3%。采用建立的方法测定7种国家标准物质,检测结果均在认定值范围内,RSD%为2.5%~8.8%。结论 该方法灵敏度高、准确,可实现批量检测,适用于芝麻中痕量锗的检测。     

Coinage Metal Complexes of Bis(quinoline-2-ylmethyl)phenylphosphine-Simple Reactions Can Lead to Unprecedented Results

The different coordination behavior of the flexible yet sterically demanding, hemilabile P,N ligand bis(quinoline-2-ylmethyl)phenylphosphine ( bqmpp ) towards selected Cu^I, Ag^I and Au^I species is described. The resulting X-ray crystal structures reveal interesting coordination geometries. With [Cu(MeCN)₄]BF₄, compound 1 [Cu₂(bqmpp)₂](BF₄)₂ is obtained, wherein the copper(I) atoms display a distorted square planar and square pyramidal geometry. The steric demand and π-stacking of the ligand allow for a short Cu⋅⋅⋅Cu distance (2.588(9) Å). Cu^I complex 2 [Cu₄Cl₃(bqmpp)₂]BF₄ contains a rarely observed Cu₄Cl₃ cluster, probably enabled by dichloromethane as the chloride source. In the cluster, even shorter Cu⋅⋅⋅Cu distances (2.447(1) Å) are present. The reaction of Ag[SbF₆] with the ligand leads to a dinuclear compound ( 3 ) in solution as confirmed by ³¹P{¹H} NMR spectroscopy. During crystallization, instead of the expected phosphine complex 3 , a tris(quinoline-2-ylmethyl)bisphenyl-phosphine ( tqmbp ) compound [Ag₂(tqmbp)₂](SbF₆)₂ 4 is formed by elimination of quinaldine. The Au(I) compound [Au₂(bqmpp)₂]PF₆ ( 5 ) is prepared as expected and shows a linear arrangement of two phosphine ligands around Au^I.     

3D bioprinted cancer cells are more tolerant to serum starvation than 2D cells due to autophagy

Cancer is a global issue and a serious threat to human health, one approach to treatment is starvation therapy. Recently, three-dimensional (3D) bioprinted tumor tissue models have been developed; however, whether 3D bioprinted models are good for in vitro study of starvation therapy is unclear. In this study, we studied the state of cells with serum-free medium in both 3D bioprinted scaffold and 2D cell cultures and found that 3D bioprinted cancer cells (3D cells) were more tolerant to serum starvation than 2D cells in terms of cell viability, cell proliferation, and M2 macrophage polarization. Moreover, the ratio of LC3II/I, an index of autophagy, increased much more in 3D cells, and 3D cells showed more autophagosomes than 2D cells after serum starvation, which indicated that the autophagy levels were higher in 3D cells. These results suggested that 3D cells are more tolerant to serum starvation than 2D cells, and autophagy may play an important role in this process.     

One step nanoencapsulation of corrosion inhibitors for gradual release application

The direct application of corrosion inhibitors on metal surfaces is potentially dangerous for the environment and the restoration operators, thus new conservation strategies are mandatory. In this study, two copper corrosion inhibitors, 1H-benzotriazole (BTA) and 5-phenyl-1H-tetrazole (PT), are encapsulated in a silica nanocontainer, for future application in smart coatings, with the aim to reduce the amount of chemicals used in treatments, their dispersion in the environment and the direct exposure of the operators to these chemicals. In particular, composite silica nanocapsules, containing the corrosion inhibitors, are prepared via one-step synthesis, based on mini-emulsion polymerisation processes.The morphology, structure, and texture of these loaded silica nanocontainers are characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ physisorption (BET/BJH). Micro-Raman spectroscopy (RS) is performed to characterise the composition. UV–visible spectroscopy and thermal analysis (TG/DSC) are performed for the loading and encapsulation efficiency (L%, EE%) study.Synthesised nanocapsules show a core-shell structure and, when loaded with the inhibitors, have size ranging from about 130 to 170 nm and a BET surface area of the order of 800 m²/g. The EE% is maximum in the case of BTA and decreases to ～52% in the case of PT.     

Effective strategy for polymer synthesis: multicomponent reactions and click polymerization

The rational selection of organic reactions in polymer synthesis is an important research content of polymer science. In recent years, multicomponent reaction as an efficient and green synthesis method has attracted the wide attention of researchers, injecting new and powerful vitality into the field of polymer synthesis. In the study of multicomponent reaction, researchers found the intersection of multicomponent reaction and click chemistry and put forward the concept of Multicomponent Click Reaction (MCR-Click), which is a kind of Multicomponent Reaction with high activity, atomic economy, and some green chemical properties. The application of MCR in polymer chemistry is reviewed in this paper. It is expected that this reaction will arouse the attention of polymer chemists and play a new role in polymer science.     

In Silico Design and SAR Study of Dibenzyl Trisulfide Analogues for Improved CYP1A1 Inhibition

Dibenzyl trisulfide (DTS) is a natural compound with potential cancer-preventive properties occurring in Petiveria alliacea L., an ethnomedicinal plant native to the Americas. Previous studies revealed its inhibitory activity toward cytochrome P450 (CYP)1 enzymes, key in the activation of environmental pollutants. Accordingly, the aim of this study was to design novel DTS analogues, aimed at improving not only inhibitory activity, but also specificity toward CYP1A1. This was achieved by targeting interactions with CYP1A1 residues of identified importance. Three-dimensional structures for the novel analogues were subjected to molecular docking with several CYP isoforms, before being ranked in terms of binding affinity to CYP1A1. With three hydrogen bond donors, two hydrogen bond acceptors, a molecular mass of 361 Da, and a log P of 3.72, the most promising DTS analogue obeys Lipinski's rule of five. Following synthesis and in vitro validation of its CYP1A1-inhibitory properties, this compound may be useful in future cancer-preventive approaches.