Preparation and Optical Properties of SnO2／SiO2 Nanocomposite

SnO2/SiO2 nanocomposites have been prepared by the soaking-thermal-decomposing method, tin oxide nanoparticles are uniformly dispersed in the mesopores of silica. The optical absorption edge of the obtained nanocomposite presents a redshift compared with bulk tin oxide, With the increasing annealing temperature during the procedure of the sample preparation, the optical absorption edge of the sample moves to shorter wavelength (blueshift). These optical properties can be ascribed to the amorphous structure and band defects of surface layers of the tin oxide nanoparticles.     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.     

Co@SiO2核壳式纳米磁性粒子的合成、性质表征及在细胞分离和细胞芯片上的应用

合成了Co@SiO2核壳式纳米粒子,并采用透射电镜(TEM)、X射线衍射(XRD)、扫描电镜(SEM)和振动样品磁强计(VSM)对其形状、尺寸、荧光及磁特性进行了表征,探讨了其在细胞分离和细胞芯片上的应用和原理.     

Synthesis of GaN Nanorods by Ammoniating Ga2O3/ZnO Films

Large quantities of CaN nanorods are successfully synthesized on Si（111） substrates by ammoniating the films of Ga2O3/ZnO at 950℃ in a quartz tube. The structure, morphology and optical properties of the as-prepared CaN nanorods are studied by x-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and photoluminescence. The results show that the CaN nanorods have a hexagonal wurtzite structure with lengths of several micrometres and diameters from 80 nm to 300hm, which could supply an attractive potential to harmonically incorporate future GaN optoelectronic devices into Si-based large-scale integrated circuits. The growth mechanism is also briefly discussed.     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。     

尿样中核基质蛋白22的免疫电化学生物传感器研制

将(4,4',4',4')四羧基酞菁钴(CoTcPc)和HRP标记核基质蛋白22抗体(HRP-Ab-NMP22)一起固定在Au电极表面,构建了一种快速测定膀胱肿瘤患者尿液中NMP22抗原含量的安培免疫传感器(HRP-Ab-NMP22/Fe3O4/CoPc CME).实验表明:该传感器对NMP22抗原具有良好的电化学响应,HRP对H2O2电催化氧化电流I0降低,△I0与NMP22浓度在1.0～150ng·mL-1成线性关系,检测限则为0.5ng·mL-1.该传感器基于一次性竞争性免疫反应,较Elisa法提高了检测速度,有望用于膀胱肿瘤的迅速诊断.     

纳米累托石-TiO2光催化剂的制备及表征

以TiCl4和累托石为主要原料，制备出纳米累托石-TiO2粉末，并用X-衍射、透射电镜等对其进行表征．结果表明：纳米累托石-TiO2粉末平均直径为17．5nm当焙烧温度从500℃升至800℃时，累托石-TiO2粉末的比表面积从65．7m^2／g下降至3．3m^2／g，单位质量吸附剂的孔体积从0．1430cm。／u降到0．0213cm^3／g；当焙烧温度从300℃上升至500℃时，孔径变化不大，属中孔范围；当焙烧温度升至800℃时，一些孔道出现坍塌，不利于纳米累托石-TiO2粉末的光催化活性．