排序方式: 共有148条查询结果,搜索用时 62 毫秒
41.
42.
43.
44.
Two groups of coated conductor samples with different thicknesses of CeO2 cap layers deposited by pulsed laser deposition (PLD) under the same conditions have been studied. Of them, one group is of CeO2 films, which are deposited on stainless steel (SS) tapes coated by IBAD-YSZ (IBAD-YSZ/SS), and the other group is of CeO2/YSZ/Y2O3 multilayers, which are deposited on NiW substrates by PLD for the fabrication of YBCO-coated conductor through the RABiTS approach. YBCO film is then deposited on the tops of both types of buffer layers by PLD. The effects of the thickness of the CeO2 film on the texture of the CeO2 film and the critical current density (Jc) of the YBCO film are analysed. For the case of CeO2 film on IBAD-YSZ/SS, there appears a self-epitaxy effect with increasing thickness of the CeO2 film. For CeO2/YSZ/Y2O3/NiW, in which the buffer layers are deposited by PLD, there occurs no self-epitaxy effect, and the optimal thickness of CeO2 is about 50 nm. The surface morphologies of the two groups of samples are examined by SEM. 相似文献
45.
介绍了开式微波谐振腔测量系统的工作原理及试验结果,获得了Æ10mm 钢球模型在6.65kPa干燥空气中以速度5.44km .s-1飞行时的尾迹电子密度测量结果,并且与国外弹道靶试验数据进行了比较。试验结果表明,该系统能够满足模型尾迹电子密度变化对测量系统响应时间的要求,能很好地反映尾迹电子密度变化细节,电子密度测量范围达到109~1011cm -3。 相似文献
46.
本工作在沟槽型台阶衬底上用直流磁控溅射法外延生长YBa2Cu3O7-δ(YBCO)超导薄膜后,制备出台阶结和射频超导量子干涉器(rfSQUID).液氮中器件的磁通灵敏度和磁场灵敏度分别达到2.0×10-4Φ0/Hz和294fT/Hz.涂有真空导热硅脂作保护层的器件,至今寿命已达10个月,经历了30次以上(个别器件达50次)测试过程中从液氮到室温的冷热循环,性能没有明显的变化,表现出很好的稳定性.通过研究,解决了制备rfSQUID器件工艺过程中存在的一些问题,提高了制备器件的可重复性,得到高性能器件的成品率达到30%~50%. 相似文献
47.
48.
根据环形抛光的加工特点,研究了大口径反射元件的环形抛光加工工艺。在4 m环抛机上进行了610 mm440 mm85 mm的大口径反射元件加工工艺实验,研究了修正盘及工件盘转速与元件面形的关系、修正盘及工件盘位置与元件面形的关系、沥青盘槽形与元件面形的关系。研究结果表明,通过对修正盘及工件盘转速、修正盘及工件盘位置、沥青盘槽形等工艺参数的优化控制,能够得到大口径反射元件面形的高效收敛,元件最高面形精度优于/6(=632.8 nm),验证了加工工艺的有效性。 相似文献
49.
50.
分析了采用旋转涂膜法制备溶胶-凝胶SiO2减反膜过程中条纹缺陷产生的机理,利用含氟醇类试剂对减反膜溶胶进行改性,使溶胶链段柔顺性及流动性得到改善。在光学显微镜下对改性前后的膜层进行了对比和分析,对膜层的表面形貌、表面粗糙度以及透射比等特性进行了表征。结果表明:溶胶改性之后的膜层未出现条纹缺陷,表面粗糙度均方根值从4.55 nm下降到小于1.00 nm,膜层表面质量有了较大提高;改性前后膜层的增透性能相当,在熔石英基片上制备的膜层峰值透射比为99.60%~99.89%,膜层激光损伤阈值为21.0~25.3 J/cm2。 相似文献